Unit Pressure Developed at any Point in Fill at Depth Calculator

✖The Distance between Pipe and Fill refers to the distance between the upper part of pipe to lower end of fill.ⓘ Distance between Pipe and Fill [H]			+10% -10%
✖Superimposed Load Thermal Expansion Coefficient is a material property that is indicative of the extent to which a material expands upon heating.ⓘ Superimposed Load [P]			+10% -10%
✖The Slant Height refers to the height of a cone from the vertex to the periphery (rather than the center) of the base.ⓘ Slant Height [h_Slant]			+10% -10%

✖The Unit Pressure refers to a developed at any point in the fill at a depth of H below the surface.ⓘ Unit Pressure Developed at any Point in Fill at Depth [P_t]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Sewers their Construction , Maintenance and Required Appurtenances Formulas PDF PDF Image

Unit Pressure Developed at any Point in Fill at Depth Solution

STEP 0: Pre-Calculation Summary

Formula Used

Unit Pressure = (3*(Distance between Pipe and Fill)^3*Superimposed Load)/(2*pi*(Slant Height)^5)
P_t = (3*(H)^3*P)/(2*pi*(h_Slant)^5)
This formula uses 1 Constants, 4 Variables

Constants Used

pi - Archimedes' constant Value Taken As 3.14159265358979323846264338327950288

Variables Used

Unit Pressure - (Measured in Pascal) - The Unit Pressure refers to a developed at any point in the fill at a depth of H below the surface.
Distance between Pipe and Fill - (Measured in Meter) - The Distance between Pipe and Fill refers to the distance between the upper part of pipe to lower end of fill.
Superimposed Load - (Measured in Newton) - Superimposed Load Thermal Expansion Coefficient is a material property that is indicative of the extent to which a material expands upon heating.
Slant Height - (Measured in Meter) - The Slant Height refers to the height of a cone from the vertex to the periphery (rather than the center) of the base.

STEP 1: Convert Input(s) to Base Unit

Distance between Pipe and Fill: 3 Meter --> 3 Meter No Conversion Required
Superimposed Load: 10 Newton --> 10 Newton No Conversion Required
Slant Height: 1.5 Meter --> 1.5 Meter No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

P_t = (3*(H)^3*P)/(2*pi*(h_Slant)^5) --> (3*(3)^3*10)/(2*pi*(1.5)^5)

Evaluating ... ...

P_t = 16.9765272631355

STEP 3: Convert Result to Output's Unit

16.9765272631355 Pascal --> No Conversion Required

FINAL ANSWER

16.9765272631355 ≈ 16.97653 Pascal <-- Unit Pressure

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Civil » Environmental Engineering » Sewers their Construction , Maintenance and Required Appurtenances » Pressure Due to External Loads » Unit Pressure Developed at any Point in Fill at Depth

Credits

Created by Suraj Kumar

Birsa Institute of Technology (BIT), Sindri

Suraj Kumar has created this Calculator and 2100+ more calculators!

Verified by Ishita Goyal

Meerut Institute of Engineering and Technology (MIET), Meerut

Ishita Goyal has verified this Calculator and 2600+ more calculators!

< Pressure Due to External Loads Calculators

External Diameter of Pipe given Load Per Unit Length for Pipes

LaTeX Go External Diameter = sqrt(Load per unit Length/(Pipe Coefficient*Specific Weight of Fill))

Pipe Coefficient given Load Per Unit Length for Pipes

LaTeX Go Pipe Coefficient = (Load per unit Length/(Specific Weight of Fill*(External Diameter)^2))

Specific Weight of Fill Material given Load Per Unit Length for Pipes

LaTeX Go Specific Weight of Fill = Load per unit Length/(Pipe Coefficient*(External Diameter)^2)

Load Per Unit Length for Pipes Resting on Undisturbed Ground on Cohesion Less Soil

LaTeX Go Load per unit Length = Pipe Coefficient*Specific Weight of Fill*(External Diameter)^2

Unit Pressure Developed at any Point in Fill at Depth Formula

LaTeX Go

Unit Pressure = (3*(Distance between Pipe and Fill)^3*Superimposed Load)/(2*pi*(Slant Height)^5)
P_t = (3*(H)^3*P)/(2*pi*(h_Slant)^5)

What is pressure ?

Pressure is defined as the physical force exerted on an object. The force applied is perpendicular to the surface of objects per unit area. The basic formula for pressure is (Force per unit area).

How to Calculate Unit Pressure Developed at any Point in Fill at Depth?

Unit Pressure Developed at any Point in Fill at Depth calculator uses Unit Pressure = (3*(Distance between Pipe and Fill)^3*Superimposed Load)/(2*pi*(Slant Height)^5) to calculate the Unit Pressure, The Unit Pressure Developed at any Point in Fill at Depth calculates the unit pressure developed at any point when we have prior information of other parameters. Unit Pressure is denoted by P_t symbol.

How to calculate Unit Pressure Developed at any Point in Fill at Depth using this online calculator? To use this online calculator for Unit Pressure Developed at any Point in Fill at Depth, enter Distance between Pipe and Fill (H), Superimposed Load (P) & Slant Height (h_Slant) and hit the calculate button. Here is how the Unit Pressure Developed at any Point in Fill at Depth calculation can be explained with given input values -> 16.97653 = (3*(3)^3*10)/(2*pi*(1.5)^5).

FAQ

What is Unit Pressure Developed at any Point in Fill at Depth?

The Unit Pressure Developed at any Point in Fill at Depth calculates the unit pressure developed at any point when we have prior information of other parameters and is represented as P_t = (3*(H)^3*P)/(2*pi*(h_Slant)^5) or Unit Pressure = (3*(Distance between Pipe and Fill)^3*Superimposed Load)/(2*pi*(Slant Height)^5). The Distance between Pipe and Fill refers to the distance between the upper part of pipe to lower end of fill, Superimposed Load Thermal Expansion Coefficient is a material property that is indicative of the extent to which a material expands upon heating & The Slant Height refers to the height of a cone from the vertex to the periphery (rather than the center) of the base.

How to calculate Unit Pressure Developed at any Point in Fill at Depth?

The Unit Pressure Developed at any Point in Fill at Depth calculates the unit pressure developed at any point when we have prior information of other parameters is calculated using Unit Pressure = (3*(Distance between Pipe and Fill)^3*Superimposed Load)/(2*pi*(Slant Height)^5). To calculate Unit Pressure Developed at any Point in Fill at Depth, you need Distance between Pipe and Fill (H), Superimposed Load (P) & Slant Height (h_Slant). With our tool, you need to enter the respective value for Distance between Pipe and Fill, Superimposed Load & Slant Height and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search