Unbound Moisture Content based on Free and Equilibrium Moisture Content Calculator

✖The Equilibrium Moisture Content is defined as the ratio of the weight of moisture in equilibrium with the solid to the weight of dry solid.ⓘ Equilibrium Moisture Content [X_Eq]			+10% -10%
✖The Free Moisture Content is the ratio of amount of free moisture present in the solids to that of the weight of dry solid.ⓘ Free Moisture Content [X_Free]			+10% -10%
✖The Bound Moisture Content is defined as the ratio of the weight of moisture exerting vapour pressure less than that of pure water at the same temperature to the weight of dry solid.ⓘ Bound Moisture Content [X_b]			+10% -10%

✖The Unbound Moisture Content is defined as the ratio of the weight of moisture exerting vapour pressure equal to than of pure water at the same temperature to the weight of dry solid.ⓘ Unbound Moisture Content based on Free and Equilibrium Moisture Content [X_Ub]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Drying Formula PDF PDF Image

Unbound Moisture Content based on Free and Equilibrium Moisture Content Solution

STEP 0: Pre-Calculation Summary

Formula Used

Unbound Moisture Content = Equilibrium Moisture Content+Free Moisture Content-Bound Moisture Content
X_Ub = X_Eq+X_Free-X_b
This formula uses 4 Variables

Variables Used

Unbound Moisture Content - The Unbound Moisture Content is defined as the ratio of the weight of moisture exerting vapour pressure equal to than of pure water at the same temperature to the weight of dry solid.
Equilibrium Moisture Content - The Equilibrium Moisture Content is defined as the ratio of the weight of moisture in equilibrium with the solid to the weight of dry solid.
Free Moisture Content - The Free Moisture Content is the ratio of amount of free moisture present in the solids to that of the weight of dry solid.
Bound Moisture Content - The Bound Moisture Content is defined as the ratio of the weight of moisture exerting vapour pressure less than that of pure water at the same temperature to the weight of dry solid.

STEP 1: Convert Input(s) to Base Unit

Equilibrium Moisture Content: 0.05 --> No Conversion Required
Free Moisture Content: 0.32 --> No Conversion Required
Bound Moisture Content: 0.06 --> No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

X_Ub = X_Eq+X_Free-X_b --> 0.05+0.32-0.06

Evaluating ... ...

X_Ub = 0.31

STEP 3: Convert Result to Output's Unit

0.31 --> No Conversion Required

FINAL ANSWER

0.31 <-- Unbound Moisture Content

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Chemical Engineering » Mass Transfer Operations » Drying » Moisture Content » Unbound Moisture Content based on Free and Equilibrium Moisture Content

Credits

Created by Vaibhav Mishra

DJ Sanghvi College of Engineering (DJSCE), Mumbai

Vaibhav Mishra has created this Calculator and 300+ more calculators!

Verified by Prerana Bakli

University of Hawaiʻi at Mānoa (UH Manoa), Hawaii, USA

Prerana Bakli has verified this Calculator and 1600+ more calculators!

< Moisture Content Calculators

Initial Moisture Content based on Free and Equlibrium Moisture Content

LaTeX Go Initial Moisture Content = Equilibrium Moisture Content+Free Moisture Content

Free Moisture Content based on Equilibrium Moisture Content

LaTeX Go Free Moisture Content = Initial Moisture Content-Equilibrium Moisture Content

Equilibrium Moisture Content based on Free Moisture Content

LaTeX Go Equilibrium Moisture Content = Initial Moisture Content-Free Moisture Content

Unbound Moisture Content based on Bound Moisture Content

LaTeX Go Unbound Moisture Content = Initial Moisture Content-Bound Moisture Content

Unbound Moisture Content based on Free and Equilibrium Moisture Content Formula

LaTeX Go

Unbound Moisture Content = Equilibrium Moisture Content+Free Moisture Content-Bound Moisture Content
X_Ub = X_Eq+X_Free-X_b

What is Drying Mass Transfer operation?

Drying is a mass transfer operation that involves the removal of moisture or other volatile solvents from a solid material. The process of drying is used in a variety of industries, including food processing, pharmaceuticals, chemicals, and textiles. In drying, heat is applied to the material to increase its temperature, which causes the moisture or solvent to evaporate. The evaporated moisture is then removed from the material using a drying medium, such as air, which carries away the moisture as it flows over the surface of the material. There are several types of drying techniques, including convection drying, which uses hot air to remove moisture; radiation drying, which uses infrared radiation to heat the material and remove moisture; and vacuum drying, which removes moisture by creating a low-pressure environment.

How to Calculate Unbound Moisture Content based on Free and Equilibrium Moisture Content?

Unbound Moisture Content based on Free and Equilibrium Moisture Content calculator uses Unbound Moisture Content = Equilibrium Moisture Content+Free Moisture Content-Bound Moisture Content to calculate the Unbound Moisture Content, The Unbound Moisture Content based on Free and Equilibrium Moisture Content formula is defined as Unbound Moisture i,e, the moisture that is not bound with the solid as a difference between initial moisture content and bound moisture content where initial moisture content is represented as a sum of Equilibrium and Free Moisture Content. Unbound Moisture Content is denoted by X_Ub symbol.

How to calculate Unbound Moisture Content based on Free and Equilibrium Moisture Content using this online calculator? To use this online calculator for Unbound Moisture Content based on Free and Equilibrium Moisture Content, enter Equilibrium Moisture Content (X_Eq), Free Moisture Content (X_Free) & Bound Moisture Content (X_b) and hit the calculate button. Here is how the Unbound Moisture Content based on Free and Equilibrium Moisture Content calculation can be explained with given input values -> 0.31 = 0.05+0.32-0.06.

FAQ

What is Unbound Moisture Content based on Free and Equilibrium Moisture Content?

The Unbound Moisture Content based on Free and Equilibrium Moisture Content formula is defined as Unbound Moisture i,e, the moisture that is not bound with the solid as a difference between initial moisture content and bound moisture content where initial moisture content is represented as a sum of Equilibrium and Free Moisture Content and is represented as X_Ub = X_Eq+X_Free-X_b or Unbound Moisture Content = Equilibrium Moisture Content+Free Moisture Content-Bound Moisture Content. The Equilibrium Moisture Content is defined as the ratio of the weight of moisture in equilibrium with the solid to the weight of dry solid, The Free Moisture Content is the ratio of amount of free moisture present in the solids to that of the weight of dry solid & The Bound Moisture Content is defined as the ratio of the weight of moisture exerting vapour pressure less than that of pure water at the same temperature to the weight of dry solid.

How to calculate Unbound Moisture Content based on Free and Equilibrium Moisture Content?

The Unbound Moisture Content based on Free and Equilibrium Moisture Content formula is defined as Unbound Moisture i,e, the moisture that is not bound with the solid as a difference between initial moisture content and bound moisture content where initial moisture content is represented as a sum of Equilibrium and Free Moisture Content is calculated using Unbound Moisture Content = Equilibrium Moisture Content+Free Moisture Content-Bound Moisture Content. To calculate Unbound Moisture Content based on Free and Equilibrium Moisture Content, you need Equilibrium Moisture Content (X_Eq), Free Moisture Content (X_Free) & Bound Moisture Content (X_b). With our tool, you need to enter the respective value for Equilibrium Moisture Content, Free Moisture Content & Bound Moisture Content and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Unbound Moisture Content?

In this formula, Unbound Moisture Content uses Equilibrium Moisture Content, Free Moisture Content & Bound Moisture Content. We can use 1 other way(s) to calculate the same, which is/are as follows -

Unbound Moisture Content = Initial Moisture Content-Bound Moisture Content

Home

FREE PDFs

🔍 Search