Ultimate Tensile Stress for Plate Calculator

✖Edge Load per unit Width is the force acting on the edges of an object having a unit width.ⓘ Edge Load per Unit Width [P]			+10% -10%
✖Distance between Rivets is the space between the two rivets present in a joint.ⓘ Distance between Rivets [b]			+10% -10%
✖Plate Thickness is the distance through the bearing plate.ⓘ Plate Thickness [p_t]			+10% -10%
✖Diameter of Rivet is somewhat equal to diameter of the hole in which rivetting is to be done. It is the diameter of the shank length of a rivet.ⓘ Diameter of Rivet [D_rivet]			+10% -10%

✖Ultimate Tensile Strength (UTS) is the maximum stress that a material can withstand while being stretched or pulled.ⓘ Ultimate Tensile Stress for Plate [S_ut]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Structural Design Formulas PDF PDF Image

Ultimate Tensile Stress for Plate Solution

STEP 0: Pre-Calculation Summary

Formula Used

Ultimate Tensile Strength = (Edge Load per Unit Width*Distance between Rivets)/(Plate Thickness*(Distance between Rivets-Diameter of Rivet))
S_ut = (P*b)/(p_t*(b-D_rivet))
This formula uses 5 Variables

Variables Used

Ultimate Tensile Strength - (Measured in Pascal) - Ultimate Tensile Strength (UTS) is the maximum stress that a material can withstand while being stretched or pulled.
Edge Load per Unit Width - (Measured in Newton per Meter) - Edge Load per unit Width is the force acting on the edges of an object having a unit width.
Distance between Rivets - (Measured in Meter) - Distance between Rivets is the space between the two rivets present in a joint.
Plate Thickness - (Measured in Meter) - Plate Thickness is the distance through the bearing plate.
Diameter of Rivet - (Measured in Meter) - Diameter of Rivet is somewhat equal to diameter of the hole in which rivetting is to be done. It is the diameter of the shank length of a rivet.

STEP 1: Convert Input(s) to Base Unit

Edge Load per Unit Width: 37.7 Newton per Millimeter --> 37700 Newton per Meter (Check conversion here)
Distance between Rivets: 1285 Millimeter --> 1.285 Meter (Check conversion here)
Plate Thickness: 94 Millimeter --> 0.094 Meter (Check conversion here)
Diameter of Rivet: 24 Millimeter --> 0.024 Meter (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

S_ut = (P*b)/(p_t*(b-D_rivet)) --> (37700*1.285)/(0.094*(1.285-0.024))

Evaluating ... ...

S_ut = 408697.082693573

STEP 3: Convert Result to Output's Unit

408697.082693573 Pascal -->0.408697082693573 Newton per Square Millimeter (Check conversion here)

FINAL ANSWER

0.408697082693573 ≈ 0.408697 Newton per Square Millimeter <-- Ultimate Tensile Strength

(Calculation completed in 00.020 seconds)

You are here -

Home » Physics » Aircraft Mechanics » Aircraft Design » Conceptual Design » Aerospace » Structural Design » Ultimate Tensile Stress for Plate

Credits

Created by Shreyash

Rajiv Gandhi Institute of Technology (RGIT), Mumbai

Shreyash has created this Calculator and 10+ more calculators!

Verified by Akshat Nama

Indian Institute of Information Technology, Design And Manufacturing (IIITDM ), Jabalpur

Akshat Nama has verified this Calculator and 10+ more calculators!

< Structural Design Calculators

Maximum Blade Efficiency

LaTeX Go Maximum Blade Efficiency = (2*Blade Lift Force/Blade Drag Force-1)/(2*Blade Lift Force/Blade Drag Force+1)

Shear Load per width

LaTeX Go Edge Load per Unit Width = (pi*(Diameter^2)*Maximum Shear Stress)/(4*Distance between Rivets)

Disk Loading

LaTeX Go Load = Aircraft Weight/((pi*Diameter of Rotor^2)/4)

Average Blade Lift Coefficient

LaTeX Go Blade Lift Coefficient = 6*Thrust Coefficient/Rotor Solidity

Ultimate Tensile Stress for Plate Formula

LaTeX Go

Ultimate Tensile Strength = (Edge Load per Unit Width*Distance between Rivets)/(Plate Thickness*(Distance between Rivets-Diameter of Rivet))
S_ut = (P*b)/(p_t*(b-D_rivet))

What are rivets?

Rivet is a metal headed pin or bolt with a second head that is used to join two or more components by inserting the shank through a hole in each piece before beating or pressing down the plain end.

What is ultimate tensile stress (UTS)?

The maximum stress that a particular material can withstand when a force is applied is known as the ultimate tensile stress (UTS).

How to Calculate Ultimate Tensile Stress for Plate?

Ultimate Tensile Stress for Plate calculator uses Ultimate Tensile Strength = (Edge Load per Unit Width*Distance between Rivets)/(Plate Thickness*(Distance between Rivets-Diameter of Rivet)) to calculate the Ultimate Tensile Strength, Ultimate Tensile Stress for Plate is the maximum stress that a material can withstand before it fractures or fails under tension, it is a fundamental property of the material and is critical in engineering design to ensure that structures can withstand applied loads without failure. Ultimate Tensile Strength is denoted by S_ut symbol.

How to calculate Ultimate Tensile Stress for Plate using this online calculator? To use this online calculator for Ultimate Tensile Stress for Plate, enter Edge Load per Unit Width (P), Distance between Rivets (b), Plate Thickness (p_t) & Diameter of Rivet (D_rivet) and hit the calculate button. Here is how the Ultimate Tensile Stress for Plate calculation can be explained with given input values -> 4E-7 = (37700*1.285)/(0.094*(1.285-0.024)).

FAQ

What is Ultimate Tensile Stress for Plate?

Ultimate Tensile Stress for Plate is the maximum stress that a material can withstand before it fractures or fails under tension, it is a fundamental property of the material and is critical in engineering design to ensure that structures can withstand applied loads without failure and is represented as S_ut = (P*b)/(p_t*(b-D_rivet)) or Ultimate Tensile Strength = (Edge Load per Unit Width*Distance between Rivets)/(Plate Thickness*(Distance between Rivets-Diameter of Rivet)). Edge Load per unit Width is the force acting on the edges of an object having a unit width, Distance between Rivets is the space between the two rivets present in a joint, Plate Thickness is the distance through the bearing plate & Diameter of Rivet is somewhat equal to diameter of the hole in which rivetting is to be done. It is the diameter of the shank length of a rivet.

How to calculate Ultimate Tensile Stress for Plate?

Ultimate Tensile Stress for Plate is the maximum stress that a material can withstand before it fractures or fails under tension, it is a fundamental property of the material and is critical in engineering design to ensure that structures can withstand applied loads without failure is calculated using Ultimate Tensile Strength = (Edge Load per Unit Width*Distance between Rivets)/(Plate Thickness*(Distance between Rivets-Diameter of Rivet)). To calculate Ultimate Tensile Stress for Plate, you need Edge Load per Unit Width (P), Distance between Rivets (b), Plate Thickness (p_t) & Diameter of Rivet (D_rivet). With our tool, you need to enter the respective value for Edge Load per Unit Width, Distance between Rivets, Plate Thickness & Diameter of Rivet and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search