Ultimate Strength when Wind and Earthquake Loads are not Applied Calculator

✖Dead Load consisting of basic load plus volume change due to (shrinkage,temperature).ⓘ Dead Load [DL]			+10% -10%
✖Live Load are variable as they depend on usage and capacity.ⓘ Live Load [LL]			+10% -10%

✖ultimate strengths is the capacities to resist design loads and their related internal moments and forces.ⓘ Ultimate Strength when Wind and Earthquake Loads are not Applied [U]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Design of Two Way Slab System and Footing Formulas PDF PDF Image

Ultimate Strength when Wind and Earthquake Loads are not Applied Solution

STEP 0: Pre-Calculation Summary

Formula Used

Ultimate Strength = (1.4*Dead Load)+(1.7*Live Load)
U = (1.4*DL)+(1.7*LL)
This formula uses 3 Variables

Variables Used

Ultimate Strength - (Measured in Pascal) - ultimate strengths is the capacities to resist design loads and their related internal moments and forces.
Dead Load - (Measured in Pascal) - Dead Load consisting of basic load plus volume change due to (shrinkage,temperature).
Live Load - (Measured in Pascal) - Live Load are variable as they depend on usage and capacity.

STEP 1: Convert Input(s) to Base Unit

Dead Load: 10.01 Kilonewton per Square Meter --> 10010 Pascal (Check conversion here)
Live Load: 5 Kilonewton per Square Meter --> 5000 Pascal (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

U = (1.4*DL)+(1.7*LL) --> (1.4*10010)+(1.7*5000)

Evaluating ... ...

U = 22514

STEP 3: Convert Result to Output's Unit

22514 Pascal -->22.514 Kilonewton per Square Meter (Check conversion here)

FINAL ANSWER

22.514 Kilonewton per Square Meter <-- Ultimate Strength

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Civil » Structural Engineering » Concrete Structures » Design of Two Way Slab System and Footing » Partial Safety Factors for Loads » Ultimate Strength when Wind and Earthquake Loads are not Applied

Credits

Created by Suraj Kumar

Birsa Institute of Technology (BIT), Sindri

Suraj Kumar has created this Calculator and 2100+ more calculators!

Verified by Alithea Fernandes

Don Bosco College of Engineering (DBCE), Goa

Alithea Fernandes has verified this Calculator and 100+ more calculators!

< Partial Safety Factors for Loads Calculators

Basic Load Effect given Ultimate Strength for Unapplied Wind and Earthquake Loads

LaTeX Go Dead Load = (Ultimate Strength-(1.7*Live Load))/(1.4)

Live Load Effect given Ultimate Strength for Unapplied Wind and Earthquake Loads

LaTeX Go Live Load = (Ultimate Strength-(1.4*Dead Load))/(1.7)

Ultimate Strength when Wind and Earthquake Loads are not Applied

LaTeX Go Ultimate Strength = (1.4*Dead Load)+(1.7*Live Load)

Ultimate Strength when Wind Loads are Applied

LaTeX Go Ultimate Strength = (0.9*Dead Load)+(1.3*Wind Load)

Ultimate Strength when Wind and Earthquake Loads are not Applied Formula

LaTeX Go

Ultimate Strength = (1.4*Dead Load)+(1.7*Live Load)
U = (1.4*DL)+(1.7*LL)

What is Ultimate Strength?

The capacities to resist design loads and their related internal moments and forces is known as ultimate strength.

How to Calculate Ultimate Strength when Wind and Earthquake Loads are not Applied?

Ultimate Strength when Wind and Earthquake Loads are not Applied calculator uses Ultimate Strength = (1.4*Dead Load)+(1.7*Live Load) to calculate the Ultimate Strength, The Ultimate Strength when Wind and Earthquake Loads are not Applied formula is defined as total strength due to dead load of structure and live load on the structure. Ultimate Strength is denoted by U symbol.

How to calculate Ultimate Strength when Wind and Earthquake Loads are not Applied using this online calculator? To use this online calculator for Ultimate Strength when Wind and Earthquake Loads are not Applied, enter Dead Load (DL) & Live Load (LL) and hit the calculate button. Here is how the Ultimate Strength when Wind and Earthquake Loads are not Applied calculation can be explained with given input values -> 0.0225 = (1.4*10010)+(1.7*5000).

FAQ

What is Ultimate Strength when Wind and Earthquake Loads are not Applied?

The Ultimate Strength when Wind and Earthquake Loads are not Applied formula is defined as total strength due to dead load of structure and live load on the structure and is represented as U = (1.4*DL)+(1.7*LL) or Ultimate Strength = (1.4*Dead Load)+(1.7*Live Load). Dead Load consisting of basic load plus volume change due to (shrinkage,temperature) & Live Load are variable as they depend on usage and capacity.

How to calculate Ultimate Strength when Wind and Earthquake Loads are not Applied?

The Ultimate Strength when Wind and Earthquake Loads are not Applied formula is defined as total strength due to dead load of structure and live load on the structure is calculated using Ultimate Strength = (1.4*Dead Load)+(1.7*Live Load). To calculate Ultimate Strength when Wind and Earthquake Loads are not Applied, you need Dead Load (DL) & Live Load (LL). With our tool, you need to enter the respective value for Dead Load & Live Load and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Ultimate Strength?

In this formula, Ultimate Strength uses Dead Load & Live Load. We can use 1 other way(s) to calculate the same, which is/are as follows -

Ultimate Strength = (0.9*Dead Load)+(1.3*Wind Load)

Home

FREE PDFs

🔍 Search