Ultimate Bearing Capacity provided Angle of Inclination from Horizontal Calculator

✖Unit Weight of Soil mass is the ratio of the total weight of soil to the total volume of soil.ⓘ Unit Weight of Soil [γ]			+10% -10%
✖Depth of Footing is the longer dimension of the footing.ⓘ Depth of Footing [D]			+10% -10%
✖Angle of Inclination to Horizontal in Soil is defined as the angle measured from the horizontal surface of the wall or any object.ⓘ Angle of Inclination to Horizontal in Soil [i]			+10% -10%

✖Net Ultimate Bearing Capacity is the minimum net pressure intensity causing shear failure.ⓘ Ultimate Bearing Capacity provided Angle of Inclination from Horizontal [q_nf]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Geotechnical Engineering Formula PDF PDF Image

Ultimate Bearing Capacity provided Angle of Inclination from Horizontal Solution

STEP 0: Pre-Calculation Summary

Formula Used

Net Ultimate Bearing Capacity = Unit Weight of Soil*Depth of Footing*(tan(Angle of Inclination to Horizontal in Soil))^4
q_nf = γ*D*(tan(i))^4
This formula uses 1 Functions, 4 Variables

Functions Used

tan - The tangent of an angle is a trigonometric ratio of the length of the side opposite an angle to the length of the side adjacent to an angle in a right triangle., tan(Angle)

Variables Used

Net Ultimate Bearing Capacity - (Measured in Pascal) - Net Ultimate Bearing Capacity is the minimum net pressure intensity causing shear failure.
Unit Weight of Soil - (Measured in Kilonewton per Cubic Meter) - Unit Weight of Soil mass is the ratio of the total weight of soil to the total volume of soil.
Depth of Footing - (Measured in Meter) - Depth of Footing is the longer dimension of the footing.
Angle of Inclination to Horizontal in Soil - (Measured in Radian) - Angle of Inclination to Horizontal in Soil is defined as the angle measured from the horizontal surface of the wall or any object.

STEP 1: Convert Input(s) to Base Unit

Unit Weight of Soil: 18 Kilonewton per Cubic Meter --> 18 Kilonewton per Cubic Meter No Conversion Required
Depth of Footing: 15.2 Meter --> 15.2 Meter No Conversion Required
Angle of Inclination to Horizontal in Soil: 64 Degree --> 1.11701072127616 Radian (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

q_nf = γ*D*(tan(i))^4 --> 18*15.2*(tan(1.11701072127616))^4

Evaluating ... ...

q_nf = 4834.91668470855

STEP 3: Convert Result to Output's Unit

4834.91668470855 Pascal -->4.83491668470855 Kilonewton per Square Meter (Check conversion here)

FINAL ANSWER

4.83491668470855 ≈ 4.834917 Kilonewton per Square Meter <-- Net Ultimate Bearing Capacity

(Calculation completed in 00.008 seconds)

You are here -

Home » Engineering » Civil » Geotechnical Engineering » Minimum Depth of Foundation by Rankine's Analysis » Ultimate Bearing Capacity provided Angle of Inclination from Horizontal

Credits

Created by Suraj Kumar

Birsa Institute of Technology (BIT), Sindri

Suraj Kumar has created this Calculator and 2100+ more calculators!

Verified by Ishita Goyal

Meerut Institute of Engineering and Technology (MIET), Meerut

Ishita Goyal has verified this Calculator and 2600+ more calculators!

< Minimum Depth of Foundation by Rankine's Analysis Calculators

Major Stress during Shear Failure by Rankine Analysis

LaTeX Go Major Principal Stress in Soil = Minor Principal Stress in Soil*(tan((Angle of Inclination to Horizontal in Soil*180)/pi))^2+(2*Cohesion of Soil*tan((Angle of Inclination to Horizontal in Soil*180)/pi))

Minor Normal Stress during Shear Failure by Rankine Analysis

LaTeX Go Minor Principal Stress in Soil = (Major Principal Stress in Soil-(2*Cohesion of Soil*tan((Angle of Inclination to Horizontal in Soil))))/(tan((Angle of Inclination to Horizontal in Soil)))^2

Minor Normal Stress given Unit Weight of Soil

LaTeX Go Minor Principal Stress in Soil = Unit Weight of Soil*Depth of Footing

Unit Weight of Soil given Minor Normal Stress

LaTeX Go Unit Weight of Soil = Minor Principal Stress in Soil/Depth of Footing

Ultimate Bearing Capacity provided Angle of Inclination from Horizontal Formula

LaTeX Go

Net Ultimate Bearing Capacity = Unit Weight of Soil*Depth of Footing*(tan(Angle of Inclination to Horizontal in Soil))^4
q_nf = γ*D*(tan(i))^4

What is Ultimate Bearing Capacity?

The ultimate bearing capacity of a foundation denotes the maximum load that foundation soils can withstand, and its reasonable determination is one of the pivotal parts in foundation designs. Numerous studies about the ultimate bearing capacity of strip foundations are focused on saturated soils.

How to Calculate Ultimate Bearing Capacity provided Angle of Inclination from Horizontal?

Ultimate Bearing Capacity provided Angle of Inclination from Horizontal calculator uses Net Ultimate Bearing Capacity = Unit Weight of Soil*Depth of Footing*(tan(Angle of Inclination to Horizontal in Soil))^4 to calculate the Net Ultimate Bearing Capacity, The Ultimate Bearing Capacity provided Angle of Inclination from Horizontal is defined as the maximum vertical pressure that can be applied to ground surface, at which point shear failure mechanism develops in supporting soil. Net Ultimate Bearing Capacity is denoted by q_nf symbol.

How to calculate Ultimate Bearing Capacity provided Angle of Inclination from Horizontal using this online calculator? To use this online calculator for Ultimate Bearing Capacity provided Angle of Inclination from Horizontal, enter Unit Weight of Soil (γ), Depth of Footing (D) & Angle of Inclination to Horizontal in Soil (i) and hit the calculate button. Here is how the Ultimate Bearing Capacity provided Angle of Inclination from Horizontal calculation can be explained with given input values -> 283.0356 = 18000*15.2*(tan(1.11701072127616))^4.

FAQ

What is Ultimate Bearing Capacity provided Angle of Inclination from Horizontal?

The Ultimate Bearing Capacity provided Angle of Inclination from Horizontal is defined as the maximum vertical pressure that can be applied to ground surface, at which point shear failure mechanism develops in supporting soil and is represented as q_nf = γ*D*(tan(i))^4 or Net Ultimate Bearing Capacity = Unit Weight of Soil*Depth of Footing*(tan(Angle of Inclination to Horizontal in Soil))^4. Unit Weight of Soil mass is the ratio of the total weight of soil to the total volume of soil, Depth of Footing is the longer dimension of the footing & Angle of Inclination to Horizontal in Soil is defined as the angle measured from the horizontal surface of the wall or any object.

How to calculate Ultimate Bearing Capacity provided Angle of Inclination from Horizontal?

The Ultimate Bearing Capacity provided Angle of Inclination from Horizontal is defined as the maximum vertical pressure that can be applied to ground surface, at which point shear failure mechanism develops in supporting soil is calculated using Net Ultimate Bearing Capacity = Unit Weight of Soil*Depth of Footing*(tan(Angle of Inclination to Horizontal in Soil))^4. To calculate Ultimate Bearing Capacity provided Angle of Inclination from Horizontal, you need Unit Weight of Soil (γ), Depth of Footing (D) & Angle of Inclination to Horizontal in Soil (i). With our tool, you need to enter the respective value for Unit Weight of Soil, Depth of Footing & Angle of Inclination to Horizontal in Soil and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search