Turning radius of outer rear wheel while cornering Calculator

✖Wheelbase of Vehicle is the center distance between the front and the rear axle of the vehicle.ⓘ Wheelbase of Vehicle [b]			+10% -10%
✖Angle of Outside Wheel Lock is the angle through which outer wheel of vehicle steers while cornering.ⓘ Angle of Outside Wheel Lock [φ]			+10% -10%
✖Track Width of Vehicle is the distance between the center line of each of the two wheels on the same axle (front/rear axle).ⓘ Track Width of Vehicle [a_tw]			+10% -10%
✖Distance between Front Wheel Pivot Center is the distance between those points about which both front wheels pivot while cornering.ⓘ Distance between Front Wheel Pivot Center [c]			+10% -10%

✖Turning Radius of Outer Rear Wheel while cornering is the radius of circle traced by outer rear wheel while cornering.ⓘ Turning radius of outer rear wheel while cornering [R_or]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Turning Dynamics Formulas PDF PDF Image

Turning radius of outer rear wheel while cornering Solution

STEP 0: Pre-Calculation Summary

Formula Used

Turning Radius of Outer Rear Wheel = (Wheelbase of Vehicle/tan(Angle of Outside Wheel Lock))+((Track Width of Vehicle-Distance between Front Wheel Pivot Center)/2)
R_or = (b/tan(φ))+((a_tw-c)/2)
This formula uses 1 Functions, 5 Variables

Functions Used

tan - The tangent of an angle is a trigonometric ratio of the length of the side opposite an angle to the length of the side adjacent to an angle in a right triangle., tan(Angle)

Variables Used

Turning Radius of Outer Rear Wheel - (Measured in Meter) - Turning Radius of Outer Rear Wheel while cornering is the radius of circle traced by outer rear wheel while cornering.
Wheelbase of Vehicle - (Measured in Meter) - Wheelbase of Vehicle is the center distance between the front and the rear axle of the vehicle.
Angle of Outside Wheel Lock - (Measured in Radian) - Angle of Outside Wheel Lock is the angle through which outer wheel of vehicle steers while cornering.
Track Width of Vehicle - (Measured in Meter) - Track Width of Vehicle is the distance between the center line of each of the two wheels on the same axle (front/rear axle).
Distance between Front Wheel Pivot Center - (Measured in Meter) - Distance between Front Wheel Pivot Center is the distance between those points about which both front wheels pivot while cornering.

STEP 1: Convert Input(s) to Base Unit

Wheelbase of Vehicle: 2700 Millimeter --> 2.7 Meter (Check conversion here)
Angle of Outside Wheel Lock: 30 Degree --> 0.5235987755982 Radian (Check conversion here)
Track Width of Vehicle: 1999 Millimeter --> 1.999 Meter (Check conversion here)
Distance between Front Wheel Pivot Center: 1300 Millimeter --> 1.3 Meter (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

R_or = (b/tan(φ))+((a_tw-c)/2) --> (2.7/tan(0.5235987755982))+((1.999-1.3)/2)

Evaluating ... ...

R_or = 5.02603718043597

STEP 3: Convert Result to Output's Unit

5.02603718043597 Meter -->5026.03718043597 Millimeter (Check conversion here)

FINAL ANSWER

5026.03718043597 ≈ 5026.037 Millimeter <-- Turning Radius of Outer Rear Wheel

(Calculation completed in 00.020 seconds)

You are here -

Home » Physics » Automobile » Front Axle and Steering » Mechanical » Turning Dynamics » Turning radius of outer rear wheel while cornering

Credits

Created by Vivek Gaikwad

AISSMS College of Engineering, Pune (AISSMSCOE, Pune), Pune

Vivek Gaikwad has created this Calculator and 25+ more calculators!

Verified by Aditya Prakash Gautam

Indian Institute of Technology (IIT (ISM) ), Dhanbad, Jharkhand

Aditya Prakash Gautam has verified this Calculator and 7 more calculators!

< Turning Dynamics Calculators

Pivot Centre given Turning Radius of Outer Front Wheel

LaTeX Go Distance between Front Wheel Pivot Center = Track Width of Vehicle-2*(-Wheelbase of Vehicle/sin(Angle of Outside Wheel Lock)+Turning Radius of Outer Front Wheel)

Pivot Centre given Turning Radius of Outer Rear Wheel

LaTeX Go Distance between Front Wheel Pivot Center = Track Width of Vehicle-2*(-Wheelbase of Vehicle/tan(Angle of Outside Wheel Lock)+Turning Radius of Outer Rear Wheel)

Pivot Centre given Turning Radius of Inner Front Wheel

LaTeX Go Distance between Front Wheel Pivot Center = Track Width of Vehicle-2*(Wheelbase of Vehicle/sin(Angle of Inside Wheel Lock)-Turning Radius of Inner Front Wheel)

Pivot Centre given Turning Radius of Inner Rear Wheel

LaTeX Go Distance between Front Wheel Pivot Center = Track Width of Vehicle-2*(Wheelbase of Vehicle/tan(Angle of Inside Wheel Lock)-Turning Radius of Inner Rear Wheel)

Turning radius of outer rear wheel while cornering Formula

LaTeX Go

Turning Radius of Outer Rear Wheel = (Wheelbase of Vehicle/tan(Angle of Outside Wheel Lock))+((Track Width of Vehicle-Distance between Front Wheel Pivot Center)/2)
R_or = (b/tan(φ))+((a_tw-c)/2)

Turning radius of outer rear wheel while cornering.

Turning radius of outer rear wheel while cornering is the radius of circle traced by outer rear wheel while cornering.

How to Calculate Turning radius of outer rear wheel while cornering?

Turning radius of outer rear wheel while cornering calculator uses Turning Radius of Outer Rear Wheel = (Wheelbase of Vehicle/tan(Angle of Outside Wheel Lock))+((Track Width of Vehicle-Distance between Front Wheel Pivot Center)/2) to calculate the Turning Radius of Outer Rear Wheel, The Turning radius of outer rear wheel while cornering is the radius of circle traced by outer rear wheel while cornering. Turning Radius of Outer Rear Wheel is denoted by R_or symbol.

How to calculate Turning radius of outer rear wheel while cornering using this online calculator? To use this online calculator for Turning radius of outer rear wheel while cornering, enter Wheelbase of Vehicle (b), Angle of Outside Wheel Lock (φ), Track Width of Vehicle (a_tw) & Distance between Front Wheel Pivot Center (c) and hit the calculate button. Here is how the Turning radius of outer rear wheel while cornering calculation can be explained with given input values -> 4.3E+6 = (2.7/tan(0.5235987755982))+((1.999-1.3)/2).

FAQ

What is Turning radius of outer rear wheel while cornering?

The Turning radius of outer rear wheel while cornering is the radius of circle traced by outer rear wheel while cornering and is represented as R_or = (b/tan(φ))+((a_tw-c)/2) or Turning Radius of Outer Rear Wheel = (Wheelbase of Vehicle/tan(Angle of Outside Wheel Lock))+((Track Width of Vehicle-Distance between Front Wheel Pivot Center)/2). Wheelbase of Vehicle is the center distance between the front and the rear axle of the vehicle, Angle of Outside Wheel Lock is the angle through which outer wheel of vehicle steers while cornering, Track Width of Vehicle is the distance between the center line of each of the two wheels on the same axle (front/rear axle) & Distance between Front Wheel Pivot Center is the distance between those points about which both front wheels pivot while cornering.

How to calculate Turning radius of outer rear wheel while cornering?

The Turning radius of outer rear wheel while cornering is the radius of circle traced by outer rear wheel while cornering is calculated using Turning Radius of Outer Rear Wheel = (Wheelbase of Vehicle/tan(Angle of Outside Wheel Lock))+((Track Width of Vehicle-Distance between Front Wheel Pivot Center)/2). To calculate Turning radius of outer rear wheel while cornering, you need Wheelbase of Vehicle (b), Angle of Outside Wheel Lock (φ), Track Width of Vehicle (a_tw) & Distance between Front Wheel Pivot Center (c). With our tool, you need to enter the respective value for Wheelbase of Vehicle, Angle of Outside Wheel Lock, Track Width of Vehicle & Distance between Front Wheel Pivot Center and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search