Tube Side Mass Flowrate of Liquid Given Number of Tubes and Fluid Velocity Calculator

✖Number of tubes in a heat exchanger refers to the count of individual tubes that form the heat transfer surface inside the heat exchanger.ⓘ Number of Tubes [N_Tubes]			+10% -10%
✖Fluid Density is defined as the ratio of mass of given fluid with respect to the volume that it occupies.ⓘ Fluid Density [ρ_fluid]			+10% -10%
✖Fluid Velocity is defined as the speed with which fluid flows inside a tube or pipe.ⓘ Fluid Velocity [V_f]			+10% -10%
✖Pipe inner diameter is the inner diameter where in the flow of fluid takes place. Pipe thickness is not taken into account.ⓘ Pipe Inner Diameter [D_inner]			+10% -10%

✖Mass Flowrate is the mass of a substance that passes per unit of time.ⓘ Tube Side Mass Flowrate of Liquid Given Number of Tubes and Fluid Velocity [M_flow]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Heat Exchangers Formula PDF PDF Image

Tube Side Mass Flowrate of Liquid Given Number of Tubes and Fluid Velocity Solution

STEP 0: Pre-Calculation Summary

Formula Used

Mass Flowrate = (Number of Tubes*Fluid Density*Fluid Velocity*pi*(Pipe Inner Diameter)^2)/4
M_flow = (N_Tubes*ρ_fluid*V_f*pi*(D_inner)^2)/4
This formula uses 1 Constants, 5 Variables

Constants Used

pi - Archimedes' constant Value Taken As 3.14159265358979323846264338327950288

Variables Used

Mass Flowrate - (Measured in Kilogram per Second) - Mass Flowrate is the mass of a substance that passes per unit of time.
Number of Tubes - Number of tubes in a heat exchanger refers to the count of individual tubes that form the heat transfer surface inside the heat exchanger.
Fluid Density - (Measured in Kilogram per Cubic Meter) - Fluid Density is defined as the ratio of mass of given fluid with respect to the volume that it occupies.
Fluid Velocity - (Measured in Meter per Second) - Fluid Velocity is defined as the speed with which fluid flows inside a tube or pipe.
Pipe Inner Diameter - (Measured in Meter) - Pipe inner diameter is the inner diameter where in the flow of fluid takes place. Pipe thickness is not taken into account.

STEP 1: Convert Input(s) to Base Unit

Number of Tubes: 55 --> No Conversion Required
Fluid Density: 995 Kilogram per Cubic Meter --> 995 Kilogram per Cubic Meter No Conversion Required
Fluid Velocity: 2.5 Meter per Second --> 2.5 Meter per Second No Conversion Required
Pipe Inner Diameter: 11.5 Millimeter --> 0.0115 Meter (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

M_flow = (N_Tubes*ρ_fluid*V_f*pi*(D_inner)^2)/4 --> (55*995*2.5*pi*(0.0115)^2)/4

Evaluating ... ...

M_flow = 14.2105648538928

STEP 3: Convert Result to Output's Unit

14.2105648538928 Kilogram per Second --> No Conversion Required

FINAL ANSWER

14.2105648538928 ≈ 14.21056 Kilogram per Second <-- Mass Flowrate

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Chemical Engineering » Process Equipment Design » Heat Exchangers » Basic Formulas of Heat Exchanger Designs » Tube Side Mass Flowrate of Liquid Given Number of Tubes and Fluid Velocity

Credits

Created by Rishi Vadodaria

Malviya National Institute Of Technology (MNIT JAIPUR ), JAIPUR

Rishi Vadodaria has created this Calculator and 200+ more calculators!

Verified by Vaibhav Mishra

DJ Sanghvi College of Engineering (DJSCE), Mumbai

Vaibhav Mishra has verified this Calculator and 200+ more calculators!

< Basic Formulas of Heat Exchanger Designs Calculators

Equivalent Diameter for Triangular Pitch in Heat Exchanger

LaTeX Go Equivalent Diameter = (1.10/Pipe Outer Diameter)*((Tube Pitch^2)-0.917*(Pipe Outer Diameter^2))

Equivalent Diameter for Square Pitch in Heat Exchanger

LaTeX Go Equivalent Diameter = (1.27/Pipe Outer Diameter)*((Tube Pitch^2)-0.785*(Pipe Outer Diameter^2))

Number of Tubes in Center Row Given Bundle Diameter and Tube Pitch

LaTeX Go Number of Tubes in Vertical Tube Row = Bundle Diameter/Tube Pitch

Number of Baffles in Shell and Tube Heat Exchanger

LaTeX Go Number of Baffles = (Length of Tube/Baffle Spacing)-1

Tube Side Mass Flowrate of Liquid Given Number of Tubes and Fluid Velocity Formula

LaTeX Go

Mass Flowrate = (Number of Tubes*Fluid Density*Fluid Velocity*pi*(Pipe Inner Diameter)^2)/4
M_flow = (N_Tubes*ρ_fluid*V_f*pi*(D_inner)^2)/4

What is Significance of Number of Tubes in Heat Exchanger?

The number of tubes in a heat exchanger is a critical design parameter that significantly impacts the performance and characteristics of the heat exchanger. The number of tubes directly influences the total heat transfer area of the heat exchanger. More tubes mean a larger surface area for heat exchange between the hot and cold fluids. This leads to improved heat transfer efficiency and better overall performance.

What is Shell and Tube heat exchanger?

A Shell and Tube Heat Exchanger is a common type of heat exchanger used in various industrial applications to transfer heat between two fluids. It consists of a large, cylindrical outer shell (usually made of metal) with multiple smaller tubes (also made of metal) running through it. The tubes are arranged in a bundle inside the shell and are typically oriented parallel to the shell's longitudinal axis.

How to Calculate Tube Side Mass Flowrate of Liquid Given Number of Tubes and Fluid Velocity?

Tube Side Mass Flowrate of Liquid Given Number of Tubes and Fluid Velocity calculator uses Mass Flowrate = (Number of Tubes*Fluid Density*Fluid Velocity*pi*(Pipe Inner Diameter)^2)/4 to calculate the Mass Flowrate, The Tube Side Mass Flowrate Of Liquid Given Number of Tubes and Fluid Velocity formula is defined as mass flowrate of the fluid allocated on the tube side in a shell and tube heat exchanger. Mass Flowrate is denoted by M_flow symbol.

How to calculate Tube Side Mass Flowrate of Liquid Given Number of Tubes and Fluid Velocity using this online calculator? To use this online calculator for Tube Side Mass Flowrate of Liquid Given Number of Tubes and Fluid Velocity, enter Number of Tubes (N_Tubes), Fluid Density (ρ_fluid), Fluid Velocity (V_f) & Pipe Inner Diameter (D_inner) and hit the calculate button. Here is how the Tube Side Mass Flowrate of Liquid Given Number of Tubes and Fluid Velocity calculation can be explained with given input values -> 14.21056 = (55*995*2.5*pi*(0.0115)^2)/4.

FAQ

What is Tube Side Mass Flowrate of Liquid Given Number of Tubes and Fluid Velocity?

The Tube Side Mass Flowrate Of Liquid Given Number of Tubes and Fluid Velocity formula is defined as mass flowrate of the fluid allocated on the tube side in a shell and tube heat exchanger and is represented as M_flow = (N_Tubes*ρ_fluid*V_f*pi*(D_inner)^2)/4 or Mass Flowrate = (Number of Tubes*Fluid Density*Fluid Velocity*pi*(Pipe Inner Diameter)^2)/4. Number of tubes in a heat exchanger refers to the count of individual tubes that form the heat transfer surface inside the heat exchanger, Fluid Density is defined as the ratio of mass of given fluid with respect to the volume that it occupies, Fluid Velocity is defined as the speed with which fluid flows inside a tube or pipe & Pipe inner diameter is the inner diameter where in the flow of fluid takes place. Pipe thickness is not taken into account.

How to calculate Tube Side Mass Flowrate of Liquid Given Number of Tubes and Fluid Velocity?

The Tube Side Mass Flowrate Of Liquid Given Number of Tubes and Fluid Velocity formula is defined as mass flowrate of the fluid allocated on the tube side in a shell and tube heat exchanger is calculated using Mass Flowrate = (Number of Tubes*Fluid Density*Fluid Velocity*pi*(Pipe Inner Diameter)^2)/4. To calculate Tube Side Mass Flowrate of Liquid Given Number of Tubes and Fluid Velocity, you need Number of Tubes (N_Tubes), Fluid Density (ρ_fluid), Fluid Velocity (V_f) & Pipe Inner Diameter (D_inner). With our tool, you need to enter the respective value for Number of Tubes, Fluid Density, Fluid Velocity & Pipe Inner Diameter and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Mass Flowrate?

In this formula, Mass Flowrate uses Number of Tubes, Fluid Density, Fluid Velocity & Pipe Inner Diameter. We can use 1 other way(s) to calculate the same, which is/are as follows -

Mass Flowrate = (Pumping Power*Fluid Density)/Tube Side Pressure Drop

Home

FREE PDFs

🔍 Search