Transverse Shrinkage in T-Joint with Two Fillets Calculator

✖Length of Fillet Leg in T Joint is the length of corner of a joint made of two pieces placed at approximately 90 degrees to each other.ⓘ Length of Fillet Leg in T Joint [h_t]			+10% -10%
✖Thickness of Bottom Plate is the thickness of the plate that is being welded and placed flat on ground.ⓘ Thickness of Bottom Plate [t_b]			+10% -10%

✖Transverse Shrinkage is a shrinkage of the metal result of contraction of the base metal.ⓘ Transverse Shrinkage in T-Joint with Two Fillets [s]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Distortion in Weldments Formulas PDF PDF Image

Transverse Shrinkage in T-Joint with Two Fillets Solution

STEP 0: Pre-Calculation Summary

Formula Used

Transverse Shrinkage = (1.02*Length of Fillet Leg in T Joint)/Thickness of Bottom Plate
s = (1.02*h_t)/t_b
This formula uses 3 Variables

Variables Used

Transverse Shrinkage - (Measured in Meter) - Transverse Shrinkage is a shrinkage of the metal result of contraction of the base metal.
Length of Fillet Leg in T Joint - (Measured in Meter) - Length of Fillet Leg in T Joint is the length of corner of a joint made of two pieces placed at approximately 90 degrees to each other.
Thickness of Bottom Plate - (Measured in Meter) - Thickness of Bottom Plate is the thickness of the plate that is being welded and placed flat on ground.

STEP 1: Convert Input(s) to Base Unit

Length of Fillet Leg in T Joint: 0.01 Millimeter --> 1E-05 Meter (Check conversion here)
Thickness of Bottom Plate: 3 Millimeter --> 0.003 Meter (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

s = (1.02*h_t)/t_b --> (1.02*1E-05)/0.003

Evaluating ... ...

s = 0.0034

STEP 3: Convert Result to Output's Unit

0.0034 Meter -->3.4 Millimeter (Check conversion here)

FINAL ANSWER

3.4 Millimeter <-- Transverse Shrinkage

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Production Engineering » Welding » Distortion in Weldments » Transverse Shrinkage in Joints » T Joint with Two Fillets » Transverse Shrinkage in T-Joint with Two Fillets

Credits

Created by Rajat Vishwakarma

University Institute of Technology RGPV (UIT - RGPV), Bhopal

Rajat Vishwakarma has created this Calculator and 400+ more calculators!

Verified by Chilvera Bhanu Teja

Institute of Aeronautical Engineering (IARE), Hyderabad

Chilvera Bhanu Teja has verified this Calculator and 200+ more calculators!

< T Joint with Two Fillets Calculators

Length of Fillet Leg from Transverse Shrinkage in T-Joints

LaTeX Go Length of Fillet Leg in T Joint = (Transverse Shrinkage*Thickness of Bottom Plate)/1.02

Transverse Shrinkage in T-Joint with Two Fillets

LaTeX Go Transverse Shrinkage = (1.02*Length of Fillet Leg in T Joint)/Thickness of Bottom Plate

Thickness of Bottom Plate in T-Joints

LaTeX Go Thickness of Bottom Plate = (1.02*Length of Fillet Leg in T Joint)/Transverse Shrinkage

Transverse Shrinkage in T-Joint with Two Fillets Formula

LaTeX Go

Transverse Shrinkage = (1.02*Length of Fillet Leg in T Joint)/Thickness of Bottom Plate
s = (1.02*h_t)/t_b

What is called Distortion in welding terms ?

One of the major problems found with weldments is the distortion. Distortion is caused mainly because of the shrinkage that take place in weldments. The shrinkage taking place in a weldment depends upon the geometry and type of the weld. There are three types of distortions possible in weldments.

(a) Transverse shrinkage occurring perpendicular to the weld line.
(b) Longitudinal shrinkage occurring parallel to the weld line, which is very small of the order of about 0.1% of the weld length and hence can be neglected.
(c) Angular change as a rotation about the weld line.

How to Calculate Transverse Shrinkage in T-Joint with Two Fillets?

Transverse Shrinkage in T-Joint with Two Fillets calculator uses Transverse Shrinkage = (1.02*Length of Fillet Leg in T Joint)/Thickness of Bottom Plate to calculate the Transverse Shrinkage, The Transverse Shrinkage in T-Joint with Two Fillets formula is defined as the decrease in width of weld due to metal contraction. Transverse Shrinkage is denoted by s symbol.

How to calculate Transverse Shrinkage in T-Joint with Two Fillets using this online calculator? To use this online calculator for Transverse Shrinkage in T-Joint with Two Fillets, enter Length of Fillet Leg in T Joint (h_t) & Thickness of Bottom Plate (t_b) and hit the calculate button. Here is how the Transverse Shrinkage in T-Joint with Two Fillets calculation can be explained with given input values -> 3400 = (1.02*1E-05)/0.003.

FAQ

What is Transverse Shrinkage in T-Joint with Two Fillets?

The Transverse Shrinkage in T-Joint with Two Fillets formula is defined as the decrease in width of weld due to metal contraction and is represented as s = (1.02*h_t)/t_b or Transverse Shrinkage = (1.02*Length of Fillet Leg in T Joint)/Thickness of Bottom Plate. Length of Fillet Leg in T Joint is the length of corner of a joint made of two pieces placed at approximately 90 degrees to each other & Thickness of Bottom Plate is the thickness of the plate that is being welded and placed flat on ground.

How to calculate Transverse Shrinkage in T-Joint with Two Fillets?

The Transverse Shrinkage in T-Joint with Two Fillets formula is defined as the decrease in width of weld due to metal contraction is calculated using Transverse Shrinkage = (1.02*Length of Fillet Leg in T Joint)/Thickness of Bottom Plate. To calculate Transverse Shrinkage in T-Joint with Two Fillets, you need Length of Fillet Leg in T Joint (h_t) & Thickness of Bottom Plate (t_b). With our tool, you need to enter the respective value for Length of Fillet Leg in T Joint & Thickness of Bottom Plate and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search