Transverse Shrinkage in Lap Joint with Fillets Calculator

✖The length of fillet leg in welding is the distance from the root of the fillet weld to the toe, measured along the legs of the triangular cross-section.ⓘ Length of Fillet Leg [h]			+10% -10%
✖Plate Thickness in Lap Joint refers to the thickness of the overlapping plates that are welded together.ⓘ Plate Thickness in Lap Joint [p_tl]			+10% -10%

✖Transverse Shrinkage is a shrinkage of the metal result of contraction of the base metal.ⓘ Transverse Shrinkage in Lap Joint with Fillets [s]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Distortion in Weldments Formulas PDF PDF Image

Transverse Shrinkage in Lap Joint with Fillets Solution

STEP 0: Pre-Calculation Summary

Formula Used

Transverse Shrinkage = (1.52*Length of Fillet Leg)/Plate Thickness in Lap Joint
s = (1.52*h)/p_tl
This formula uses 3 Variables

Variables Used

Transverse Shrinkage - (Measured in Meter) - Transverse Shrinkage is a shrinkage of the metal result of contraction of the base metal.
Length of Fillet Leg - (Measured in Meter) - The length of fillet leg in welding is the distance from the root of the fillet weld to the toe, measured along the legs of the triangular cross-section.
Plate Thickness in Lap Joint - (Measured in Meter) - Plate Thickness in Lap Joint refers to the thickness of the overlapping plates that are welded together.

STEP 1: Convert Input(s) to Base Unit

Length of Fillet Leg: 2.39 Millimeter --> 0.00239 Meter (Check conversion here)
Plate Thickness in Lap Joint: 800.17 Millimeter --> 0.80017 Meter (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

s = (1.52*h)/p_tl --> (1.52*0.00239)/0.80017

Evaluating ... ...

s = 0.00454003524251097

STEP 3: Convert Result to Output's Unit

0.00454003524251097 Meter -->4.54003524251097 Millimeter (Check conversion here)

FINAL ANSWER

4.54003524251097 ≈ 4.540035 Millimeter <-- Transverse Shrinkage

(Calculation completed in 00.020 seconds)

You are here -

Home » Engineering » Production Engineering » Welding » Distortion in Weldments » Transverse Shrinkage in Joints » Lap Joint with Fillets » Transverse Shrinkage in Lap Joint with Fillets

Credits

Created by Rajat Vishwakarma

University Institute of Technology RGPV (UIT - RGPV), Bhopal

Rajat Vishwakarma has created this Calculator and 400+ more calculators!

Verified by Nishan Poojary

Shri Madhwa Vadiraja Institute of Technology and Management (SMVITM), Udupi

Nishan Poojary has verified this Calculator and 400+ more calculators!

< Lap Joint with Fillets Calculators

Length of Fillet Leg in Lap Joints from Shrinkage

LaTeX Go Length of Fillet Leg = (Transverse Shrinkage*Plate Thickness in Lap Joint)/1.52

Transverse Shrinkage in Lap Joint with Fillets

LaTeX Go Transverse Shrinkage = (1.52*Length of Fillet Leg)/Plate Thickness in Lap Joint

Thickness of Plates in Lap Joints

LaTeX Go Plate Thickness in Lap Joint = (1.52*Length of Fillet Leg)/Transverse Shrinkage

Transverse Shrinkage in Lap Joint with Fillets Formula

LaTeX Go

Transverse Shrinkage = (1.52*Length of Fillet Leg)/Plate Thickness in Lap Joint
s = (1.52*h)/p_tl

What is called Distortion in welding terms ?

One of the major problems found with weldments is the distortion. Distortion is caused mainly because of the shrinkage that take place in weldments. The shrinkage taking place in a weldment depends upon the geometry and type of the weld. There are three types of distortions possible in weldments.

(a) Transverse shrinkage occurring perpendicular to the weld line.
(b) Longitudinal shrinkage occurring parallel to the weld line, which is very small of the order of about 0.1% of the weld length and hence can be neglected.
(c) Angular change as a rotation about the weld line.

How to Calculate Transverse Shrinkage in Lap Joint with Fillets?

Transverse Shrinkage in Lap Joint with Fillets calculator uses Transverse Shrinkage = (1.52*Length of Fillet Leg)/Plate Thickness in Lap Joint to calculate the Transverse Shrinkage, The Transverse Shrinkage in Lap Joint with Fillets formula is defined as the reduction of dimensions of welded joint due to contraction of metal. Transverse Shrinkage is denoted by s symbol.

How to calculate Transverse Shrinkage in Lap Joint with Fillets using this online calculator? To use this online calculator for Transverse Shrinkage in Lap Joint with Fillets, enter Length of Fillet Leg (h) & Plate Thickness in Lap Joint (p_tl) and hit the calculate button. Here is how the Transverse Shrinkage in Lap Joint with Fillets calculation can be explained with given input values -> 4540.035 = (1.52*0.00239)/0.80017.

FAQ

What is Transverse Shrinkage in Lap Joint with Fillets?

The Transverse Shrinkage in Lap Joint with Fillets formula is defined as the reduction of dimensions of welded joint due to contraction of metal and is represented as s = (1.52*h)/p_tl or Transverse Shrinkage = (1.52*Length of Fillet Leg)/Plate Thickness in Lap Joint. The length of fillet leg in welding is the distance from the root of the fillet weld to the toe, measured along the legs of the triangular cross-section & Plate Thickness in Lap Joint refers to the thickness of the overlapping plates that are welded together.

How to calculate Transverse Shrinkage in Lap Joint with Fillets?

The Transverse Shrinkage in Lap Joint with Fillets formula is defined as the reduction of dimensions of welded joint due to contraction of metal is calculated using Transverse Shrinkage = (1.52*Length of Fillet Leg)/Plate Thickness in Lap Joint. To calculate Transverse Shrinkage in Lap Joint with Fillets, you need Length of Fillet Leg (h) & Plate Thickness in Lap Joint (p_tl). With our tool, you need to enter the respective value for Length of Fillet Leg & Plate Thickness in Lap Joint and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search