Transmitted Voltage using Incident and Reflected Voltage Calculator

✖The Incident Voltage on the transmission line is equal to half the generator voltage.ⓘ Incident Voltage [V_i]			+10% -10%
✖Reflected Voltage is the voltage that is reflected in the transmission line during transient condition.ⓘ Reflected Voltage [E_r]			+10% -10%

✖Transmitted Voltage is defined as the Voltage wave that is traveling through the Load of the Transmission line.ⓘ Transmitted Voltage using Incident and Reflected Voltage [V_t]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Transmission Lines Formula PDF PDF Image

Transmitted Voltage using Incident and Reflected Voltage Solution

STEP 0: Pre-Calculation Summary

Formula Used

Transmitted Voltage = Incident Voltage+Reflected Voltage
V_t = V_i+E_r
This formula uses 3 Variables

Variables Used

Transmitted Voltage - (Measured in Volt) - Transmitted Voltage is defined as the Voltage wave that is traveling through the Load of the Transmission line.
Incident Voltage - (Measured in Volt) - The Incident Voltage on the transmission line is equal to half the generator voltage.
Reflected Voltage - (Measured in Volt) - Reflected Voltage is the voltage that is reflected in the transmission line during transient condition.

STEP 1: Convert Input(s) to Base Unit

Incident Voltage: 6 Volt --> 6 Volt No Conversion Required
Reflected Voltage: 4.5 Volt --> 4.5 Volt No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

V_t = V_i+E_r --> 6+4.5

Evaluating ... ...

V_t = 10.5

STEP 3: Convert Result to Output's Unit

10.5 Volt --> No Conversion Required

FINAL ANSWER

10.5 Volt <-- Transmitted Voltage

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Electrical » Power System » Transmission Lines » Transient » Transmitted Voltage using Incident and Reflected Voltage

Credits

Created by Urvi Rathod

Vishwakarma Government Engineering College (VGEC), Ahmedabad

Urvi Rathod has created this Calculator and 1500+ more calculators!

Verified by Kethavath Srinath

Osmania University (OU), Hyderabad

Kethavath Srinath has verified this Calculator and 1200+ more calculators!

< Transient Calculators

Load Impedance using Reflected Coefficient of Current

LaTeX Go Load Impedance = Characteristic Impedance*(1-Reflection Coefficient of Current)/(Reflection Coefficient of Current-1)

Load Impedance using Reflected Coefficient of Voltage

LaTeX Go Load Impedance = Characteristic Impedance*(Reflection Coefficient of Voltage+1)/(1-Reflection Coefficient of Voltage)

Characteristic Impedance (Line SC)

LaTeX Go Characteristic Impedance = Incident Voltage/Incident Current

Incident Voltage using Transmitted Voltage (Load OC)

LaTeX Go Incident Voltage = Transmitted Voltage/2

Transmitted Voltage using Incident and Reflected Voltage Formula

LaTeX Go

Transmitted Voltage = Incident Voltage+Reflected Voltage
V_t = V_i+E_r

Define characteristic Impedance.

The characteristic impedance is defined as a uniform transmission line is the ratio of the amplitudes of voltage and current of a single wave propagating along the line.

How to Calculate Transmitted Voltage using Incident and Reflected Voltage?

Transmitted Voltage using Incident and Reflected Voltage calculator uses Transmitted Voltage = Incident Voltage+Reflected Voltage to calculate the Transmitted Voltage, The Transmitted Voltage using Incident and Reflected Voltage formula is defined as the Voltage wave that is traveling through the Load of the Transmission line. Transmitted Voltage is denoted by V_t symbol.

How to calculate Transmitted Voltage using Incident and Reflected Voltage using this online calculator? To use this online calculator for Transmitted Voltage using Incident and Reflected Voltage, enter Incident Voltage (V_i) & Reflected Voltage (E_r) and hit the calculate button. Here is how the Transmitted Voltage using Incident and Reflected Voltage calculation can be explained with given input values -> 10.5 = 6+4.5.

FAQ

What is Transmitted Voltage using Incident and Reflected Voltage?

The Transmitted Voltage using Incident and Reflected Voltage formula is defined as the Voltage wave that is traveling through the Load of the Transmission line and is represented as V_t = V_i+E_r or Transmitted Voltage = Incident Voltage+Reflected Voltage. The Incident Voltage on the transmission line is equal to half the generator voltage & Reflected Voltage is the voltage that is reflected in the transmission line during transient condition.

How to calculate Transmitted Voltage using Incident and Reflected Voltage?

The Transmitted Voltage using Incident and Reflected Voltage formula is defined as the Voltage wave that is traveling through the Load of the Transmission line is calculated using Transmitted Voltage = Incident Voltage+Reflected Voltage. To calculate Transmitted Voltage using Incident and Reflected Voltage, you need Incident Voltage (V_i) & Reflected Voltage (E_r). With our tool, you need to enter the respective value for Incident Voltage & Reflected Voltage and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search