Transmissivity given Storage Coefficient from Distance Drawdown Calculator

✖The Storage Coefficient is referred as volume of water released from storage per unit decline in hydraulic head in the aquifer, per unit area of the aquifer.ⓘ Storage Coefficient [S]			+10% -10%
✖The Distance from Pumping Well to Point Intersection is referred as the straight line which intersects the zero-drawdown line.ⓘ Distance from Pumping Well to Point Intersection [r_o]			+10% -10%
✖The Total Drawdown is referred as reduction in hydraulic head observed at a well in an aquifer, typically due to pumping a well as part of an aquifer test or well test.ⓘ Total Drawdown [s_t]			+10% -10%

✖Transmissivity is the rate at which groundwater flows horizontally through an aquifer or the degree to which a medium allows something, in particular electromagnetic radiation, to pass through it.ⓘ Transmissivity given Storage Coefficient from Distance Drawdown [T]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Distance Drawdown Analysis Formulas PDF PDF Image

Transmissivity given Storage Coefficient from Distance Drawdown Solution

STEP 0: Pre-Calculation Summary

Formula Used

Transmissivity = (Storage Coefficient*Distance from Pumping Well to Point Intersection^2)/(2.25*Total Drawdown)
T = (S*r_o^2)/(2.25*s_t)
This formula uses 4 Variables

Variables Used

Transmissivity - (Measured in Square Meter per Second) - Transmissivity is the rate at which groundwater flows horizontally through an aquifer or the degree to which a medium allows something, in particular electromagnetic radiation, to pass through it.
Storage Coefficient - The Storage Coefficient is referred as volume of water released from storage per unit decline in hydraulic head in the aquifer, per unit area of the aquifer.
Distance from Pumping Well to Point Intersection - (Measured in Meter) - The Distance from Pumping Well to Point Intersection is referred as the straight line which intersects the zero-drawdown line.
Total Drawdown - (Measured in Meter) - The Total Drawdown is referred as reduction in hydraulic head observed at a well in an aquifer, typically due to pumping a well as part of an aquifer test or well test.

STEP 1: Convert Input(s) to Base Unit

Storage Coefficient: 0.0545 --> No Conversion Required
Distance from Pumping Well to Point Intersection: 4 Meter --> 4 Meter No Conversion Required
Total Drawdown: 0.035 Meter --> 0.035 Meter No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

T = (S*r_o^2)/(2.25*s_t) --> (0.0545*4^2)/(2.25*0.035)

Evaluating ... ...

T = 11.0730158730159

STEP 3: Convert Result to Output's Unit

11.0730158730159 Square Meter per Second --> No Conversion Required

FINAL ANSWER

11.0730158730159 ≈ 11.07302 Square Meter per Second <-- Transmissivity

(Calculation completed in 00.007 seconds)

You are here -

Home » Engineering » Civil » Engineering Hydrology » Groundwater Hydrology » Distance Drawdown Analysis » Transmissivity given Storage Coefficient from Distance Drawdown

Credits

Created by Mithila Muthamma PA

Coorg Institute of Technology (CIT), Coorg

Mithila Muthamma PA has created this Calculator and 2000+ more calculators!

Verified by Chandana P Dev

NSS College of Engineering (NSSCE), Palakkad

Chandana P Dev has verified this Calculator and 1700+ more calculators!

< Distance Drawdown Analysis Calculators

Storage Coefficient from Distance-Drawdown Graphs

LaTeX Go Storage Coefficient = 2.25*Transmissivity*Total Drawdown/Distance from Pumping Well to Point Intersection^2

Drawdown across One Log Cycle from Distance Drawdown Graphs given Transmissivity

LaTeX Go Drawdown Across Log Cycle = 2.3*Pumping Rate/(Transmissivity*2*pi)

Transmissivity from Distance Drawdown Graphs

LaTeX Go Transmissivity = 2.3*Pumping Rate/(2*pi*Drawdown Across Log Cycle)

Pumping Rate from Distance Drawdown Graphs

LaTeX Go Pumping Rate = Transmissivity*2*pi*Drawdown Across Log Cycle/2.3

Transmissivity given Storage Coefficient from Distance Drawdown Formula

LaTeX Go

Transmissivity = (Storage Coefficient*Distance from Pumping Well to Point Intersection^2)/(2.25*Total Drawdown)
T = (S*r_o^2)/(2.25*s_t)

What is Transmissivity in hydrology?

Transmissivity describes the ability of the aquifer to transmit groundwater throughout its entire saturated thickness. Transmissivity is measured as the rate at which groundwater can flow through an aquifer section of unit width under a unit hydraulic gradient.

How to Calculate Transmissivity given Storage Coefficient from Distance Drawdown?

Transmissivity given Storage Coefficient from Distance Drawdown calculator uses Transmissivity = (Storage Coefficient*Distance from Pumping Well to Point Intersection^2)/(2.25*Total Drawdown) to calculate the Transmissivity, The Transmissivity given Storage Coefficient from Distance Drawdown formula is defined as the rate at which groundwater flows horizontally through an aquifer or the degree to which a medium allows something, in particular electromagnetic radiation, to pass through it. Transmissivity is denoted by T symbol.

How to calculate Transmissivity given Storage Coefficient from Distance Drawdown using this online calculator? To use this online calculator for Transmissivity given Storage Coefficient from Distance Drawdown, enter Storage Coefficient (S), Distance from Pumping Well to Point Intersection (r_o) & Total Drawdown (s_t) and hit the calculate button. Here is how the Transmissivity given Storage Coefficient from Distance Drawdown calculation can be explained with given input values -> 11.07302 = (0.0545*4^2)/(2.25*0.035).

FAQ

What is Transmissivity given Storage Coefficient from Distance Drawdown?

The Transmissivity given Storage Coefficient from Distance Drawdown formula is defined as the rate at which groundwater flows horizontally through an aquifer or the degree to which a medium allows something, in particular electromagnetic radiation, to pass through it and is represented as T = (S*r_o^2)/(2.25*s_t) or Transmissivity = (Storage Coefficient*Distance from Pumping Well to Point Intersection^2)/(2.25*Total Drawdown). The Storage Coefficient is referred as volume of water released from storage per unit decline in hydraulic head in the aquifer, per unit area of the aquifer, The Distance from Pumping Well to Point Intersection is referred as the straight line which intersects the zero-drawdown line & The Total Drawdown is referred as reduction in hydraulic head observed at a well in an aquifer, typically due to pumping a well as part of an aquifer test or well test.

How to calculate Transmissivity given Storage Coefficient from Distance Drawdown?

The Transmissivity given Storage Coefficient from Distance Drawdown formula is defined as the rate at which groundwater flows horizontally through an aquifer or the degree to which a medium allows something, in particular electromagnetic radiation, to pass through it is calculated using Transmissivity = (Storage Coefficient*Distance from Pumping Well to Point Intersection^2)/(2.25*Total Drawdown). To calculate Transmissivity given Storage Coefficient from Distance Drawdown, you need Storage Coefficient (S), Distance from Pumping Well to Point Intersection (r_o) & Total Drawdown (s_t). With our tool, you need to enter the respective value for Storage Coefficient, Distance from Pumping Well to Point Intersection & Total Drawdown and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Transmissivity?

In this formula, Transmissivity uses Storage Coefficient, Distance from Pumping Well to Point Intersection & Total Drawdown. We can use 2 other way(s) to calculate the same, which is/are as follows -

Transmissivity = 2.3*Pumping Rate/(2*pi*Drawdown Across Log Cycle)
Transmissivity = 70*Pumping Rate/Drawdown Across One Log Cycle

Home

FREE PDFs

🔍 Search