Transmissibility Ratio given Magnification Factor Calculator

✖Magnification Factor is the ratio of the amplitude of the vibrating body to the amplitude of the force causing the vibration.ⓘ Magnification Factor [D]			+10% -10%
✖Stiffness of Spring is the measure of a spring's resistance to deformation, indicating its ability to store energy when compressed or stretched.ⓘ Stiffness of Spring [k]			+10% -10%
✖Damping Coefficient is a measure of the rate at which the amplitude of oscillations decreases in a mechanical system due to energy loss.ⓘ Damping Coefficient [c]			+10% -10%
✖Angular Velocity is the rate of change of angular displacement of an object rotating around a fixed axis in mechanical vibrations.ⓘ Angular Velocity [ω]			+10% -10%

✖Transmissibility Ratio is the ratio of the response amplitude of a system to the excitation amplitude in mechanical vibration analysis.ⓘ Transmissibility Ratio given Magnification Factor [ε]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Vibration Isolation and Transmissibility Formulas PDF PDF Image

Transmissibility Ratio given Magnification Factor Solution

STEP 0: Pre-Calculation Summary

Formula Used

Transmissibility Ratio = (Magnification Factor*sqrt(Stiffness of Spring^2+(Damping Coefficient*Angular Velocity)^2))/Stiffness of Spring
ε = (D*sqrt(k^2+(c*ω)^2))/k
This formula uses 1 Functions, 5 Variables

Functions Used

sqrt - A square root function is a function that takes a non-negative number as an input and returns the square root of the given input number., sqrt(Number)

Variables Used

Transmissibility Ratio - Transmissibility Ratio is the ratio of the response amplitude of a system to the excitation amplitude in mechanical vibration analysis.
Magnification Factor - Magnification Factor is the ratio of the amplitude of the vibrating body to the amplitude of the force causing the vibration.
Stiffness of Spring - (Measured in Newton per Meter) - Stiffness of Spring is the measure of a spring's resistance to deformation, indicating its ability to store energy when compressed or stretched.
Damping Coefficient - (Measured in Newton Second per Meter) - Damping Coefficient is a measure of the rate at which the amplitude of oscillations decreases in a mechanical system due to energy loss.
Angular Velocity - (Measured in Radian per Second) - Angular Velocity is the rate of change of angular displacement of an object rotating around a fixed axis in mechanical vibrations.

STEP 1: Convert Input(s) to Base Unit

Magnification Factor: 19.2 --> No Conversion Required
Stiffness of Spring: 60000 Newton per Meter --> 60000 Newton per Meter No Conversion Required
Damping Coefficient: 9000.022 Newton Second per Meter --> 9000.022 Newton Second per Meter No Conversion Required
Angular Velocity: 0.200022 Radian per Second --> 0.200022 Radian per Second No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

ε = (D*sqrt(k^2+(c*ω)^2))/k --> (19.2*sqrt(60000^2+(9000.022*0.200022)^2))/60000

Evaluating ... ...

ε = 19.2086399991543

STEP 3: Convert Result to Output's Unit

19.2086399991543 --> No Conversion Required

FINAL ANSWER

19.2086399991543 ≈ 19.20864 <-- Transmissibility Ratio

(Calculation completed in 00.004 seconds)

You are here -

Home » Physics » Theory of Machine » Vibrations » Longitudinal and Transverse Vibrations » Mechanical » Vibration Isolation and Transmissibility » Transmissibility Ratio given Magnification Factor

Credits

Created by Anshika Arya

National Institute Of Technology (NIT), Hamirpur

Anshika Arya has created this Calculator and 2000+ more calculators!

Verified by Dipto Mandal

Indian Institute of Information Technology (IIIT), Guwahati

Dipto Mandal has verified this Calculator and 400+ more calculators!

< Vibration Isolation and Transmissibility Calculators

Maximum Displacement of Vibration using Force Transmitted

LaTeX Go Maximum Displacement = Force Transmitted/(sqrt(Stiffness of Spring^2+(Damping Coefficient*Angular Velocity)^2))

Stiffness of Spring using Force Transmitted

LaTeX Go Stiffness of Spring = sqrt((Force Transmitted/Maximum Displacement)^2-(Damping Coefficient*Angular Velocity)^2)

Damping Coefficient using Force Transmitted

LaTeX Go Damping Coefficient = (sqrt((Force Transmitted/Maximum Displacement)^2-Stiffness of Spring^2))/Angular Velocity

Force Transmitted

LaTeX Go Force Transmitted = Maximum Displacement*sqrt(Stiffness of Spring^2+(Damping Coefficient*Angular Velocity)^2)

< Forced Vibration Calculators

Applied Force given Transmissibility Ratio and Maximum Displacement of Vibration

LaTeX Go Applied Force = (Maximum Displacement*sqrt(Stiffness of Spring^2+(Damping Coefficient*Angular Velocity)^2))/Transmissibility Ratio

Angular Velocity of Vibration using Force Transmitted

LaTeX Go Angular Velocity = (sqrt((Force Transmitted/Maximum Displacement)^2-Stiffness of Spring^2))/Damping Coefficient

Damping Coefficient using Force Transmitted

LaTeX Go Damping Coefficient = (sqrt((Force Transmitted/Maximum Displacement)^2-Stiffness of Spring^2))/Angular Velocity

Applied Force given Transmissibility Ratio

LaTeX Go Applied Force = Force Transmitted/Transmissibility Ratio

Transmissibility Ratio given Magnification Factor Formula

LaTeX Go

Transmissibility Ratio = (Magnification Factor*sqrt(Stiffness of Spring^2+(Damping Coefficient*Angular Velocity)^2))/Stiffness of Spring
ε = (D*sqrt(k^2+(c*ω)^2))/k

What is meant by vibration isolation?

Vibration isolation is a commonly used technique for reducing or suppressing unwanted vibrations in structures and machines. With this technique, the device or system of interest is isolated from the source of vibration through insertion of a resilient member or isolator.

How to Calculate Transmissibility Ratio given Magnification Factor?

Transmissibility Ratio given Magnification Factor calculator uses Transmissibility Ratio = (Magnification Factor*sqrt(Stiffness of Spring^2+(Damping Coefficient*Angular Velocity)^2))/Stiffness of Spring to calculate the Transmissibility Ratio, Transmissibility Ratio given Magnification Factor formula is defined as a measure of the ratio of the amplitude of the force transmitted to the foundation to the amplitude of the force applied to the system, which is an essential parameter in mechanical vibrations to analyze the dynamic behavior of systems. Transmissibility Ratio is denoted by ε symbol.

How to calculate Transmissibility Ratio given Magnification Factor using this online calculator? To use this online calculator for Transmissibility Ratio given Magnification Factor, enter Magnification Factor (D), Stiffness of Spring (k), Damping Coefficient (c) & Angular Velocity (ω) and hit the calculate button. Here is how the Transmissibility Ratio given Magnification Factor calculation can be explained with given input values -> 19.19864 = (19.2*sqrt(60000^2+(9000.022*0.200022)^2))/60000.

FAQ

What is Transmissibility Ratio given Magnification Factor?

Transmissibility Ratio given Magnification Factor formula is defined as a measure of the ratio of the amplitude of the force transmitted to the foundation to the amplitude of the force applied to the system, which is an essential parameter in mechanical vibrations to analyze the dynamic behavior of systems and is represented as ε = (D*sqrt(k^2+(c*ω)^2))/k or Transmissibility Ratio = (Magnification Factor*sqrt(Stiffness of Spring^2+(Damping Coefficient*Angular Velocity)^2))/Stiffness of Spring. Magnification Factor is the ratio of the amplitude of the vibrating body to the amplitude of the force causing the vibration, Stiffness of Spring is the measure of a spring's resistance to deformation, indicating its ability to store energy when compressed or stretched, Damping Coefficient is a measure of the rate at which the amplitude of oscillations decreases in a mechanical system due to energy loss & Angular Velocity is the rate of change of angular displacement of an object rotating around a fixed axis in mechanical vibrations.

How to calculate Transmissibility Ratio given Magnification Factor?

Transmissibility Ratio given Magnification Factor formula is defined as a measure of the ratio of the amplitude of the force transmitted to the foundation to the amplitude of the force applied to the system, which is an essential parameter in mechanical vibrations to analyze the dynamic behavior of systems is calculated using Transmissibility Ratio = (Magnification Factor*sqrt(Stiffness of Spring^2+(Damping Coefficient*Angular Velocity)^2))/Stiffness of Spring. To calculate Transmissibility Ratio given Magnification Factor, you need Magnification Factor (D), Stiffness of Spring (k), Damping Coefficient (c) & Angular Velocity (ω). With our tool, you need to enter the respective value for Magnification Factor, Stiffness of Spring, Damping Coefficient & Angular Velocity and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Transmissibility Ratio?

In this formula, Transmissibility Ratio uses Magnification Factor, Stiffness of Spring, Damping Coefficient & Angular Velocity. We can use 3 other way(s) to calculate the same, which is/are as follows -

Transmissibility Ratio = Force Transmitted/Applied Force
Transmissibility Ratio = (Maximum Displacement*sqrt(Stiffness of Spring^2+(Damping Coefficient*Angular Velocity)^2))/Applied Force
Transmissibility Ratio = Magnification Factor*sqrt(1+((2*Damping Coefficient*Angular Velocity)/(Critical Damping Coefficient*Natural Circular Frequency))^2)

Home

FREE PDFs

🔍 Search