Transmitted Power using Load Current(Two-Wire One Conductor Earthed) Solution

STEP 0: Pre-Calculation Summary
Formula Used
Power Transmitted = Current Overhead DC*Maximum Voltage Overhead DC
P = I*Vm
This formula uses 3 Variables
Variables Used
Power Transmitted - (Measured in Watt) - Power Transmitted is defined as the product of current and voltage phasor in a overhead dc line at the receiving end.
Current Overhead DC - (Measured in Ampere) - Current Overhead DC is defined as the current flowing through the overhead ac supply wire.
Maximum Voltage Overhead DC - (Measured in Volt) - Maximum Voltage Overhead DC is defined as the peak amplitude of the AC voltage supplied to the line or wire.
STEP 1: Convert Input(s) to Base Unit
Current Overhead DC: 3.1 Ampere --> 3.1 Ampere No Conversion Required
Maximum Voltage Overhead DC: 60.26 Volt --> 60.26 Volt No Conversion Required
STEP 2: Evaluate Formula
Substituting Input Values in Formula
P = I*Vm --> 3.1*60.26
Evaluating ... ...
P = 186.806
STEP 3: Convert Result to Output's Unit
186.806 Watt --> No Conversion Required
FINAL ANSWER
186.806 Watt <-- Power Transmitted
(Calculation completed in 00.004 seconds)

Credits

Creator Image
Created by Urvi Rathod
Vishwakarma Government Engineering College (VGEC), Ahmedabad
Urvi Rathod has created this Calculator and 1500+ more calculators!
Verifier Image
Verified by Kethavath Srinath
Osmania University (OU), Hyderabad
Kethavath Srinath has verified this Calculator and 1200+ more calculators!

Power and Power Factor Calculators

Power Transmitted using K(Two-Wire One Conductor Earthed)
​ LaTeX ​ Go Power Transmitted = sqrt(Constant Overhead DC*Line Losses*(Maximum Voltage Overhead DC^2)/(4*Resistivity*(Length of Wire DC^2)))
Transmitted Power using Volume(Two-Wire One Conductor Earthed)
​ LaTeX ​ Go Power Transmitted = sqrt(Volume of Conductor*Line Losses*(Maximum Voltage Overhead DC^2)/(4*Resistivity*(Length of Wire DC^2)))
Transmitted Power using Line Losses(Two-Wire One Conductor Earthed)
​ LaTeX ​ Go Power Transmitted = sqrt((Line Losses*(Maximum Voltage Overhead DC^2))/(2*Resistance Overhead DC))
Transmitted Power using Load Current(Two-Wire One Conductor Earthed)
​ LaTeX ​ Go Power Transmitted = Current Overhead DC*Maximum Voltage Overhead DC

Transmitted Power using Load Current(Two-Wire One Conductor Earthed) Formula

​LaTeX ​Go
Power Transmitted = Current Overhead DC*Maximum Voltage Overhead DC
P = I*Vm

What is the two-wire one conductor earthed system?

The load is connected between the two wires. where a1 is the area of X-section of the conductor. It is a usual practice to make this system as the basis fo comparison with other systems.

How to Calculate Transmitted Power using Load Current(Two-Wire One Conductor Earthed)?

Transmitted Power using Load Current(Two-Wire One Conductor Earthed) calculator uses Power Transmitted = Current Overhead DC*Maximum Voltage Overhead DC to calculate the Power Transmitted, The Transmitted Power using Load Current(Two-Wire One Conductor Earthed) formula is defined as proportional to its effective range. The higher the transmit power, the farther a signal can travel, and the more obstructions it can effectively penetrate. Power Transmitted is denoted by P symbol.

How to calculate Transmitted Power using Load Current(Two-Wire One Conductor Earthed) using this online calculator? To use this online calculator for Transmitted Power using Load Current(Two-Wire One Conductor Earthed), enter Current Overhead DC (I) & Maximum Voltage Overhead DC (Vm) and hit the calculate button. Here is how the Transmitted Power using Load Current(Two-Wire One Conductor Earthed) calculation can be explained with given input values -> 186.806 = 3.1*60.26.

FAQ

What is Transmitted Power using Load Current(Two-Wire One Conductor Earthed)?
The Transmitted Power using Load Current(Two-Wire One Conductor Earthed) formula is defined as proportional to its effective range. The higher the transmit power, the farther a signal can travel, and the more obstructions it can effectively penetrate and is represented as P = I*Vm or Power Transmitted = Current Overhead DC*Maximum Voltage Overhead DC. Current Overhead DC is defined as the current flowing through the overhead ac supply wire & Maximum Voltage Overhead DC is defined as the peak amplitude of the AC voltage supplied to the line or wire.
How to calculate Transmitted Power using Load Current(Two-Wire One Conductor Earthed)?
The Transmitted Power using Load Current(Two-Wire One Conductor Earthed) formula is defined as proportional to its effective range. The higher the transmit power, the farther a signal can travel, and the more obstructions it can effectively penetrate is calculated using Power Transmitted = Current Overhead DC*Maximum Voltage Overhead DC. To calculate Transmitted Power using Load Current(Two-Wire One Conductor Earthed), you need Current Overhead DC (I) & Maximum Voltage Overhead DC (Vm). With our tool, you need to enter the respective value for Current Overhead DC & Maximum Voltage Overhead DC and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
How many ways are there to calculate Power Transmitted?
In this formula, Power Transmitted uses Current Overhead DC & Maximum Voltage Overhead DC. We can use 3 other way(s) to calculate the same, which is/are as follows -
  • Power Transmitted = sqrt((Line Losses*(Maximum Voltage Overhead DC^2))/(2*Resistance Overhead DC))
  • Power Transmitted = sqrt(Volume of Conductor*Line Losses*(Maximum Voltage Overhead DC^2)/(4*Resistivity*(Length of Wire DC^2)))
  • Power Transmitted = sqrt(Constant Overhead DC*Line Losses*(Maximum Voltage Overhead DC^2)/(4*Resistivity*(Length of Wire DC^2)))
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!