Transconductance of BJT at Intrinsic Gain Solution

STEP 0: Pre-Calculation Summary
Formula Used
Transconductance = Drain Current/Gate to Source Voltage
Gm = Id/Vgs
This formula uses 3 Variables
Variables Used
Transconductance - (Measured in Siemens) - Transconductance is the ratio of the change in current at the output terminal to the change in the voltage at the input terminal of an active device.
Drain Current - (Measured in Ampere) - Drain Current below threshold voltage is defined as the subthreshold current and varies exponentially with gate to source voltage.
Gate to Source Voltage - (Measured in Volt) - Gate to source voltage of transistor is the voltage that falls across the gate-source terminal of the transistor.
STEP 1: Convert Input(s) to Base Unit
Drain Current: 0.3 Milliampere --> 0.0003 Ampere (Check conversion ​here)
Gate to Source Voltage: 17 Volt --> 17 Volt No Conversion Required
STEP 2: Evaluate Formula
Substituting Input Values in Formula
Gm = Id/Vgs --> 0.0003/17
Evaluating ... ...
Gm = 1.76470588235294E-05
STEP 3: Convert Result to Output's Unit
1.76470588235294E-05 Siemens -->0.0176470588235294 Millisiemens (Check conversion ​here)
FINAL ANSWER
0.0176470588235294 0.017647 Millisiemens <-- Transconductance
(Calculation completed in 00.004 seconds)

Credits

Creator Image
Created by Payal Priya
Birsa Institute of Technology (BIT), Sindri
Payal Priya has created this Calculator and 600+ more calculators!
Verifier Image
Verified by Parminder Singh
Chandigarh University (CU), Punjab
Parminder Singh has verified this Calculator and 500+ more calculators!

Transconductance Calculators

Body Transconductance
​ LaTeX ​ Go Body Transconductance = Back-gate Transconductance Parameter*Transconductance
Transconductance of BJT at Intrinsic Gain
​ LaTeX ​ Go Transconductance = Drain Current/Gate to Source Voltage
Transconductance using Collector Current
​ LaTeX ​ Go Transconductance = Collector Current/Threshold Voltage
Short-Circuit Transconductance
​ LaTeX ​ Go Transconductance = Output Current/Input Voltage

Transconductance of BJT at Intrinsic Gain Formula

​LaTeX ​Go
Transconductance = Drain Current/Gate to Source Voltage
Gm = Id/Vgs

Which transistor has higher gain BJT or MOS and why?

BJT has more gain than MOSFET because MOSFET shows Quadratic I-V characteristics and BJT shows Exponential I-V characteristics and the change in exponential behavior is more as compared to Quadratic behavior.

How to Calculate Transconductance of BJT at Intrinsic Gain?

Transconductance of BJT at Intrinsic Gain calculator uses Transconductance = Drain Current/Gate to Source Voltage to calculate the Transconductance, The Transconductance of BJT at intrinsic gain formula is defined as ratio of change in current at output terminal to change in voltage at input terminal of active device. Transconductance is denoted by Gm symbol.

How to calculate Transconductance of BJT at Intrinsic Gain using this online calculator? To use this online calculator for Transconductance of BJT at Intrinsic Gain, enter Drain Current (Id) & Gate to Source Voltage (Vgs) and hit the calculate button. Here is how the Transconductance of BJT at Intrinsic Gain calculation can be explained with given input values -> 17.64706 = 0.0003/17.

FAQ

What is Transconductance of BJT at Intrinsic Gain?
The Transconductance of BJT at intrinsic gain formula is defined as ratio of change in current at output terminal to change in voltage at input terminal of active device and is represented as Gm = Id/Vgs or Transconductance = Drain Current/Gate to Source Voltage. Drain Current below threshold voltage is defined as the subthreshold current and varies exponentially with gate to source voltage & Gate to source voltage of transistor is the voltage that falls across the gate-source terminal of the transistor.
How to calculate Transconductance of BJT at Intrinsic Gain?
The Transconductance of BJT at intrinsic gain formula is defined as ratio of change in current at output terminal to change in voltage at input terminal of active device is calculated using Transconductance = Drain Current/Gate to Source Voltage. To calculate Transconductance of BJT at Intrinsic Gain, you need Drain Current (Id) & Gate to Source Voltage (Vgs). With our tool, you need to enter the respective value for Drain Current & Gate to Source Voltage and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
How many ways are there to calculate Transconductance?
In this formula, Transconductance uses Drain Current & Gate to Source Voltage. We can use 2 other way(s) to calculate the same, which is/are as follows -
  • Transconductance = Collector Current/Threshold Voltage
  • Transconductance = Output Current/Input Voltage
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!