Total Volume of Soil or Rock Sample given Porosity Calculator

✖Volume of Voids is the amount of space within a soil or rock mass that is not occupied by solid particles, but rather by air or water.ⓘ Volume of Voids [V_v]			+10% -10%
✖Volume Percent of Porosity is the ratio of the volume of voids (pores or spaces) in a material to the total volume of that material, expressed as a percentage.ⓘ Volume Percent of Porosity [η_v]			+10% -10%

✖Total Volume of Soil or Rock Sample is the combined volume of solids and pores which may contain volume of air or volume of water, or both.ⓘ Total Volume of Soil or Rock Sample given Porosity [V_t]

⎘ Copy

👎

Formula

✖

Total Volume of Soil or Rock Sample given Porosity

Formula

V t = (\frac{V v}{η v}) \cdot 100

Example

22.4 m³ = (\frac{5.6 m³}{25}) \cdot 100

Calculator

LaTeX

Reset

👍

Download Aquifer Analysis and Properties Formulas PDF PDF Image

Total Volume of Soil or Rock Sample given Porosity Solution

STEP 0: Pre-Calculation Summary

Formula Used

Total Volume of Soil or Rock Sample = (Volume of Voids/Volume Percent of Porosity)*100
V_t = (V_v/η_v)*100
This formula uses 3 Variables

Variables Used

Total Volume of Soil or Rock Sample - (Measured in Cubic Meter) - Total Volume of Soil or Rock Sample is the combined volume of solids and pores which may contain volume of air or volume of water, or both.
Volume of Voids - (Measured in Cubic Meter) - Volume of Voids is the amount of space within a soil or rock mass that is not occupied by solid particles, but rather by air or water.
Volume Percent of Porosity - Volume Percent of Porosity is the ratio of the volume of voids (pores or spaces) in a material to the total volume of that material, expressed as a percentage.

STEP 1: Convert Input(s) to Base Unit

Volume of Voids: 5.6 Cubic Meter --> 5.6 Cubic Meter No Conversion Required
Volume Percent of Porosity: 25 --> No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

V_t = (V_v/η_v)*100 --> (5.6/25)*100

Evaluating ... ...

V_t = 22.4

STEP 3: Convert Result to Output's Unit

22.4 Cubic Meter --> No Conversion Required

FINAL ANSWER

22.4 Cubic Meter <-- Total Volume of Soil or Rock Sample

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Civil » Engineering Hydrology » Groundwater Hydrology » Aquifer Analysis and Properties » Aquifer Properties » Porosity » Total Volume of Soil or Rock Sample given Porosity

Credits

Created by Mithila Muthamma PA

Coorg Institute of Technology (CIT), Coorg

Mithila Muthamma PA has created this Calculator and 2000+ more calculators!

Verified by Himanshi Sharma

Bhilai Institute of Technology (BIT), Raipur

Himanshi Sharma has verified this Calculator and 800+ more calculators!

< Porosity Calculators

Porosity

Go Porosity of Soil = (Total Volume of Soil or Rock Sample-Volume of Solids)/Total Volume of Soil or Rock Sample

Total Volume of Soil or Rock Sample given Porosity

Go Total Volume of Soil or Rock Sample = (Volume of Voids/Volume Percent of Porosity)*100

Volume of Solids given Porosity

Go Volume of Solids = (Total Volume of Soil or Rock Sample*(1-Porosity of Soil))

Porosity given Specific Yield and Specific Retention

Go Porosity of Soil = Specific Yield+Specific Retention

Total Volume of Soil or Rock Sample given Porosity Formula

Total Volume of Soil or Rock Sample = (Volume of Voids/Volume Percent of Porosity)*100
V_t = (V_v/η_v)*100

What is Porosity?

Porosity or void fraction is a measure of the void spaces in a material, and is a fraction of the volume of voids over the total volume, between 0 and 1, or as a percentage between 0% and 100%. Porosity could be used to determine the reservoir storage capacity.

How to Calculate Total Volume of Soil or Rock Sample given Porosity?

Total Volume of Soil or Rock Sample given Porosity calculator uses Total Volume of Soil or Rock Sample = (Volume of Voids/Volume Percent of Porosity)*100 to calculate the Total Volume of Soil or Rock Sample, The Total Volume of Soil or Rock Sample given Porosity formula is defined as the calculation of the overall volume of void spaces within a sample of soil or rock, which is directly related to its porosity. Porosity is a measure of the void spaces or pores in a material, expressed as a fraction or percentage of the total volume of the material. Total Volume of Soil or Rock Sample is denoted by V_t symbol.

How to calculate Total Volume of Soil or Rock Sample given Porosity using this online calculator? To use this online calculator for Total Volume of Soil or Rock Sample given Porosity, enter Volume of Voids (V_v) & Volume Percent of Porosity (η_v) and hit the calculate button. Here is how the Total Volume of Soil or Rock Sample given Porosity calculation can be explained with given input values -> 160 = (5.6/25)*100.

FAQ

What is Total Volume of Soil or Rock Sample given Porosity?

The Total Volume of Soil or Rock Sample given Porosity formula is defined as the calculation of the overall volume of void spaces within a sample of soil or rock, which is directly related to its porosity. Porosity is a measure of the void spaces or pores in a material, expressed as a fraction or percentage of the total volume of the material and is represented as V_t = (V_v/η_v)*100 or Total Volume of Soil or Rock Sample = (Volume of Voids/Volume Percent of Porosity)*100. Volume of Voids is the amount of space within a soil or rock mass that is not occupied by solid particles, but rather by air or water & Volume Percent of Porosity is the ratio of the volume of voids (pores or spaces) in a material to the total volume of that material, expressed as a percentage.

How to calculate Total Volume of Soil or Rock Sample given Porosity?

The Total Volume of Soil or Rock Sample given Porosity formula is defined as the calculation of the overall volume of void spaces within a sample of soil or rock, which is directly related to its porosity. Porosity is a measure of the void spaces or pores in a material, expressed as a fraction or percentage of the total volume of the material is calculated using Total Volume of Soil or Rock Sample = (Volume of Voids/Volume Percent of Porosity)*100. To calculate Total Volume of Soil or Rock Sample given Porosity, you need Volume of Voids (V_v) & Volume Percent of Porosity (η_v). With our tool, you need to enter the respective value for Volume of Voids & Volume Percent of Porosity and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search