Total Voltage Gain of CS Amplifier Solution

STEP 0: Pre-Calculation Summary
Formula Used
Voltage Gain = Load Voltage/Input Voltage
Av = VL/Vin
This formula uses 3 Variables
Variables Used
Voltage Gain - Voltage gain is defined as the ratio of the output voltage to the input voltage.
Load Voltage - (Measured in Volt) - Load voltage of a CS amplifier is typically in the range of 2-5 volts. This voltage is used to bias the transistors in the amplifier and ensure proper operation.
Input Voltage - (Measured in Volt) - Input voltage is the voltage supplied to the device.
STEP 1: Convert Input(s) to Base Unit
Load Voltage: 10.52 Volt --> 10.52 Volt No Conversion Required
Input Voltage: 2.5 Volt --> 2.5 Volt No Conversion Required
STEP 2: Evaluate Formula
Substituting Input Values in Formula
Av = VL/Vin --> 10.52/2.5
Evaluating ... ...
Av = 4.208
STEP 3: Convert Result to Output's Unit
4.208 --> No Conversion Required
FINAL ANSWER
4.208 <-- Voltage Gain
(Calculation completed in 00.020 seconds)

Credits

Creator Image
Created by Payal Priya
Birsa Institute of Technology (BIT), Sindri
Payal Priya has created this Calculator and 600+ more calculators!
Verifier Image
Verified by Anshika Arya
National Institute Of Technology (NIT), Hamirpur
Anshika Arya has verified this Calculator and 2500+ more calculators!

Common Source Amplifier Calculators

Overall Feedback Voltage Gain of Common-Source Amplifier
​ LaTeX ​ Go Feedback Voltage Gain = -MOSFET Primary Transconductance*(Input Resistance/(Input Resistance+Signal Resistance))*(1/Drain Resistance+1/Load Resistance+1/Finite Output Resistance)^-1
Open-Circuit Voltage Gain of CS Amplifier
​ LaTeX ​ Go Open Circuit Voltage Gain = Finite Output Resistance/(Finite Output Resistance+1/MOSFET Primary Transconductance)
Current Gain of Controlled Source Transistor
​ LaTeX ​ Go Current Gain = 1/(1+1/(MOSFET Primary Transconductance*Resistance between Drain and Ground))
Total Voltage Gain of CS Amplifier
​ LaTeX ​ Go Voltage Gain = Load Voltage/Input Voltage

Common Stage Amplifiers Gain Calculators

Overall Feedback Voltage Gain of Common-Collector Amplifier
​ LaTeX ​ Go Overall Voltage Gain = ((Collector Base Current Gain+1)*Load Resistance)/((Collector Base Current Gain+1)*Load Resistance+(Collector Base Current Gain+1)*Emitter Resistance+Signal Resistance)
Negative Voltage Gain from Base to Collector
​ LaTeX ​ Go Negative Voltage Gain = -Common Base Current Gain*(Collector Resistance/Emitter Resistance)
Common Base Current Gain
​ LaTeX ​ Go Common Base Current Gain = (Voltage Gain*Emitter Resistance/Collector Resistance)
Voltage Gain of Common-Base Amplifier
​ LaTeX ​ Go Voltage Gain = Collector Voltage/Emitter Voltage

Total Voltage Gain of CS Amplifier Formula

​LaTeX ​Go
Voltage Gain = Load Voltage/Input Voltage
Av = VL/Vin

What is a controlled current source?

A controlled or dependent current source on the other hand changes its available current depending upon the voltage across, or the current through, some other element connected to the circuit. A current source that depends on a current input is generally referred too as a Current Controlled Current Source or CCCS.

How to Calculate Total Voltage Gain of CS Amplifier?

Total Voltage Gain of CS Amplifier calculator uses Voltage Gain = Load Voltage/Input Voltage to calculate the Voltage Gain, The Total Voltage Gain of CS amplifier is the ratio of the output voltage to the input voltage, and it is typically defined as the ratio of the output voltage to the input voltage or as the ratio of the output current to the input current . Voltage Gain is denoted by Av symbol.

How to calculate Total Voltage Gain of CS Amplifier using this online calculator? To use this online calculator for Total Voltage Gain of CS Amplifier, enter Load Voltage (VL) & Input Voltage (Vin) and hit the calculate button. Here is how the Total Voltage Gain of CS Amplifier calculation can be explained with given input values -> 4.21 = 10.52/2.5.

FAQ

What is Total Voltage Gain of CS Amplifier?
The Total Voltage Gain of CS amplifier is the ratio of the output voltage to the input voltage, and it is typically defined as the ratio of the output voltage to the input voltage or as the ratio of the output current to the input current and is represented as Av = VL/Vin or Voltage Gain = Load Voltage/Input Voltage. Load voltage of a CS amplifier is typically in the range of 2-5 volts. This voltage is used to bias the transistors in the amplifier and ensure proper operation & Input voltage is the voltage supplied to the device.
How to calculate Total Voltage Gain of CS Amplifier?
The Total Voltage Gain of CS amplifier is the ratio of the output voltage to the input voltage, and it is typically defined as the ratio of the output voltage to the input voltage or as the ratio of the output current to the input current is calculated using Voltage Gain = Load Voltage/Input Voltage. To calculate Total Voltage Gain of CS Amplifier, you need Load Voltage (VL) & Input Voltage (Vin). With our tool, you need to enter the respective value for Load Voltage & Input Voltage and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
How many ways are there to calculate Voltage Gain?
In this formula, Voltage Gain uses Load Voltage & Input Voltage. We can use 1 other way(s) to calculate the same, which is/are as follows -
  • Voltage Gain = Collector Voltage/Emitter Voltage
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!