Total Surface Area of Paraboloid given Surface to Volume Ratio Calculator

✖Radius of Paraboloid is defined as the length of the straight line from the center to any point on the circumference of the circular face of the Paraboloid.ⓘ Radius of Paraboloid [r]			+10% -10%
✖Height of Paraboloid is the vertical distance from the centre of the circular face to the local extreme point of the Paraboloid.ⓘ Height of Paraboloid [h]			+10% -10%
✖Surface to Volume Ratio of Paraboloid is the numerical ratio of the total surface area of the Paraboloid to the volume of the Paraboloid.ⓘ Surface to Volume Ratio of Paraboloid [R_A/V]			+10% -10%

✖Total Surface Area of Paraboloid is the total quantity of two dimensional space enclosed on the entire surface of the Paraboloid.ⓘ Total Surface Area of Paraboloid given Surface to Volume Ratio [TSA]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Paraboloid Formula PDF PDF Image

Total Surface Area of Paraboloid given Surface to Volume Ratio Solution

STEP 0: Pre-Calculation Summary

Formula Used

Total Surface Area of Paraboloid = 1/2*pi*Radius of Paraboloid^2*Height of Paraboloid*Surface to Volume Ratio of Paraboloid
TSA = 1/2*pi*r^2*h*R_A/V
This formula uses 1 Constants, 4 Variables

Constants Used

pi - Archimedes' constant Value Taken As 3.14159265358979323846264338327950288

Variables Used

Total Surface Area of Paraboloid - (Measured in Square Meter) - Total Surface Area of Paraboloid is the total quantity of two dimensional space enclosed on the entire surface of the Paraboloid.
Radius of Paraboloid - (Measured in Meter) - Radius of Paraboloid is defined as the length of the straight line from the center to any point on the circumference of the circular face of the Paraboloid.
Height of Paraboloid - (Measured in Meter) - Height of Paraboloid is the vertical distance from the centre of the circular face to the local extreme point of the Paraboloid.
Surface to Volume Ratio of Paraboloid - (Measured in 1 per Meter) - Surface to Volume Ratio of Paraboloid is the numerical ratio of the total surface area of the Paraboloid to the volume of the Paraboloid.

STEP 1: Convert Input(s) to Base Unit

Radius of Paraboloid: 5 Meter --> 5 Meter No Conversion Required
Height of Paraboloid: 50 Meter --> 50 Meter No Conversion Required
Surface to Volume Ratio of Paraboloid: 0.6 1 per Meter --> 0.6 1 per Meter No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

TSA = 1/2*pi*r^2*h*R_A/V --> 1/2*pi*5^2*50*0.6

Evaluating ... ...

TSA = 1178.09724509617

STEP 3: Convert Result to Output's Unit

1178.09724509617 Square Meter --> No Conversion Required

FINAL ANSWER

1178.09724509617 ≈ 1178.097 Square Meter <-- Total Surface Area of Paraboloid

(Calculation completed in 00.004 seconds)

You are here -

Home » Math » Geometry » 3D Geometry » Paraboloid » Surface Area of Paraboloid » Total Surface Area of Paraboloid » Total Surface Area of Paraboloid given Surface to Volume Ratio

Credits

Created by Divanshi Jain

Netaji Subhash University of Technology, Delhi (NSUT Delhi), Dwarka

Divanshi Jain has created this Calculator and 300+ more calculators!

Verified by Dhruv Walia

Indian Institute of Technology, Indian School of Mines, DHANBAD (IIT ISM), Dhanbad, Jharkhand

Dhruv Walia has verified this Calculator and 400+ more calculators!

< Total Surface Area of Paraboloid Calculators

Total Surface Area of Paraboloid given Volume

LaTeX Go Total Surface Area of Paraboloid = ((pi*sqrt((2*Volume of Paraboloid)/(pi*Height of Paraboloid)))/(6*Height of Paraboloid^2)*(((2*Volume of Paraboloid)/(pi*Height of Paraboloid)+(2*Height of Paraboloid)^2)^(3/2)-(2*Volume of Paraboloid)/(pi*Height of Paraboloid)^(3/2)))+(pi*Radius of Paraboloid^2)

Total Surface Area of Paraboloid

LaTeX Go Total Surface Area of Paraboloid = ((pi*Radius of Paraboloid)/(6*Height of Paraboloid^2)*((Radius of Paraboloid^2+4*Height of Paraboloid^2)^(3/2)-Radius of Paraboloid^3))+pi*Radius of Paraboloid^2

Total Surface Area of Paraboloid given Surface to Volume Ratio

LaTeX Go Total Surface Area of Paraboloid = 1/2*pi*Radius of Paraboloid^2*Height of Paraboloid*Surface to Volume Ratio of Paraboloid

Total Surface Area of Paraboloid given Lateral Surface Area

LaTeX Go Total Surface Area of Paraboloid = Lateral Surface Area of Paraboloid+pi*Radius of Paraboloid^2

Total Surface Area of Paraboloid given Surface to Volume Ratio Formula

LaTeX Go

Total Surface Area of Paraboloid = 1/2*pi*Radius of Paraboloid^2*Height of Paraboloid*Surface to Volume Ratio of Paraboloid
TSA = 1/2*pi*r^2*h*R_A/V

What is Paraboloid?

In geometry, a Paraboloid is a quadric surface that has exactly one axis of symmetry and no center of symmetry. The term "paraboloid" is derived from parabola, which refers to a conic section that has a similar property of symmetry. Every plane section of a paraboloid by a plane parallel to the axis of symmetry is a parabola. The paraboloid is hyperbolic if every other plane section is either a hyperbola, or two crossing lines (in the case of a section by a tangent plane). The paraboloid is elliptic if every other nonempty plane section is either an ellipse, or a single point (in the case of a section by a tangent plane). A paraboloid is either elliptic or hyperbolic.

How to Calculate Total Surface Area of Paraboloid given Surface to Volume Ratio?

Total Surface Area of Paraboloid given Surface to Volume Ratio calculator uses Total Surface Area of Paraboloid = 1/2*pi*Radius of Paraboloid^2*Height of Paraboloid*Surface to Volume Ratio of Paraboloid to calculate the Total Surface Area of Paraboloid, The Total Surface Area of Paraboloid given Surface to Volume Ratio formula is defined as the total quantity of two dimensional space enclosed on the entire surface of the Paraboloid, calculated using surface to volume ratio of Paraboloid. Total Surface Area of Paraboloid is denoted by TSA symbol.

How to calculate Total Surface Area of Paraboloid given Surface to Volume Ratio using this online calculator? To use this online calculator for Total Surface Area of Paraboloid given Surface to Volume Ratio, enter Radius of Paraboloid (r), Height of Paraboloid (h) & Surface to Volume Ratio of Paraboloid (R_A/V) and hit the calculate button. Here is how the Total Surface Area of Paraboloid given Surface to Volume Ratio calculation can be explained with given input values -> 1178.097 = 1/2*pi*5^2*50*0.6.

FAQ

What is Total Surface Area of Paraboloid given Surface to Volume Ratio?

The Total Surface Area of Paraboloid given Surface to Volume Ratio formula is defined as the total quantity of two dimensional space enclosed on the entire surface of the Paraboloid, calculated using surface to volume ratio of Paraboloid and is represented as TSA = 1/2*pi*r^2*h*R_A/V or Total Surface Area of Paraboloid = 1/2*pi*Radius of Paraboloid^2*Height of Paraboloid*Surface to Volume Ratio of Paraboloid. Radius of Paraboloid is defined as the length of the straight line from the center to any point on the circumference of the circular face of the Paraboloid, Height of Paraboloid is the vertical distance from the centre of the circular face to the local extreme point of the Paraboloid & Surface to Volume Ratio of Paraboloid is the numerical ratio of the total surface area of the Paraboloid to the volume of the Paraboloid.

How to calculate Total Surface Area of Paraboloid given Surface to Volume Ratio?

The Total Surface Area of Paraboloid given Surface to Volume Ratio formula is defined as the total quantity of two dimensional space enclosed on the entire surface of the Paraboloid, calculated using surface to volume ratio of Paraboloid is calculated using Total Surface Area of Paraboloid = 1/2*pi*Radius of Paraboloid^2*Height of Paraboloid*Surface to Volume Ratio of Paraboloid. To calculate Total Surface Area of Paraboloid given Surface to Volume Ratio, you need Radius of Paraboloid (r), Height of Paraboloid (h) & Surface to Volume Ratio of Paraboloid (R_A/V). With our tool, you need to enter the respective value for Radius of Paraboloid, Height of Paraboloid & Surface to Volume Ratio of Paraboloid and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Total Surface Area of Paraboloid?

In this formula, Total Surface Area of Paraboloid uses Radius of Paraboloid, Height of Paraboloid & Surface to Volume Ratio of Paraboloid. We can use 3 other way(s) to calculate the same, which is/are as follows -

Total Surface Area of Paraboloid = Lateral Surface Area of Paraboloid+pi*Radius of Paraboloid^2
Total Surface Area of Paraboloid = ((pi*sqrt((2*Volume of Paraboloid)/(pi*Height of Paraboloid)))/(6*Height of Paraboloid^2)*(((2*Volume of Paraboloid)/(pi*Height of Paraboloid)+(2*Height of Paraboloid)^2)^(3/2)-(2*Volume of Paraboloid)/(pi*Height of Paraboloid)^(3/2)))+(pi*Radius of Paraboloid^2)
Total Surface Area of Paraboloid = ((pi*Radius of Paraboloid)/(6*Height of Paraboloid^2)*((Radius of Paraboloid^2+4*Height of Paraboloid^2)^(3/2)-Radius of Paraboloid^3))+pi*Radius of Paraboloid^2

Home

FREE PDFs

🔍 Search