Total Sag given Catenary Parameter for UDL on Catenary Parabolic Cable Calculator

✖Maximum Sag is the maximum catenary or the greatest amount of sag that can be allowed in the cable system.ⓘ Maximum Sag [d]			+10% -10%
✖Catenary Parameter is factor found when load in increased due to self weight.ⓘ Catenary Parameter [c]			+10% -10%

✖Sag of cable is vertical sag at midpoint of cable.ⓘ Total Sag given Catenary Parameter for UDL on Catenary Parabolic Cable [f_cable]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Cable System, Sag and Drainage on Bridges Formulas PDF PDF Image

Total Sag given Catenary Parameter for UDL on Catenary Parabolic Cable Solution

STEP 0: Pre-Calculation Summary

Formula Used

Sag of Cable = Maximum Sag+Catenary Parameter
f_cable = d+c
This formula uses 3 Variables

Variables Used

Sag of Cable - (Measured in Meter) - Sag of cable is vertical sag at midpoint of cable.
Maximum Sag - (Measured in Meter) - Maximum Sag is the maximum catenary or the greatest amount of sag that can be allowed in the cable system.
Catenary Parameter - (Measured in Meter) - Catenary Parameter is factor found when load in increased due to self weight.

STEP 1: Convert Input(s) to Base Unit

Maximum Sag: 1.44 Meter --> 1.44 Meter No Conversion Required
Catenary Parameter: 19.56 Meter --> 19.56 Meter No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

f_cable = d+c --> 1.44+19.56

Evaluating ... ...

f_cable = 21

STEP 3: Convert Result to Output's Unit

21 Meter --> No Conversion Required

FINAL ANSWER

21 Meter <-- Sag of Cable

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Civil » Bridge and Suspension Cable » Suspension Cables » Cable System, Sag and Drainage on Bridges » Catenary Cable Sag and Distance between Supports » Total Sag given Catenary Parameter for UDL on Catenary Parabolic Cable

Credits

Created by Rithik Agrawal

National Institute of Technology Karnataka (NITK), Surathkal

Rithik Agrawal has created this Calculator and 1300+ more calculators!

Verified by Mithila Muthamma PA

Coorg Institute of Technology (CIT), Coorg

Mithila Muthamma PA has verified this Calculator and 700+ more calculators!

< Catenary Cable Sag and Distance between Supports Calculators

Maximum Sag given Catenary Parameter for UDL on Catenary Parabolic Cable

LaTeX Go Maximum Sag = (-Catenary Parameter)+(Tension at Supports/Uniformly Distributed Load)

Tension at Supports given Catenary Parameter for UDL on Catenary Parabolic Cable

LaTeX Go Tension at Supports = (Maximum Sag+Catenary Parameter)*Uniformly Distributed Load

UDL given Catenary Parameter for UDL on Catenary Parabolic Cable

LaTeX Go Uniformly Distributed Load = Tension at Supports/(Maximum Sag+Catenary Parameter)

Catenary Parameter for UDL on Catenary Parabolic Cable

LaTeX Go Catenary Parameter = (Tension at Supports/Uniformly Distributed Load)-Maximum Sag

Total Sag given Catenary Parameter for UDL on Catenary Parabolic Cable Formula

LaTeX Go

Sag of Cable = Maximum Sag+Catenary Parameter
f_cable = d+c

What is Sag?

The vertical distance between the straight line joining the points of consecutive supports and the lowest point of the conductor is called sag. The tighter the wire, the smaller is the sag and vice-versa.

What is Catenary?

Catenary is the curve that an idealized hanging chain or cable assumes under its own weight when supported only at its ends. The catenary curve has a U-like shape, superficially similar in appearance to a parabolic arch, but it is not a parabola.

How to Calculate Total Sag given Catenary Parameter for UDL on Catenary Parabolic Cable?

Total Sag given Catenary Parameter for UDL on Catenary Parabolic Cable calculator uses Sag of Cable = Maximum Sag+Catenary Parameter to calculate the Sag of Cable, The Total Sag given Catenary Parameter for UDL on Catenary Parabolic Cable formula is defined as the total vertical deflection of cable at midpoint due to UDL. Sag of Cable is denoted by f_cable symbol.

How to calculate Total Sag given Catenary Parameter for UDL on Catenary Parabolic Cable using this online calculator? To use this online calculator for Total Sag given Catenary Parameter for UDL on Catenary Parabolic Cable, enter Maximum Sag (d) & Catenary Parameter (c) and hit the calculate button. Here is how the Total Sag given Catenary Parameter for UDL on Catenary Parabolic Cable calculation can be explained with given input values -> 21 = 1.44+19.56.

FAQ

What is Total Sag given Catenary Parameter for UDL on Catenary Parabolic Cable?

The Total Sag given Catenary Parameter for UDL on Catenary Parabolic Cable formula is defined as the total vertical deflection of cable at midpoint due to UDL and is represented as f_cable = d+c or Sag of Cable = Maximum Sag+Catenary Parameter. Maximum Sag is the maximum catenary or the greatest amount of sag that can be allowed in the cable system & Catenary Parameter is factor found when load in increased due to self weight.

How to calculate Total Sag given Catenary Parameter for UDL on Catenary Parabolic Cable?

The Total Sag given Catenary Parameter for UDL on Catenary Parabolic Cable formula is defined as the total vertical deflection of cable at midpoint due to UDL is calculated using Sag of Cable = Maximum Sag+Catenary Parameter. To calculate Total Sag given Catenary Parameter for UDL on Catenary Parabolic Cable, you need Maximum Sag (d) & Catenary Parameter (c). With our tool, you need to enter the respective value for Maximum Sag & Catenary Parameter and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search