Total Road Resistance given Rolling Resistance and Grade Resistance Calculator

✖Tire Penetration is the penetration depth of tire rubber into the road.ⓘ Tire Penetration [p]			+10% -10%
✖Percent Grade is a measure of the steepness or incline of a slope, expressed as a percentage.ⓘ Percent Grade [PG]			+10% -10%
✖Weight on Wheels is the weight of an equipment is resting on its wheels.ⓘ Weight on Wheels [W]			+10% -10%

✖Total Road Resistance is the sum of the resistance from all the wheels.ⓘ Total Road Resistance given Rolling Resistance and Grade Resistance [T]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Earth Moving Formulas PDF PDF Image

Total Road Resistance given Rolling Resistance and Grade Resistance Solution

STEP 0: Pre-Calculation Summary

Formula Used

Total Road Resistance = ((0.02+0.015*Tire Penetration+0.01*Percent Grade)*Weight on Wheels)
T = ((0.02+0.015*p+0.01*PG)*W)
This formula uses 4 Variables

Variables Used

Total Road Resistance - (Measured in Newton) - Total Road Resistance is the sum of the resistance from all the wheels.
Tire Penetration - (Measured in Meter) - Tire Penetration is the penetration depth of tire rubber into the road.
Percent Grade - Percent Grade is a measure of the steepness or incline of a slope, expressed as a percentage.
Weight on Wheels - (Measured in Kilogram) - Weight on Wheels is the weight of an equipment is resting on its wheels.

STEP 1: Convert Input(s) to Base Unit

Tire Penetration: 5 Meter --> 5 Meter No Conversion Required
Percent Grade: 4 --> No Conversion Required
Weight on Wheels: 20 Kilogram --> 20 Kilogram No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

T = ((0.02+0.015*p+0.01*PG)*W) --> ((0.02+0.015*5+0.01*4)*20)

Evaluating ... ...

T = 2.7

STEP 3: Convert Result to Output's Unit

2.7 Newton --> No Conversion Required

FINAL ANSWER

2.7 Newton <-- Total Road Resistance

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Civil » Geotechnical Engineering » Earth Moving » Total Road Resistance given Rolling Resistance and Grade Resistance

Credits

Created by Suraj Kumar

Birsa Institute of Technology (BIT), Sindri

Suraj Kumar has created this Calculator and 2100+ more calculators!

Verified by Ishita Goyal

Meerut Institute of Engineering and Technology (MIET), Meerut

Ishita Goyal has verified this Calculator and 2600+ more calculators!

< Earth Moving Calculators

Rolling Resistance to Motion of Wheeled Vehicles

LaTeX Go Rolling Resistance = (Rolling Resistance Factor*Weight on Wheels)+(Tire Penetration Factor*Tire Penetration*Weight on Wheels)

Weight on Wheels given Rolling Resistance

LaTeX Go Weight on Wheels = (Rolling Resistance/(Rolling Resistance Factor+Tire Penetration Factor*Tire Penetration))

Grade Resistance for Motion on Slope

LaTeX Go Grade Resistance = Grade Resistance Factor*Percent Grade*Weight on Wheels

Rolling Resistance when Rolling Resistance Factor is Two Percent

LaTeX Go Rolling Resistance (Rolling Resistance Factor 2%) = (0.02+0.015*Tire Penetration)*Weight on Wheels

Total Road Resistance given Rolling Resistance and Grade Resistance Formula

LaTeX Go

Total Road Resistance = ((0.02+0.015*Tire Penetration+0.01*Percent Grade)*Weight on Wheels)
T = ((0.02+0.015*p+0.01*PG)*W)

What is Total Road Resistance?

Considering the vehicle as a whole, the total rolling resistance is the sum of the resistance from all the wheels.The total road resistance is the algebraic sum of the rolling and grade resistances, or the total pull.

How to Calculate Total Road Resistance given Rolling Resistance and Grade Resistance?

Total Road Resistance given Rolling Resistance and Grade Resistance calculator uses Total Road Resistance = ((0.02+0.015*Tire Penetration+0.01*Percent Grade)*Weight on Wheels) to calculate the Total Road Resistance, The Total Road Resistance given Rolling Resistance and Grade Resistance formula is defined as the total resistance offered by rolling and grade both. Total Road Resistance is denoted by T symbol.

How to calculate Total Road Resistance given Rolling Resistance and Grade Resistance using this online calculator? To use this online calculator for Total Road Resistance given Rolling Resistance and Grade Resistance, enter Tire Penetration (p), Percent Grade (PG) & Weight on Wheels (W) and hit the calculate button. Here is how the Total Road Resistance given Rolling Resistance and Grade Resistance calculation can be explained with given input values -> 2.7 = ((0.02+0.015*5+0.01*4)*20).

FAQ

What is Total Road Resistance given Rolling Resistance and Grade Resistance?

The Total Road Resistance given Rolling Resistance and Grade Resistance formula is defined as the total resistance offered by rolling and grade both and is represented as T = ((0.02+0.015*p+0.01*PG)*W) or Total Road Resistance = ((0.02+0.015*Tire Penetration+0.01*Percent Grade)*Weight on Wheels). Tire Penetration is the penetration depth of tire rubber into the road, Percent Grade is a measure of the steepness or incline of a slope, expressed as a percentage & Weight on Wheels is the weight of an equipment is resting on its wheels.

How to calculate Total Road Resistance given Rolling Resistance and Grade Resistance?

The Total Road Resistance given Rolling Resistance and Grade Resistance formula is defined as the total resistance offered by rolling and grade both is calculated using Total Road Resistance = ((0.02+0.015*Tire Penetration+0.01*Percent Grade)*Weight on Wheels). To calculate Total Road Resistance given Rolling Resistance and Grade Resistance, you need Tire Penetration (p), Percent Grade (PG) & Weight on Wheels (W). With our tool, you need to enter the respective value for Tire Penetration, Percent Grade & Weight on Wheels and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search