Total Projected Area of Bearing Pad in Terms of Load acting on Bearing Calculator

✖The Load Acting on Sliding Bearing is the force exerted on a sliding bearing surface, crucial for assessing bearing performance and ensuring proper mechanical function.ⓘ Load Acting on Sliding Bearing [W]			+10% -10%
✖The Pressure of Lubricating Oil is the force exerted by the oil within a bearing, essential for reducing friction and ensuring smooth operation in mechanical systems.ⓘ Pressure of Lubricating Oil [p_r]			+10% -10%
✖The Load Coefficient for Bearing is a measure of the load-carrying capacity of a bearing, indicating its performance under specific operating conditions.ⓘ Load Coefficient for Bearing [a_f]			+10% -10%

✖The Total Projected Area of Bearing Pad is the surface area of the bearing pad that is in contact with the load, influencing load distribution and performance.ⓘ Total Projected Area of Bearing Pad in Terms of Load acting on Bearing [A_p]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Hydrostatic Step Bearing with Pad Formulas PDF PDF Image

Total Projected Area of Bearing Pad in Terms of Load acting on Bearing Solution

STEP 0: Pre-Calculation Summary

Formula Used

Total Projected Area of Bearing Pad = Load Acting on Sliding Bearing/(Pressure of Lubricating Oil*Load Coefficient for Bearing)
A_p = W/(p_r*a_f)
This formula uses 4 Variables

Variables Used

Total Projected Area of Bearing Pad - (Measured in Square Meter) - The Total Projected Area of Bearing Pad is the surface area of the bearing pad that is in contact with the load, influencing load distribution and performance.
Load Acting on Sliding Bearing - (Measured in Newton) - The Load Acting on Sliding Bearing is the force exerted on a sliding bearing surface, crucial for assessing bearing performance and ensuring proper mechanical function.
Pressure of Lubricating Oil - (Measured in Pascal) - The Pressure of Lubricating Oil is the force exerted by the oil within a bearing, essential for reducing friction and ensuring smooth operation in mechanical systems.
Load Coefficient for Bearing - The Load Coefficient for Bearing is a measure of the load-carrying capacity of a bearing, indicating its performance under specific operating conditions.

STEP 1: Convert Input(s) to Base Unit

Load Acting on Sliding Bearing: 1800 Newton --> 1800 Newton No Conversion Required
Pressure of Lubricating Oil: 4.3 Megapascal --> 4300000 Pascal (Check conversion here)
Load Coefficient for Bearing: 0.93 --> No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

A_p = W/(p_r*a_f) --> 1800/(4300000*0.93)

Evaluating ... ...

A_p = 0.000450112528132033

STEP 3: Convert Result to Output's Unit

0.000450112528132033 Square Meter -->450.112528132033 Square Millimeter (Check conversion here)

FINAL ANSWER

450.112528132033 ≈ 450.1125 Square Millimeter <-- Total Projected Area of Bearing Pad

(Calculation completed in 00.020 seconds)

You are here -

Home » Engineering » Mechanical » Machine Design » Design of Sliding Contact Bearing » Hydrostatic Step Bearing with Pad » Total Projected Area of Bearing Pad in Terms of Load acting on Bearing

Credits

Created by Vaibhav Malani

National Institute of Technology (NIT), Tiruchirapalli

Vaibhav Malani has created this Calculator and 600+ more calculators!

Verified by Anshika Arya

National Institute Of Technology (NIT), Hamirpur

Anshika Arya has verified this Calculator and 2500+ more calculators!

< Hydrostatic Step Bearing with Pad Calculators

Length of Slot in Direction of Flow in Terms of Flow of Lubricant

LaTeX Go Length of Slot in Direction of Flow = Pressure Difference between Slot Sides*Breadth of Slot for Oil Flow*(Oil Film thickness^3)/(12*Dynamic Viscosity of Lubricant*Flow of Lubricant from Slot)

Flow of Lubricant through slot in Terms of Pressure Difference

LaTeX Go Flow of Lubricant from Slot = Pressure Difference between Slot Sides*Breadth of Slot for Oil Flow*(Oil Film thickness^3)/(12*Dynamic Viscosity of Lubricant*Length of Slot in Direction of Flow)

Dimension b of Slot given Flow of Lubricant

LaTeX Go Breadth of Slot for Oil Flow = Length of Slot in Direction of Flow*12*Dynamic Viscosity of Lubricant*Flow of Lubricant from Slot/((Oil Film thickness^3)*Pressure Difference between Slot Sides)

Total Projected Area of Bearing Pad

LaTeX Go Total Projected Area of Bearing Pad = Dimension X of Bearing Pad*Dimension Y of Bearing Pad

Total Projected Area of Bearing Pad in Terms of Load acting on Bearing Formula

LaTeX Go

Total Projected Area of Bearing Pad = Load Acting on Sliding Bearing/(Pressure of Lubricating Oil*Load Coefficient for Bearing)
A_p = W/(p_r*a_f)

What is Sliding Contact Bearing?

The sliding contact bearings in which the sliding action is along the circumference of a circle or an arc of a circle and carrying radial loads are known as journal or sleeve bearings.

How to Calculate Total Projected Area of Bearing Pad in Terms of Load acting on Bearing?

Total Projected Area of Bearing Pad in Terms of Load acting on Bearing calculator uses Total Projected Area of Bearing Pad = Load Acting on Sliding Bearing/(Pressure of Lubricating Oil*Load Coefficient for Bearing) to calculate the Total Projected Area of Bearing Pad, Total Projected Area of Bearing Pad in Terms of Load acting on Bearing formula is defined as a method to determine the effective area of a bearing pad that supports a load. This area is crucial for ensuring proper load distribution and minimizing wear in mechanical systems. Total Projected Area of Bearing Pad is denoted by A_p symbol.

How to calculate Total Projected Area of Bearing Pad in Terms of Load acting on Bearing using this online calculator? To use this online calculator for Total Projected Area of Bearing Pad in Terms of Load acting on Bearing, enter Load Acting on Sliding Bearing (W), Pressure of Lubricating Oil (p_r) & Load Coefficient for Bearing (a_f) and hit the calculate button. Here is how the Total Projected Area of Bearing Pad in Terms of Load acting on Bearing calculation can be explained with given input values -> 4.5E+8 = 1800/(4300000*0.93).

FAQ

What is Total Projected Area of Bearing Pad in Terms of Load acting on Bearing?

Total Projected Area of Bearing Pad in Terms of Load acting on Bearing formula is defined as a method to determine the effective area of a bearing pad that supports a load. This area is crucial for ensuring proper load distribution and minimizing wear in mechanical systems and is represented as A_p = W/(p_r*a_f) or Total Projected Area of Bearing Pad = Load Acting on Sliding Bearing/(Pressure of Lubricating Oil*Load Coefficient for Bearing). The Load Acting on Sliding Bearing is the force exerted on a sliding bearing surface, crucial for assessing bearing performance and ensuring proper mechanical function, The Pressure of Lubricating Oil is the force exerted by the oil within a bearing, essential for reducing friction and ensuring smooth operation in mechanical systems & The Load Coefficient for Bearing is a measure of the load-carrying capacity of a bearing, indicating its performance under specific operating conditions.

How to calculate Total Projected Area of Bearing Pad in Terms of Load acting on Bearing?

Total Projected Area of Bearing Pad in Terms of Load acting on Bearing formula is defined as a method to determine the effective area of a bearing pad that supports a load. This area is crucial for ensuring proper load distribution and minimizing wear in mechanical systems is calculated using Total Projected Area of Bearing Pad = Load Acting on Sliding Bearing/(Pressure of Lubricating Oil*Load Coefficient for Bearing). To calculate Total Projected Area of Bearing Pad in Terms of Load acting on Bearing, you need Load Acting on Sliding Bearing (W), Pressure of Lubricating Oil (p_r) & Load Coefficient for Bearing (a_f). With our tool, you need to enter the respective value for Load Acting on Sliding Bearing, Pressure of Lubricating Oil & Load Coefficient for Bearing and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Total Projected Area of Bearing Pad?

In this formula, Total Projected Area of Bearing Pad uses Load Acting on Sliding Bearing, Pressure of Lubricating Oil & Load Coefficient for Bearing. We can use 2 other way(s) to calculate the same, which is/are as follows -

Total Projected Area of Bearing Pad = Dimension X of Bearing Pad*Dimension Y of Bearing Pad
Total Projected Area of Bearing Pad = Flow Coefficient*Load Acting on Sliding Bearing*(Oil Film thickness^3)/(Dynamic Viscosity of Lubricant*Flow of Lubricant)

Home

FREE PDFs

🔍 Search