Total Pressure using Mole Fraction and Saturated Pressure Calculator

✖Mole Fraction of MVC in Liq Phase gives idea about the mole fraction of more volatile component in the mixture of less and more volatile component.ⓘ Mole Fraction of MVC in Liq Phase [X]			+10% -10%
✖Partial Pressure of More Volatile Component is the Pressure that would be exerted by the More Volatile Component in a mixture of Less and More Volatile Component.ⓘ Partial Pressure of More Volatile Component [P_MVC]			+10% -10%
✖Partial Pressure of Less Volatile Component is the Pressure that would be exerted by Less Volatile Component in a mixture of Less and More Volatile Component.ⓘ Partial Pressure of Less Volatile Component [P_LVC]			+10% -10%

✖Total pressure of Gas is the sum of all the forces that the gas molecules exert on the walls of their container.ⓘ Total Pressure using Mole Fraction and Saturated Pressure [P_T]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Distillation Formula PDF PDF Image

Total Pressure using Mole Fraction and Saturated Pressure Solution

STEP 0: Pre-Calculation Summary

Formula Used

Total Pressure of Gas = (Mole Fraction of MVC in Liq Phase*Partial Pressure of More Volatile Component)+((1-Mole Fraction of MVC in Liq Phase)*Partial Pressure of Less Volatile Component)
P_T = (X*P_MVC)+((1-X)*P_LVC)
This formula uses 4 Variables

Variables Used

Total Pressure of Gas - (Measured in Pascal) - Total pressure of Gas is the sum of all the forces that the gas molecules exert on the walls of their container.
Mole Fraction of MVC in Liq Phase - Mole Fraction of MVC in Liq Phase gives idea about the mole fraction of more volatile component in the mixture of less and more volatile component.
Partial Pressure of More Volatile Component - (Measured in Pascal) - Partial Pressure of More Volatile Component is the Pressure that would be exerted by the More Volatile Component in a mixture of Less and More Volatile Component.
Partial Pressure of Less Volatile Component - (Measured in Pascal) - Partial Pressure of Less Volatile Component is the Pressure that would be exerted by Less Volatile Component in a mixture of Less and More Volatile Component.

STEP 1: Convert Input(s) to Base Unit

Mole Fraction of MVC in Liq Phase: 0.55 --> No Conversion Required
Partial Pressure of More Volatile Component: 250000 Pascal --> 250000 Pascal No Conversion Required
Partial Pressure of Less Volatile Component: 35000 Pascal --> 35000 Pascal No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

P_T = (X*P_MVC)+((1-X)*P_LVC) --> (0.55*250000)+((1-0.55)*35000)

Evaluating ... ...

P_T = 153250

STEP 3: Convert Result to Output's Unit

153250 Pascal --> No Conversion Required

FINAL ANSWER

153250 Pascal <-- Total Pressure of Gas

(Calculation completed in 00.020 seconds)

You are here -

Home » Engineering » Chemical Engineering » Mass Transfer Operations » Distillation » Relative Volatility and Vaporization Ratio » Total Pressure using Mole Fraction and Saturated Pressure

Credits

Created by Ayush gupta

University School of Chemical Technology-USCT (GGSIPU), New Delhi

Ayush gupta has created this Calculator and 300+ more calculators!

Verified by swetha samavedam

Delhi Technological University (DTU), delhi

swetha samavedam has verified this Calculator and 10 more calculators!

< Relative Volatility and Vaporization Ratio Calculators

Relative Volatility using Mole Fraction

LaTeX Go Relative Volatility = (Mole Fraction of Component in Vapor Phase/(1-Mole Fraction of Component in Vapor Phase))/(Mole Fraction of Component in Liquid Phase/(1-Mole Fraction of Component in Liquid Phase))

Total Pressure using Mole Fraction and Saturated Pressure

LaTeX Go Total Pressure of Gas = (Mole Fraction of MVC in Liq Phase*Partial Pressure of More Volatile Component)+((1-Mole Fraction of MVC in Liq Phase)*Partial Pressure of Less Volatile Component)

Relative Volatility using Vapour Pressure

LaTeX Go Relative Volatility = Saturated Vapour Pressure of More Volatile Comp/Saturated Vapour Pressure of Less Volatile Comp

Equilibrium Vaporization Ratio for More Volatile Component

LaTeX Go Equilibrium Vaporization Ratio of MVC = Mole Fraction of MVC in Vapor Phase/Mole Fraction of MVC in Liquid Phase

< Important Formulas in Distillation Mass Transfer Operation Calculators

Feed Q-Value in Distillation Column

LaTeX Go Q-value in Mass Transfer = Heat Required to Convert Feed to Saturated Vapor/Molal Latent Heat of Vaporization of Saturated Liq

External Reflux Ratio

LaTeX Go External Reflux Ratio = External Reflux Flowrate to Distillation Column/Distillate Flowrate from Distillation Column

Internal Reflux Ratio

LaTeX Go Internal Reflux Ratio = Internal Reflux Flowrate to Distillation Column/Distillate Flowrate from Distillation Column

Boil-Up Ratio

LaTeX Go Boil-Up Ratio = Boil-Up Flowrate to the Distillation Column/Residue Flowrate from Distillation Column

Total Pressure using Mole Fraction and Saturated Pressure Formula

LaTeX Go

What is Partial Pressure?

The pressure that would be exerted by one of the gases in a mixture if it occupied the same volume on its own. In simple words Partial pressure is the pressure that an individual gas exerts in a mixture of gases.

What is Mole Fraction?

The ratio of the number of moles of one component of a solution or other mixture to the total number of moles representing all of the components.

How to Calculate Total Pressure using Mole Fraction and Saturated Pressure?

Total Pressure using Mole Fraction and Saturated Pressure calculator uses Total Pressure of Gas = (Mole Fraction of MVC in Liq Phase*Partial Pressure of More Volatile Component)+((1-Mole Fraction of MVC in Liq Phase)*Partial Pressure of Less Volatile Component) to calculate the Total Pressure of Gas, The Total Pressure using mole fraction and saturated pressure formula is defined as the sum of the pressure multiplied by mole fraction of both components. MVC=More Volatile Component LVC = Less Volatile Component. Total Pressure of Gas is denoted by P_T symbol.

How to calculate Total Pressure using Mole Fraction and Saturated Pressure using this online calculator? To use this online calculator for Total Pressure using Mole Fraction and Saturated Pressure, enter Mole Fraction of MVC in Liq Phase (X), Partial Pressure of More Volatile Component (P_MVC) & Partial Pressure of Less Volatile Component (P_LVC) and hit the calculate button. Here is how the Total Pressure using Mole Fraction and Saturated Pressure calculation can be explained with given input values -> 153250 = (0.55*250000)+((1-0.55)*35000).

FAQ

What is Total Pressure using Mole Fraction and Saturated Pressure?

The Total Pressure using mole fraction and saturated pressure formula is defined as the sum of the pressure multiplied by mole fraction of both components. MVC=More Volatile Component LVC = Less Volatile Component and is represented as P_T = (X*P_MVC)+((1-X)*P_LVC) or Total Pressure of Gas = (Mole Fraction of MVC in Liq Phase*Partial Pressure of More Volatile Component)+((1-Mole Fraction of MVC in Liq Phase)*Partial Pressure of Less Volatile Component). Mole Fraction of MVC in Liq Phase gives idea about the mole fraction of more volatile component in the mixture of less and more volatile component, Partial Pressure of More Volatile Component is the Pressure that would be exerted by the More Volatile Component in a mixture of Less and More Volatile Component & Partial Pressure of Less Volatile Component is the Pressure that would be exerted by Less Volatile Component in a mixture of Less and More Volatile Component.

How to calculate Total Pressure using Mole Fraction and Saturated Pressure?

The Total Pressure using mole fraction and saturated pressure formula is defined as the sum of the pressure multiplied by mole fraction of both components. MVC=More Volatile Component LVC = Less Volatile Component is calculated using Total Pressure of Gas = (Mole Fraction of MVC in Liq Phase*Partial Pressure of More Volatile Component)+((1-Mole Fraction of MVC in Liq Phase)*Partial Pressure of Less Volatile Component). To calculate Total Pressure using Mole Fraction and Saturated Pressure, you need Mole Fraction of MVC in Liq Phase (X), Partial Pressure of More Volatile Component (P_MVC) & Partial Pressure of Less Volatile Component (P_LVC). With our tool, you need to enter the respective value for Mole Fraction of MVC in Liq Phase, Partial Pressure of More Volatile Component & Partial Pressure of Less Volatile Component and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search