Total Pressure per unit Area for Dams on Soft Foundations Calculator

✖Depth of Dam is the distance from the top or surface to the bottom of something.ⓘ Depth of Dam [D]			+10% -10%
✖Specific Weight of Water in KN per cubic meter is the weight per unit volume of water.ⓘ Specific Weight of Water in KN per cubic meter [W]			+10% -10%
✖Degree of Saturation is the ratio of the volume of water to the volume of voids.ⓘ Degree of Saturation [S]			+10% -10%
✖Void Ratio is the ratio of the volume of voids to the volume of solids.ⓘ Void Ratio [e]			+10% -10%

✖Total Pressure at given Point in a flow is the pressure that would exist if the flow were slowed down isotropically to zero velocity.ⓘ Total Pressure per unit Area for Dams on Soft Foundations [P₀]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Buttress Dams Formulas PDF PDF Image

Total Pressure per unit Area for Dams on Soft Foundations Solution

STEP 0: Pre-Calculation Summary

Formula Used

Total Pressure at given Point = Depth of Dam*Specific Weight of Water in KN per cubic meter*((Degree of Saturation+Void Ratio)/(1+Void Ratio))
P₀ = D*W*((S+e)/(1+e))
This formula uses 5 Variables

Variables Used

Total Pressure at given Point - (Measured in Pascal) - Total Pressure at given Point in a flow is the pressure that would exist if the flow were slowed down isotropically to zero velocity.
Depth of Dam - (Measured in Meter) - Depth of Dam is the distance from the top or surface to the bottom of something.
Specific Weight of Water in KN per cubic meter - (Measured in Kilonewton per Cubic Meter) - Specific Weight of Water in KN per cubic meter is the weight per unit volume of water.
Degree of Saturation - Degree of Saturation is the ratio of the volume of water to the volume of voids.
Void Ratio - Void Ratio is the ratio of the volume of voids to the volume of solids.

STEP 1: Convert Input(s) to Base Unit

Depth of Dam: 3 Meter --> 3 Meter No Conversion Required
Specific Weight of Water in KN per cubic meter: 9.81 Kilonewton per Cubic Meter --> 9.81 Kilonewton per Cubic Meter No Conversion Required
Degree of Saturation: 7 --> No Conversion Required
Void Ratio: 1.2 --> No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

P₀ = D*W*((S+e)/(1+e)) --> 3*9.81*((7+1.2)/(1+1.2))

Evaluating ... ...

P₀ = 109.693636363636

STEP 3: Convert Result to Output's Unit

109.693636363636 Pascal --> No Conversion Required

FINAL ANSWER

109.693636363636 ≈ 109.6936 Pascal <-- Total Pressure at given Point

(Calculation completed in 00.020 seconds)

You are here -

Home » Engineering » Civil » Hydraulics and Waterworks » Dams » Buttress Dams » Dams on Soft or Porous Foundations » Dams on Soft or Porous Foundations by Darcy’s law » Total Pressure per unit Area for Dams on Soft Foundations

Credits

Created by Rithik Agrawal

National Institute of Technology Karnataka (NITK), Surathkal

Rithik Agrawal has created this Calculator and 1300+ more calculators!

Verified by Mithila Muthamma PA

Coorg Institute of Technology (CIT), Coorg

Mithila Muthamma PA has verified this Calculator and 700+ more calculators!

< Dams on Soft or Porous Foundations by Darcy’s law Calculators

Velocity given Length of Conduit after using Area of Pipe in Discharge

LaTeX Go Maximum Velocity = Material Coefficient*Head under Flow/Length of Pipe

Length of Conduit after using Area of Pipe in Discharge

LaTeX Go Length of Pipe = Material Coefficient*Head under Flow/Maximum Velocity

Minimum Safe Length of Travel path under Dams on Soft or Porous Foundations

LaTeX Go Minimum Safe Length of Travel path = New Material Coefficient C2*Head under Flow

New Material Coefficient C2 for Dams on Soft or Porous Foundations

LaTeX Go New Material Coefficient C2 = Material Coefficient/Maximum Velocity

Total Pressure per unit Area for Dams on Soft Foundations Formula

LaTeX Go

Total Pressure at given Point = Depth of Dam*Specific Weight of Water in KN per cubic meter*((Degree of Saturation+Void Ratio)/(1+Void Ratio))
P₀ = D*W*((S+e)/(1+e))

What are Dams on Soft or Porous Foundations?

Constructed as a simple homogenous embankment of well compacted earth, earth dams are classified as Homogenous Earth Dams, Zoned Earth Dams and Diaphragm Dams.This type of dam is usually built on an impervious foundation such as solid rock or clay. The next type of Earth dam is Diaphragm Dam.

How to Calculate Total Pressure per unit Area for Dams on Soft Foundations?

Total Pressure per unit Area for Dams on Soft Foundations calculator uses Total Pressure at given Point = Depth of Dam*Specific Weight of Water in KN per cubic meter*((Degree of Saturation+Void Ratio)/(1+Void Ratio)) to calculate the Total Pressure at given Point, The Total Pressure per unit Area for Dams on Soft Foundations formula is defined as pressure generated by the water under the dams. Total Pressure at given Point is denoted by P₀ symbol.

How to calculate Total Pressure per unit Area for Dams on Soft Foundations using this online calculator? To use this online calculator for Total Pressure per unit Area for Dams on Soft Foundations, enter Depth of Dam (D), Specific Weight of Water in KN per cubic meter (W), Degree of Saturation (S) & Void Ratio (e) and hit the calculate button. Here is how the Total Pressure per unit Area for Dams on Soft Foundations calculation can be explained with given input values -> 109.6936 = 3*9810*((7+1.2)/(1+1.2)).

FAQ

What is Total Pressure per unit Area for Dams on Soft Foundations?

The Total Pressure per unit Area for Dams on Soft Foundations formula is defined as pressure generated by the water under the dams and is represented as P₀ = D*W*((S+e)/(1+e)) or Total Pressure at given Point = Depth of Dam*Specific Weight of Water in KN per cubic meter*((Degree of Saturation+Void Ratio)/(1+Void Ratio)). Depth of Dam is the distance from the top or surface to the bottom of something, Specific Weight of Water in KN per cubic meter is the weight per unit volume of water, Degree of Saturation is the ratio of the volume of water to the volume of voids & Void Ratio is the ratio of the volume of voids to the volume of solids.

How to calculate Total Pressure per unit Area for Dams on Soft Foundations?

The Total Pressure per unit Area for Dams on Soft Foundations formula is defined as pressure generated by the water under the dams is calculated using Total Pressure at given Point = Depth of Dam*Specific Weight of Water in KN per cubic meter*((Degree of Saturation+Void Ratio)/(1+Void Ratio)). To calculate Total Pressure per unit Area for Dams on Soft Foundations, you need Depth of Dam (D), Specific Weight of Water in KN per cubic meter (W), Degree of Saturation (S) & Void Ratio (e). With our tool, you need to enter the respective value for Depth of Dam, Specific Weight of Water in KN per cubic meter, Degree of Saturation & Void Ratio and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search