Total Power Supplied in NMOS Calculator

✖Supply voltage is the voltage level supplied to an electronic device, and it is a critical parameter that affects the performance and reliability of the device.ⓘ Supply Voltage [V_dd]			+10% -10%
✖Drain current in NMOS is the electric current flowing from the drain to the source of a field-effect transistor (FET) or a metal-oxide-semiconductor field-effect transistor (MOSFET).ⓘ Drain Current in NMOS [I_d]			+10% -10%
✖Current is the RMS value of the currents passing through n-type MOSFETs in a combined state circuit.ⓘ Current [I]			+10% -10%

✖Power supplied are used in a wide range of applications, from powering small electronic devices to providing electricity to large industrial machinery and systems.ⓘ Total Power Supplied in NMOS [P_S]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download MOSFET Formula PDF PDF Image

Total Power Supplied in NMOS Solution

STEP 0: Pre-Calculation Summary

Formula Used

Power Supplied = Supply Voltage*(Drain Current in NMOS+Current)
P_S = V_dd*(I_d+I)
This formula uses 4 Variables

Variables Used

Power Supplied - (Measured in Watt) - Power supplied are used in a wide range of applications, from powering small electronic devices to providing electricity to large industrial machinery and systems.
Supply Voltage - (Measured in Volt) - Supply voltage is the voltage level supplied to an electronic device, and it is a critical parameter that affects the performance and reliability of the device.
Drain Current in NMOS - (Measured in Ampere) - Drain current in NMOS is the electric current flowing from the drain to the source of a field-effect transistor (FET) or a metal-oxide-semiconductor field-effect transistor (MOSFET).
Current - (Measured in Ampere) - Current is the RMS value of the currents passing through n-type MOSFETs in a combined state circuit.

STEP 1: Convert Input(s) to Base Unit

Supply Voltage: 6 Volt --> 6 Volt No Conversion Required
Drain Current in NMOS: 239 Milliampere --> 0.239 Ampere (Check conversion here)
Current: 5 Milliampere --> 0.005 Ampere (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

P_S = V_dd*(I_d+I) --> 6*(0.239+0.005)

Evaluating ... ...

P_S = 1.464

STEP 3: Convert Result to Output's Unit

1.464 Watt -->1464 Milliwatt (Check conversion here)

FINAL ANSWER

1464 Milliwatt <-- Power Supplied

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Electronics » MOSFET » Analog Electronics » N Channel Enhancement » Total Power Supplied in NMOS

Credits

Created by Payal Priya

Birsa Institute of Technology (BIT), Sindri

Payal Priya has created this Calculator and 600+ more calculators!

Verified by Anshika Arya

National Institute Of Technology (NIT), Hamirpur

Anshika Arya has verified this Calculator and 2500+ more calculators!

< N Channel Enhancement Calculators

Current Entering Drain-Source in Triode Region of NMOS

LaTeX Go Drain Current in NMOS = Process Transconductance Parameter in NMOS*Width of Channel/Length of the Channel*((Gate Source Voltage-Threshold Voltage)*Drain Source Voltage-1/2*(Drain Source Voltage)^2)

Current Entering Drain Terminal of NMOS given Gate Source Voltage

NMOS as Linear Resistance

LaTeX Go Linear Resistance = Length of the Channel/(Mobility of Electrons at Surface of Channel*Oxide Capacitance*Width of Channel*(Gate Source Voltage-Threshold Voltage))

Electron Drift Velocity of Channel in NMOS Transistor

LaTeX Go Electron Drift Velocity = Mobility of Electrons at Surface of Channel*Electric Field across Length of Channel

Total Power Supplied in NMOS Formula

LaTeX Go

Power Supplied = Supply Voltage*(Drain Current in NMOS+Current)
P_S = V_dd*(I_d+I)

What is power dissipated?

The definition of power dissipation is the process by which an electronic or electrical device produces heat (energy loss or waste) as an undesirable derivative of its primary action. Such as the case with central processing units, power dissipation is a principal concern in computer architecture. Furthermore, power dissipation in resistors is considered a naturally occurring phenomenon. The fact remains that all resistors that are part of a circuit and have a voltage drop across them will dissipate electrical power. Moreover, this electrical power converts into heat energy, and therefore all resistors have a (power) rating. Also, a resistor’s power rating is a classification that parameterizes the maximum power that it can dissipate before it reaches critical failure.

How to Calculate Total Power Supplied in NMOS?

Total Power Supplied in NMOS calculator uses Power Supplied = Supply Voltage*(Drain Current in NMOS+Current) to calculate the Power Supplied, The total power supplied in NMOS is equal to the product of the supply voltage of MOSFET and the total current. It is denoted by Ps. Power Supplied is denoted by P_S symbol.

How to calculate Total Power Supplied in NMOS using this online calculator? To use this online calculator for Total Power Supplied in NMOS, enter Supply Voltage (V_dd), Drain Current in NMOS (I_d) & Current (I) and hit the calculate button. Here is how the Total Power Supplied in NMOS calculation can be explained with given input values -> 1.5E+6 = 6*(0.239+0.005).

FAQ

What is Total Power Supplied in NMOS?

The total power supplied in NMOS is equal to the product of the supply voltage of MOSFET and the total current. It is denoted by Ps and is represented as P_S = V_dd*(I_d+I) or Power Supplied = Supply Voltage*(Drain Current in NMOS+Current). Supply voltage is the voltage level supplied to an electronic device, and it is a critical parameter that affects the performance and reliability of the device, Drain current in NMOS is the electric current flowing from the drain to the source of a field-effect transistor (FET) or a metal-oxide-semiconductor field-effect transistor (MOSFET) & Current is the RMS value of the currents passing through n-type MOSFETs in a combined state circuit.

How to calculate Total Power Supplied in NMOS?

The total power supplied in NMOS is equal to the product of the supply voltage of MOSFET and the total current. It is denoted by Ps is calculated using Power Supplied = Supply Voltage*(Drain Current in NMOS+Current). To calculate Total Power Supplied in NMOS, you need Supply Voltage (V_dd), Drain Current in NMOS (I_d) & Current (I). With our tool, you need to enter the respective value for Supply Voltage, Drain Current in NMOS & Current and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search