Total Number of Main Bars Solution

STEP 0: Pre-Calculation Summary
Formula Used
Number of Main Bars = (Clear Span of Longer Side/Spacing between Bars)+1
Nomain bars = (Lclear(longer side)/Sbar)+1
This formula uses 3 Variables
Variables Used
Number of Main Bars - Number of Main Bars is the number of reinforcement bars that are placed in the tension zone of the slab to resist the bending moment & to transfer the loads to the supports.
Clear Span of Longer Side - (Measured in Meter) - Clear Span of Longer Side is the clear distance between two support of the longer side of the structural component.
Spacing between Bars - (Measured in Meter) - Spacing between Bars is the distance between two consecutive bars in the slab.
STEP 1: Convert Input(s) to Base Unit
Clear Span of Longer Side: 6001 Millimeter --> 6.001 Meter (Check conversion ​here)
Spacing between Bars: 150 Millimeter --> 0.15 Meter (Check conversion ​here)
STEP 2: Evaluate Formula
Substituting Input Values in Formula
Nomain bars = (Lclear(longer side)/Sbar)+1 --> (6.001/0.15)+1
Evaluating ... ...
Nomain bars = 41.0066666666667
STEP 3: Convert Result to Output's Unit
41.0066666666667 --> No Conversion Required
FINAL ANSWER
41.0066666666667 41.00667 <-- Number of Main Bars
(Calculation completed in 00.004 seconds)

Credits

Creator Image
Created by Smriti Singh
MIT Academy of engineering, Pune (MITAOE), Alandi, Pune
Smriti Singh has created this Calculator and 25+ more calculators!
Verifier Image
Verified by Ayush Singh
Gautam Buddha University (GBU), Greater Noida
Ayush Singh has verified this Calculator and 100+ more calculators!

Bar Bending Schedule for RCC slab Calculators

Cutting Length of Main Bar
​ LaTeX ​ Go Cutting Length of Main Bar = Clear Span of Shorter Side+(2*Beam Width)-(2*Concrete Cover for Slabs)+(0.42*Effective Depth of Slab)-(2*Diameter of Reinforcement Bar)
Cutting Length of Distribution Bar
​ LaTeX ​ Go Cutting Length of Distribution Bar = Clear Span of Longer Side-(2*Concrete Cover for Slabs)
Total Number of Distribution Bars
​ LaTeX ​ Go Number of Distribution Bars = (Clear Span of Shorter Side/Spacing between Bars)+1
Total Number of Main Bars
​ LaTeX ​ Go Number of Main Bars = (Clear Span of Longer Side/Spacing between Bars)+1

Total Number of Main Bars Formula

​LaTeX ​Go
Number of Main Bars = (Clear Span of Longer Side/Spacing between Bars)+1
Nomain bars = (Lclear(longer side)/Sbar)+1

What are Main Bars?

The reinforcement bars that are placed in the tension zone of the slab to resist the bending moment & to transfer the superimposed loads to the supports that are provided for the slab are called main bars.
Main bars are always placed at the bottom part of the slab reinforcement and distribution bars rest over the main bar as shown in the above drawing.
The diameter of the main bar should not be less than 8mm for the HYSD bar and 10mm for plain bars.

How to Calculate Total Number of Main Bars?

Total Number of Main Bars calculator uses Number of Main Bars = (Clear Span of Longer Side/Spacing between Bars)+1 to calculate the Number of Main Bars, The Total Number of Main Bars formula is defined as calculating the number of main bars needed for the RCC slab of a given cross-sectional area. Number of Main Bars is denoted by Nomain bars symbol.

How to calculate Total Number of Main Bars using this online calculator? To use this online calculator for Total Number of Main Bars, enter Clear Span of Longer Side (Lclear(longer side)) & Spacing between Bars (Sbar) and hit the calculate button. Here is how the Total Number of Main Bars calculation can be explained with given input values -> 41 = (6.001/0.15)+1.

FAQ

What is Total Number of Main Bars?
The Total Number of Main Bars formula is defined as calculating the number of main bars needed for the RCC slab of a given cross-sectional area and is represented as Nomain bars = (Lclear(longer side)/Sbar)+1 or Number of Main Bars = (Clear Span of Longer Side/Spacing between Bars)+1. Clear Span of Longer Side is the clear distance between two support of the longer side of the structural component & Spacing between Bars is the distance between two consecutive bars in the slab.
How to calculate Total Number of Main Bars?
The Total Number of Main Bars formula is defined as calculating the number of main bars needed for the RCC slab of a given cross-sectional area is calculated using Number of Main Bars = (Clear Span of Longer Side/Spacing between Bars)+1. To calculate Total Number of Main Bars, you need Clear Span of Longer Side (Lclear(longer side)) & Spacing between Bars (Sbar). With our tool, you need to enter the respective value for Clear Span of Longer Side & Spacing between Bars and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!