Total Load Carried by Plates in Compound Weld Calculator

✖Shear Stress is force tending to cause deformation of a material by slippage along a plane or planes parallel to the imposed stress.ⓘ Shear Stress [𝜏]			+10% -10%
✖Length of Parallel Fillet Weld is the distance between two consecutive end of welds.ⓘ Length of Parallel Fillet Weld [L_parallel]			+10% -10%
✖The thickness of plate is the state or quality of being thick. The measure of the smallest dimension of a solid figure: a board of two-inch thickness.ⓘ Thickness of Plate [t_plate]			+10% -10%
✖Tensile Stress can be defined as the magnitude of force applied along the weld, which is divided by the cross-sectional area of the weld in a direction perpendicular to the applied force.ⓘ Tensile Stress [σ_t]			+10% -10%
✖The Length of Single Fillet Lap Weld is the distance between two consecutive ends of welds.ⓘ Length of Single Fillet Lap Weld [L_single]			+10% -10%

✖Load on weld is the instantaneous load applied perpendicular to the specimen cross section.ⓘ Total Load Carried by Plates in Compound Weld [W]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Strength of Materials Formula PDF PDF Image

Total Load Carried by Plates in Compound Weld Solution

STEP 0: Pre-Calculation Summary

Formula Used

Load on weld = 1.414*Shear Stress*Length of Parallel Fillet Weld*Thickness of Plate+0.707*Tensile Stress*Length of Single Fillet Lap Weld*Thickness of Plate
W = 1.414*𝜏*L_parallel*t_plate+0.707*σ_t*L_single*t_plate
This formula uses 6 Variables

Variables Used

Load on weld - (Measured in Newton) - Load on weld is the instantaneous load applied perpendicular to the specimen cross section.
Shear Stress - (Measured in Pascal) - Shear Stress is force tending to cause deformation of a material by slippage along a plane or planes parallel to the imposed stress.
Length of Parallel Fillet Weld - (Measured in Meter) - Length of Parallel Fillet Weld is the distance between two consecutive end of welds.
Thickness of Plate - (Measured in Meter) - The thickness of plate is the state or quality of being thick. The measure of the smallest dimension of a solid figure: a board of two-inch thickness.
Tensile Stress - (Measured in Pascal) - Tensile Stress can be defined as the magnitude of force applied along the weld, which is divided by the cross-sectional area of the weld in a direction perpendicular to the applied force.
Length of Single Fillet Lap Weld - (Measured in Meter) - The Length of Single Fillet Lap Weld is the distance between two consecutive ends of welds.

STEP 1: Convert Input(s) to Base Unit

Shear Stress: 2.4 Megapascal --> 2400000 Pascal (Check conversion here)
Length of Parallel Fillet Weld: 200 Millimeter --> 0.2 Meter (Check conversion here)
Thickness of Plate: 12 Millimeter --> 0.012 Meter (Check conversion here)
Tensile Stress: 32 Megapascal --> 32000000 Pascal (Check conversion here)
Length of Single Fillet Lap Weld: 1.5 Millimeter --> 0.0015 Meter (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

W = 1.414*𝜏*L_parallel*t_plate+0.707*σ_t*L_single*t_plate --> 1.414*2400000*0.2*0.012+0.707*32000000*0.0015*0.012

Evaluating ... ...

W = 8551.872

STEP 3: Convert Result to Output's Unit

8551.872 Newton -->8.551872 Kilonewton (Check conversion here)

FINAL ANSWER

8.551872 Kilonewton <-- Load on weld

(Calculation completed in 00.035 seconds)

You are here -

Home » Physics » Strength of Materials » Welded Joints » Mechanical » Analysis of Compound Weld » Total Load Carried by Plates in Compound Weld

Credits

Created by Anshika Arya

National Institute Of Technology (NIT), Hamirpur

Anshika Arya has created this Calculator and 2000+ more calculators!

Verified by Payal Priya

Birsa Institute of Technology (BIT), Sindri

Payal Priya has verified this Calculator and 1900+ more calculators!

< Analysis of Compound Weld Calculators

Length of Single Fillet Lap Weld given Load Carried by Single Fillet Lap Weld

LaTeX Go Length of Single Fillet Lap Weld = Load on weld/(0.707*Tensile Stress*Thickness of Plate)

Allowable Tensile Stress given Load Carried by Single Fillet Lap Weld

LaTeX Go Tensile Stress = Load on weld/(0.707*Length of Single Fillet Lap Weld*Thickness of Plate)

Thickness of Plates given Load Carried by Single Fillet Lap Weld

LaTeX Go Thickness of Plate = Load on weld/(0.707*Tensile Stress*Length of Single Fillet Lap Weld)

Load Carried by Single Fillet Lap Weld

LaTeX Go Load on weld = 0.707*Tensile Stress*Length of Single Fillet Lap Weld*Thickness of Plate

Total Load Carried by Plates in Compound Weld Formula

LaTeX Go

What do you mean by maximum shear stress theory?

The maximum shear stress theory states that the failure or yielding of a ductile material will occur when the maximum shear stress of the material equals or exceeds the shear stress value at the yield point in the uniaxial tensile test.

How to Calculate Total Load Carried by Plates in Compound Weld?

Total Load Carried by Plates in Compound Weld calculator uses Load on weld = 1.414*Shear Stress*Length of Parallel Fillet Weld*Thickness of Plate+0.707*Tensile Stress*Length of Single Fillet Lap Weld*Thickness of Plate to calculate the Load on weld, The Total load carried by plates in compound weld formula is defined as the pressure or force created on the weld. Load on weld is denoted by W symbol.

How to calculate Total Load Carried by Plates in Compound Weld using this online calculator? To use this online calculator for Total Load Carried by Plates in Compound Weld, enter Shear Stress (𝜏), Length of Parallel Fillet Weld (L_parallel), Thickness of Plate (t_plate), Tensile Stress (σ_t) & Length of Single Fillet Lap Weld (L_single) and hit the calculate button. Here is how the Total Load Carried by Plates in Compound Weld calculation can be explained with given input values -> 0.008552 = 1.414*2400000*0.2*0.012+0.707*32000000*0.0015*0.012.

FAQ

What is Total Load Carried by Plates in Compound Weld?

The Total load carried by plates in compound weld formula is defined as the pressure or force created on the weld and is represented as W = 1.414*𝜏*L_parallel*t_plate+0.707*σ_t*L_single*t_plate or Load on weld = 1.414*Shear Stress*Length of Parallel Fillet Weld*Thickness of Plate+0.707*Tensile Stress*Length of Single Fillet Lap Weld*Thickness of Plate. Shear Stress is force tending to cause deformation of a material by slippage along a plane or planes parallel to the imposed stress, Length of Parallel Fillet Weld is the distance between two consecutive end of welds, The thickness of plate is the state or quality of being thick. The measure of the smallest dimension of a solid figure: a board of two-inch thickness, Tensile Stress can be defined as the magnitude of force applied along the weld, which is divided by the cross-sectional area of the weld in a direction perpendicular to the applied force & The Length of Single Fillet Lap Weld is the distance between two consecutive ends of welds.

How to calculate Total Load Carried by Plates in Compound Weld?

The Total load carried by plates in compound weld formula is defined as the pressure or force created on the weld is calculated using Load on weld = 1.414*Shear Stress*Length of Parallel Fillet Weld*Thickness of Plate+0.707*Tensile Stress*Length of Single Fillet Lap Weld*Thickness of Plate. To calculate Total Load Carried by Plates in Compound Weld, you need Shear Stress (𝜏), Length of Parallel Fillet Weld (L_parallel), Thickness of Plate (t_plate), Tensile Stress (σ_t) & Length of Single Fillet Lap Weld (L_single). With our tool, you need to enter the respective value for Shear Stress, Length of Parallel Fillet Weld, Thickness of Plate, Tensile Stress & Length of Single Fillet Lap Weld and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Load on weld?

In this formula, Load on weld uses Shear Stress, Length of Parallel Fillet Weld, Thickness of Plate, Tensile Stress & Length of Single Fillet Lap Weld. We can use 2 other way(s) to calculate the same, which is/are as follows -

Load on weld = 0.707*Tensile Stress*Length of Single Fillet Lap Weld*Thickness of Plate
Load on weld = 1.414*Shear Stress*Length of Parallel Fillet Weld*Thickness of Plate

Home

FREE PDFs

🔍 Search