Total Length of Weld given Area of Unsymmetrical Weld Calculator

✖Weld Bed Area is that area which is prepared by joining two metals for welding.ⓘ Weld Bed Area [A_{weld bed}]			+10% -10%
✖The Throat Thickness is the shortest distance from the root to the face of the weld.ⓘ Throat Thickness [t_throat]			+10% -10%

✖Total length of weld is the linear distance of total weld segment.ⓘ Total Length of Weld given Area of Unsymmetrical Weld [L]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Strength of Materials Formula PDF PDF Image

Total Length of Weld given Area of Unsymmetrical Weld Solution

STEP 0: Pre-Calculation Summary

Formula Used

Total length of weld = Weld Bed Area/(Throat Thickness)
L = A_{weld bed}/(t_throat)
This formula uses 3 Variables

Variables Used

Total length of weld - (Measured in Meter) - Total length of weld is the linear distance of total weld segment.
Weld Bed Area - (Measured in Square Meter) - Weld Bed Area is that area which is prepared by joining two metals for welding.
Throat Thickness - (Measured in Meter) - The Throat Thickness is the shortest distance from the root to the face of the weld.

STEP 1: Convert Input(s) to Base Unit

Weld Bed Area: 900 Square Millimeter --> 0.0009 Square Meter (Check conversion here)
Throat Thickness: 50 Millimeter --> 0.05 Meter (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

L = A_{weld bed}/(t_throat) --> 0.0009/(0.05)

Evaluating ... ...

L = 0.018

STEP 3: Convert Result to Output's Unit

0.018 Meter -->18 Millimeter (Check conversion here)

FINAL ANSWER

18 Millimeter <-- Total length of weld

(Calculation completed in 00.004 seconds)

You are here -

Home » Physics » Strength of Materials » Welded Joints » Analysis of Unsymmetrical Welded Sections which are Loaded Axially » Mechanical » Weld Parameters » Total Length of Weld given Area of Unsymmetrical Weld

Credits

Created by Anshika Arya

National Institute Of Technology (NIT), Hamirpur

Anshika Arya has created this Calculator and 2000+ more calculators!

Verified by Payal Priya

Birsa Institute of Technology (BIT), Sindri

Payal Priya has verified this Calculator and 1900+ more calculators!

< Weld Parameters Calculators

Total Length of Weld given Length of Top Weld

LaTeX Go Total length of weld = (Length of Top Weld*(Distance of top weld from gravity axis+Distance of Bottom Weld from Gravity Axis))/Distance of Bottom Weld from Gravity Axis

Axial Load on Angle

LaTeX Go Axial load on angle = Resistance of weld per unit length*(Length of Top Weld+Length of Bottom Weld)

Axial Load on Angle given Resistance of Bottom and Top Weld

LaTeX Go Axial load on angle = Resistance of top weld+Resistance of bottom weld

Total Length of Weld given Length of Top and Bottom Weld

LaTeX Go Total length of weld = Length of Top Weld+Length of Bottom Weld

Total Length of Weld given Area of Unsymmetrical Weld Formula

LaTeX Go

Total length of weld = Weld Bed Area/(Throat Thickness)
L = A_{weld bed}/(t_throat)

What is axial load and radial load?

Radial Load is defined as the maximum force that can be applied to the shaft in the radial direction (any direction perpendicular to the motor shaft axis). Axial Load is defined as the maximum force that can be applied to the shaft in the axial direction (in the same axis as or parallel to the motor shaft axis).

How to Calculate Total Length of Weld given Area of Unsymmetrical Weld?

Total Length of Weld given Area of Unsymmetrical Weld calculator uses Total length of weld = Weld Bed Area/(Throat Thickness) to calculate the Total length of weld, The Total length of weld given area of unsymmetrical weld formula is defined as the measurement or extent of the weld from end to end. Total length of weld is denoted by L symbol.

How to calculate Total Length of Weld given Area of Unsymmetrical Weld using this online calculator? To use this online calculator for Total Length of Weld given Area of Unsymmetrical Weld, enter Weld Bed Area (A_{weld bed}) & Throat Thickness (t_throat) and hit the calculate button. Here is how the Total Length of Weld given Area of Unsymmetrical Weld calculation can be explained with given input values -> 18000 = 0.0009/(0.05).

FAQ

What is Total Length of Weld given Area of Unsymmetrical Weld?

The Total length of weld given area of unsymmetrical weld formula is defined as the measurement or extent of the weld from end to end and is represented as L = A_{weld bed}/(t_throat) or Total length of weld = Weld Bed Area/(Throat Thickness). Weld Bed Area is that area which is prepared by joining two metals for welding & The Throat Thickness is the shortest distance from the root to the face of the weld.

How to calculate Total Length of Weld given Area of Unsymmetrical Weld?

The Total length of weld given area of unsymmetrical weld formula is defined as the measurement or extent of the weld from end to end is calculated using Total length of weld = Weld Bed Area/(Throat Thickness). To calculate Total Length of Weld given Area of Unsymmetrical Weld, you need Weld Bed Area (A_{weld bed}) & Throat Thickness (t_throat). With our tool, you need to enter the respective value for Weld Bed Area & Throat Thickness and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Total length of weld?

In this formula, Total length of weld uses Weld Bed Area & Throat Thickness. We can use 3 other way(s) to calculate the same, which is/are as follows -

Total length of weld = Length of Top Weld+Length of Bottom Weld
Total length of weld = (Length of Top Weld*(Distance of top weld from gravity axis+Distance of Bottom Weld from Gravity Axis))/Distance of Bottom Weld from Gravity Axis
Total length of weld = (Length of Top Weld*(Distance of top weld from gravity axis+Distance of Bottom Weld from Gravity Axis))/Distance of top weld from gravity axis

Home

FREE PDFs

🔍 Search