Total Frictional Torque on Conical Pivot Bearing Considering Uniform Pressure Calculator

✖Coefficient of Friction(μ) is the ratio defining the force that resists the motion of one body in relation to another body in contact with it.ⓘ Coefficient of Friction [μ_f]			+10% -10%
✖Load Transmitted Over Bearing Surface is the weight of load to be lifted.ⓘ Load Transmitted Over Bearing Surface [W_t]			+10% -10%
✖Shaft Diameter is the diameter of the shaft of the pile.ⓘ Shaft Diameter [D_s]			+10% -10%
✖Semi Angle of Cone is the semi-vertical angle formed by the cone.ⓘ Semi Angle of Cone [α]			+10% -10%

✖Total Torque is the measure of the force that can cause an object to rotate about an axis. Force is what causes an object to accelerate in linear kinematics.ⓘ Total Frictional Torque on Conical Pivot Bearing Considering Uniform Pressure [T]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Friction Devices Formulas PDF PDF Image

Total Frictional Torque on Conical Pivot Bearing Considering Uniform Pressure Solution

STEP 0: Pre-Calculation Summary

Formula Used

Total Torque = Coefficient of Friction*Load Transmitted Over Bearing Surface*Shaft Diameter*cosec(Semi Angle of Cone)/3
T = μ_f*W_t*D_s*cosec(α)/3
This formula uses 2 Functions, 5 Variables

Functions Used

sec - Secant is a trigonometric function that is defined ratio of the hypotenuse to the shorter side adjacent to an acute angle (in a right-angled triangle); the reciprocal of a cosine., sec(Angle)
cosec - The cosecant function is a trigonometric function that is the reciprocal of the sine function., cosec(Angle)

Variables Used

Total Torque - (Measured in Newton Meter) - Total Torque is the measure of the force that can cause an object to rotate about an axis. Force is what causes an object to accelerate in linear kinematics.
Coefficient of Friction - Coefficient of Friction(μ) is the ratio defining the force that resists the motion of one body in relation to another body in contact with it.
Load Transmitted Over Bearing Surface - (Measured in Newton) - Load Transmitted Over Bearing Surface is the weight of load to be lifted.
Shaft Diameter - (Measured in Meter) - Shaft Diameter is the diameter of the shaft of the pile.
Semi Angle of Cone - (Measured in Radian) - Semi Angle of Cone is the semi-vertical angle formed by the cone.

STEP 1: Convert Input(s) to Base Unit

Coefficient of Friction: 0.4 --> No Conversion Required
Load Transmitted Over Bearing Surface: 24 Newton --> 24 Newton No Conversion Required
Shaft Diameter: 0.5 Meter --> 0.5 Meter No Conversion Required
Semi Angle of Cone: 30.286549 Degree --> 0.528599999116497 Radian (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

T = μ_f*W_t*D_s*cosec(α)/3 --> 0.4*24*0.5*cosec(0.528599999116497)/3

Evaluating ... ...

T = 3.17255791014307

STEP 3: Convert Result to Output's Unit

3.17255791014307 Newton Meter --> No Conversion Required

FINAL ANSWER

3.17255791014307 ≈ 3.172558 Newton Meter <-- Total Torque

(Calculation completed in 00.040 seconds)

You are here -

Home » Physics » Theory of Machine » Friction Devices » Mechanical » Pivot Bearing » Total Frictional Torque on Conical Pivot Bearing Considering Uniform Pressure

Credits

Created by Anshika Arya

National Institute Of Technology (NIT), Hamirpur

Anshika Arya has created this Calculator and 2000+ more calculators!

Verified by Team Softusvista

Softusvista Office (Pune), India

Team Softusvista has verified this Calculator and 1100+ more calculators!

< Pivot Bearing Calculators

Total Frictional Torque on Conical Pivot Bearing Considering Uniform Pressure

LaTeX Go Total Torque = Coefficient of Friction*Load Transmitted Over Bearing Surface*Shaft Diameter*cosec(Semi Angle of Cone)/3

Frictional Torque on Conical Pivot Bearing by Uniform Pressure

LaTeX Go Total Torque = (Coefficient of Friction*Load Transmitted Over Bearing Surface*Shaft Diameter*Slant Height)/3

Total Frictional Torque on Flat Pivot Bearing Considering Uniform Wear

LaTeX Go Total Torque = (Coefficient of Friction*Load Transmitted Over Bearing Surface*Radius of Bearing Surface)/2

Total Frictional Torque on Conical Pivot Bearing Considering Uniform Wear when Slant Height of Cone

LaTeX Go Total Torque = (Coefficient of Friction*Load Transmitted Over Bearing Surface*Slant Height)/2

Total Frictional Torque on Conical Pivot Bearing Considering Uniform Pressure Formula

LaTeX Go

Total Torque = Coefficient of Friction*Load Transmitted Over Bearing Surface*Shaft Diameter*cosec(Semi Angle of Cone)/3
T = μ_f*W_t*D_s*cosec(α)/3

What is pivot bearing?

Pivot bearings are frictionless bearings that are suitable for pivotal, angular, or oscillating applications. A cantilevered pivot bearing is a commonly used type of pivot bearing for applications such as: gimbal rings. mirror mounts. four bar linkages.

How to Calculate Total Frictional Torque on Conical Pivot Bearing Considering Uniform Pressure?

Total Frictional Torque on Conical Pivot Bearing Considering Uniform Pressure calculator uses Total Torque = Coefficient of Friction*Load Transmitted Over Bearing Surface*Shaft Diameter*cosec(Semi Angle of Cone)/3 to calculate the Total Torque, Total Frictional Torque on Conical Pivot Bearing Considering Uniform Pressure is the torque needed to overcome friction along the conical surface, considering the pressure distribution, bearing geometry, and coefficient of friction. Total Torque is denoted by T symbol.

How to calculate Total Frictional Torque on Conical Pivot Bearing Considering Uniform Pressure using this online calculator? To use this online calculator for Total Frictional Torque on Conical Pivot Bearing Considering Uniform Pressure, enter Coefficient of Friction (μ_f), Load Transmitted Over Bearing Surface (W_t), Shaft Diameter (D_s) & Semi Angle of Cone (α) and hit the calculate button. Here is how the Total Frictional Torque on Conical Pivot Bearing Considering Uniform Pressure calculation can be explained with given input values -> 3.172558 = 0.4*24*0.5*cosec(0.528599999116497)/3.

FAQ

What is Total Frictional Torque on Conical Pivot Bearing Considering Uniform Pressure?

Total Frictional Torque on Conical Pivot Bearing Considering Uniform Pressure is the torque needed to overcome friction along the conical surface, considering the pressure distribution, bearing geometry, and coefficient of friction and is represented as T = μ_f*W_t*D_s*cosec(α)/3 or Total Torque = Coefficient of Friction*Load Transmitted Over Bearing Surface*Shaft Diameter*cosec(Semi Angle of Cone)/3. Coefficient of Friction(μ) is the ratio defining the force that resists the motion of one body in relation to another body in contact with it, Load Transmitted Over Bearing Surface is the weight of load to be lifted, Shaft Diameter is the diameter of the shaft of the pile & Semi Angle of Cone is the semi-vertical angle formed by the cone.

How to calculate Total Frictional Torque on Conical Pivot Bearing Considering Uniform Pressure?

Total Frictional Torque on Conical Pivot Bearing Considering Uniform Pressure is the torque needed to overcome friction along the conical surface, considering the pressure distribution, bearing geometry, and coefficient of friction is calculated using Total Torque = Coefficient of Friction*Load Transmitted Over Bearing Surface*Shaft Diameter*cosec(Semi Angle of Cone)/3. To calculate Total Frictional Torque on Conical Pivot Bearing Considering Uniform Pressure, you need Coefficient of Friction (μ_f), Load Transmitted Over Bearing Surface (W_t), Shaft Diameter (D_s) & Semi Angle of Cone (α). With our tool, you need to enter the respective value for Coefficient of Friction, Load Transmitted Over Bearing Surface, Shaft Diameter & Semi Angle of Cone and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Total Torque?

In this formula, Total Torque uses Coefficient of Friction, Load Transmitted Over Bearing Surface, Shaft Diameter & Semi Angle of Cone. We can use 3 other way(s) to calculate the same, which is/are as follows -

Total Torque = (Coefficient of Friction*Load Transmitted Over Bearing Surface*Shaft Diameter*Slant Height)/3
Total Torque = (Coefficient of Friction*Load Transmitted Over Bearing Surface*Slant Height)/2
Total Torque = (Coefficient of Friction*Load Transmitted Over Bearing Surface*Radius of Bearing Surface)/2

Home

FREE PDFs

🔍 Search