Total Energy per unit Weight of Water in Flow Section Calculator

✖Mean velocity is defined as the average velocity of a fluid at a point and over an arbitrary time T.ⓘ Mean Velocity [V_mean]			+10% -10%
✖Depth of Flow is the distance from the top or surface of the flow to the bottom of a channel or other waterway or Depth of Flow at the Vertical while measuring Sound Weights.ⓘ Depth of Flow [d_f]			+10% -10%
✖Height above datum is the elevation from surface of zero elevation to which heights of various points are referenced.ⓘ Height above Datum [y]			+10% -10%

✖Total Energy is the sum of the kinetic energy and the potential energy of the system under consideration.ⓘ Total Energy per unit Weight of Water in Flow Section [E_total]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Specific Energy and Critical Depth Formulas PDF PDF Image

Total Energy per unit Weight of Water in Flow Section Solution

STEP 0: Pre-Calculation Summary

Formula Used

Total Energy = ((Mean Velocity^2)/(2*[g]))+Depth of Flow+Height above Datum
E_total = ((V_mean^2)/(2*[g]))+d_f+y
This formula uses 1 Constants, 4 Variables

Constants Used

[g] - Gravitational acceleration on Earth Value Taken As 9.80665

Variables Used

Total Energy - (Measured in Joule) - Total Energy is the sum of the kinetic energy and the potential energy of the system under consideration.
Mean Velocity - (Measured in Meter per Second) - Mean velocity is defined as the average velocity of a fluid at a point and over an arbitrary time T.
Depth of Flow - (Measured in Meter) - Depth of Flow is the distance from the top or surface of the flow to the bottom of a channel or other waterway or Depth of Flow at the Vertical while measuring Sound Weights.
Height above Datum - (Measured in Meter) - Height above datum is the elevation from surface of zero elevation to which heights of various points are referenced.

STEP 1: Convert Input(s) to Base Unit

Mean Velocity: 10.1 Meter per Second --> 10.1 Meter per Second No Conversion Required
Depth of Flow: 3.3 Meter --> 3.3 Meter No Conversion Required
Height above Datum: 40 Millimeter --> 0.04 Meter (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

E_total = ((V_mean^2)/(2*[g]))+d_f+y --> ((10.1^2)/(2*[g]))+3.3+0.04

Evaluating ... ...

E_total = 8.54106254429392

STEP 3: Convert Result to Output's Unit

8.54106254429392 Joule --> No Conversion Required

FINAL ANSWER

8.54106254429392 ≈ 8.541063 Joule <-- Total Energy

(Calculation completed in 00.020 seconds)

You are here -

Home » Engineering » Civil » Hydraulics and Waterworks » Flow in Open Channels » Specific Energy and Critical Depth » Total Energy per unit Weight of Water in Flow Section

Credits

Created by Rithik Agrawal

National Institute of Technology Karnataka (NITK), Surathkal

Rithik Agrawal has created this Calculator and 1300+ more calculators!

Verified by Ishita Goyal

Meerut Institute of Engineering and Technology (MIET), Meerut

Ishita Goyal has verified this Calculator and 2600+ more calculators!

< Specific Energy and Critical Depth Calculators

Mean Velocity of Flow for Total Energy per Unit Weight of Water in Flow Section

LaTeX Go Mean Velocity = sqrt((Total Energy-(Depth of Flow+Height above Datum))*2*[g])

Depth of Flow given Total Energy per Unit Weight of Water in Flow Section

LaTeX Go Depth of Flow = Total Energy-(((Mean Velocity^2)/(2*[g]))+Height above Datum)

Datum Height for Total Energy per unit Weight of Water in Flow Section

LaTeX Go Height above Datum = Total Energy-(((Mean Velocity^2)/(2*[g]))+Depth of Flow)

Total Energy per unit Weight of Water in Flow Section

LaTeX Go Total Energy = ((Mean Velocity^2)/(2*[g]))+Depth of Flow+Height above Datum

Total Energy per unit Weight of Water in Flow Section Formula

LaTeX Go

Total Energy = ((Mean Velocity^2)/(2*[g]))+Depth of Flow+Height above Datum
E_total = ((V_mean^2)/(2*[g]))+d_f+y

What is Specific Energy in Channel?

In open channel flow, specific energy ( e ) is the energy length, or head, relative to the channel bottom. It is also the fundamental relationship used in the standard step method to calculate how the depth of a flow changes over a reach from the energy gained or lost due to the slope of the channel.

How to Calculate Total Energy per unit Weight of Water in Flow Section?

Total Energy per unit Weight of Water in Flow Section calculator uses Total Energy = ((Mean Velocity^2)/(2*[g]))+Depth of Flow+Height above Datum to calculate the Total Energy, The Total Energy per unit Weight of Water in Flow Section is defined as the sum of kinetic and potential energy stored in flowing water in channel. Total Energy is denoted by E_total symbol.

How to calculate Total Energy per unit Weight of Water in Flow Section using this online calculator? To use this online calculator for Total Energy per unit Weight of Water in Flow Section, enter Mean Velocity (V_mean), Depth of Flow (d_f) & Height above Datum (y) and hit the calculate button. Here is how the Total Energy per unit Weight of Water in Flow Section calculation can be explained with given input values -> 8.541063 = ((10.1^2)/(2*[g]))+3.3+0.04.

FAQ

What is Total Energy per unit Weight of Water in Flow Section?

The Total Energy per unit Weight of Water in Flow Section is defined as the sum of kinetic and potential energy stored in flowing water in channel and is represented as E_total = ((V_mean^2)/(2*[g]))+d_f+y or Total Energy = ((Mean Velocity^2)/(2*[g]))+Depth of Flow+Height above Datum. Mean velocity is defined as the average velocity of a fluid at a point and over an arbitrary time T, Depth of Flow is the distance from the top or surface of the flow to the bottom of a channel or other waterway or Depth of Flow at the Vertical while measuring Sound Weights & Height above datum is the elevation from surface of zero elevation to which heights of various points are referenced.

How to calculate Total Energy per unit Weight of Water in Flow Section?

The Total Energy per unit Weight of Water in Flow Section is defined as the sum of kinetic and potential energy stored in flowing water in channel is calculated using Total Energy = ((Mean Velocity^2)/(2*[g]))+Depth of Flow+Height above Datum. To calculate Total Energy per unit Weight of Water in Flow Section, you need Mean Velocity (V_mean), Depth of Flow (d_f) & Height above Datum (y). With our tool, you need to enter the respective value for Mean Velocity, Depth of Flow & Height above Datum and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Total Energy?

In this formula, Total Energy uses Mean Velocity, Depth of Flow & Height above Datum. We can use 2 other way(s) to calculate the same, which is/are as follows -

Total Energy = ((Mean Velocity for Froude Number^2)/(2*[g]))+Depth of Flow
Total Energy = Depth of Flow+(((Discharge of Channel/Cross-Sectional Area of Channel)^2)/(2*[g]))

Home

FREE PDFs

🔍 Search