Total Drawdown in Pumping Well expressed given Factors related to Hydraulic Characteristics Calculator

✖Factors related to Hydraulic Characteristics of the aquifer and the length of the pumping period.ⓘ Factors related to Hydraulic Characteristics [B]			+10% -10%
✖The Pumping Rate is referred as volume of water (or other fluid) that is pumped per unit of time. It’s typically measured in units like liters per second (L/s) or cubic meters per hour (m³/h).ⓘ Pumping Rate [q]			+10% -10%
✖Factors related to Characteristics of the Well.ⓘ Factors related to Characteristics of the Well [C]			+10% -10%

✖Total Drawdown is the reduction in hydraulic head observed at a well in an aquifer, typically due to pumping a well as part of an aquifer test or well test.ⓘ Total Drawdown in Pumping Well expressed given Factors related to Hydraulic Characteristics [s_t]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Engineering Hydrology Formula PDF PDF Image

Total Drawdown in Pumping Well expressed given Factors related to Hydraulic Characteristics Solution

STEP 0: Pre-Calculation Summary

Formula Used

Total Drawdown = Factors related to Hydraulic Characteristics*Pumping Rate+(Factors related to Characteristics of the Well*Pumping Rate^2)
s_t = B*q+(C*q^2)
This formula uses 4 Variables

Variables Used

Total Drawdown - (Measured in Meter) - Total Drawdown is the reduction in hydraulic head observed at a well in an aquifer, typically due to pumping a well as part of an aquifer test or well test.
Factors related to Hydraulic Characteristics - Factors related to Hydraulic Characteristics of the aquifer and the length of the pumping period.
Pumping Rate - (Measured in Cubic Meter per Second) - The Pumping Rate is referred as volume of water (or other fluid) that is pumped per unit of time. It’s typically measured in units like liters per second (L/s) or cubic meters per hour (m³/h).
Factors related to Characteristics of the Well - Factors related to Characteristics of the Well.

STEP 1: Convert Input(s) to Base Unit

Factors related to Hydraulic Characteristics: 0.17 --> No Conversion Required
Pumping Rate: 7 Cubic Meter per Second --> 7 Cubic Meter per Second No Conversion Required
Factors related to Characteristics of the Well: 0.08 --> No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

s_t = B*q+(C*q^2) --> 0.17*7+(0.08*7^2)

Evaluating ... ...

s_t = 5.11

STEP 3: Convert Result to Output's Unit

5.11 Meter --> No Conversion Required

FINAL ANSWER

5.11 Meter <-- Total Drawdown

(Calculation completed in 00.020 seconds)

You are here -

Home » Engineering » Civil » Engineering Hydrology » Groundwater Hydrology » Single Well Tests » Total Drawdown in Pumping Well expressed given Factors related to Hydraulic Characteristics

Credits

Created by Mithila Muthamma PA

Coorg Institute of Technology (CIT), Coorg

Mithila Muthamma PA has created this Calculator and 2000+ more calculators!

Verified by Chandana P Dev

NSS College of Engineering (NSSCE), Palakkad

Chandana P Dev has verified this Calculator and 1700+ more calculators!

< Single Well Tests Calculators

Total Drawdown in Pumping Well expressed given Factors related to Hydraulic Characteristics

LaTeX Go Total Drawdown = Factors related to Hydraulic Characteristics*Pumping Rate+(Factors related to Characteristics of the Well*Pumping Rate^2)

Drawdown in aquifer for total drawdown

LaTeX Go Change in Drawdown = Total Drawdown-Well loss

Total Drawdown in Pumping Well

LaTeX Go Total Drawdown = Change in Drawdown+Well loss

Well Loss for Total Drawdown

LaTeX Go Well loss = Total Drawdown-Change in Drawdown

Total Drawdown in Pumping Well expressed given Factors related to Hydraulic Characteristics Formula

LaTeX Go

Total Drawdown = Factors related to Hydraulic Characteristics*Pumping Rate+(Factors related to Characteristics of the Well*Pumping Rate^2)
s_t = B*q+(C*q^2)

What is Pumping Well?

A Pumping Well is a well in which pumping is required to increase the formation pressure to allow the free production flow. It is the opposite of a naturally flowing well because in such type of a well an external device such as a reciprocating pump is used to force the liquid to move out of the well.

How to Calculate Total Drawdown in Pumping Well expressed given Factors related to Hydraulic Characteristics?

Total Drawdown in Pumping Well expressed given Factors related to Hydraulic Characteristics calculator uses Total Drawdown = Factors related to Hydraulic Characteristics*Pumping Rate+(Factors related to Characteristics of the Well*Pumping Rate^2) to calculate the Total Drawdown, The Total Drawdown in Pumping Well expressed given Factors related to Hydraulic Characteristics is measured as the difference between the initial level of water in a well before pumping, and the static, or stabilized, level of water after a long period of pumping. Total Drawdown is denoted by s_t symbol.

How to calculate Total Drawdown in Pumping Well expressed given Factors related to Hydraulic Characteristics using this online calculator? To use this online calculator for Total Drawdown in Pumping Well expressed given Factors related to Hydraulic Characteristics, enter Factors related to Hydraulic Characteristics (B), Pumping Rate (q) & Factors related to Characteristics of the Well (C) and hit the calculate button. Here is how the Total Drawdown in Pumping Well expressed given Factors related to Hydraulic Characteristics calculation can be explained with given input values -> 5.11 = 0.17*7+(0.08*7^2).

FAQ

What is Total Drawdown in Pumping Well expressed given Factors related to Hydraulic Characteristics?

The Total Drawdown in Pumping Well expressed given Factors related to Hydraulic Characteristics is measured as the difference between the initial level of water in a well before pumping, and the static, or stabilized, level of water after a long period of pumping and is represented as s_t = B*q+(C*q^2) or Total Drawdown = Factors related to Hydraulic Characteristics*Pumping Rate+(Factors related to Characteristics of the Well*Pumping Rate^2). Factors related to Hydraulic Characteristics of the aquifer and the length of the pumping period, The Pumping Rate is referred as volume of water (or other fluid) that is pumped per unit of time. It’s typically measured in units like liters per second (L/s) or cubic meters per hour (m³/h) & Factors related to Characteristics of the Well.

How to calculate Total Drawdown in Pumping Well expressed given Factors related to Hydraulic Characteristics?

The Total Drawdown in Pumping Well expressed given Factors related to Hydraulic Characteristics is measured as the difference between the initial level of water in a well before pumping, and the static, or stabilized, level of water after a long period of pumping is calculated using Total Drawdown = Factors related to Hydraulic Characteristics*Pumping Rate+(Factors related to Characteristics of the Well*Pumping Rate^2). To calculate Total Drawdown in Pumping Well expressed given Factors related to Hydraulic Characteristics, you need Factors related to Hydraulic Characteristics (B), Pumping Rate (q) & Factors related to Characteristics of the Well (C). With our tool, you need to enter the respective value for Factors related to Hydraulic Characteristics, Pumping Rate & Factors related to Characteristics of the Well and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Total Drawdown?

In this formula, Total Drawdown uses Factors related to Hydraulic Characteristics, Pumping Rate & Factors related to Characteristics of the Well. We can use 1 other way(s) to calculate the same, which is/are as follows -

Total Drawdown = Change in Drawdown+Well loss

Home

FREE PDFs

🔍 Search