Total Angle of Twist for Shaft Solution

STEP 0: Pre-Calculation Summary
Formula Used
Angle of twist = (32*Torque Exerted on Wheel*Length of Shaft*(1/(Diameter of shaft at left end^3)-1/(Diameter of shaft at right end^3)))/(pi*Modulus of rigidity of Shaft*(Diameter of shaft at right end-Diameter of shaft at left end))
θ = (32*τ*L*(1/(D1^3)-1/(D2^3)))/(pi*G*(D2-D1))
This formula uses 1 Constants, 6 Variables
Constants Used
pi - Archimedes' constant Value Taken As 3.14159265358979323846264338327950288
Variables Used
Angle of twist - Angle of twist is the angle through which the fixed end of a shaft rotates with respect to the free end.
Torque Exerted on Wheel - (Measured in Newton Meter) - Torque Exerted on Wheel is described as the turning effect of force on the axis of rotation. In brief, it is a moment of force. It is characterized by τ.
Length of Shaft - (Measured in Meter) - The Length of Shaft is the distance between two ends of shaft.
Diameter of shaft at left end - (Measured in Meter) - Diameter of shaft at left end is the shorter side diameter of tapering shaft.
Diameter of shaft at right end - (Measured in Meter) - Diameter of shaft at right end is the longer side diameter of tapering shaft.
Modulus of rigidity of Shaft - (Measured in Pascal) - Modulus of rigidity of Shaft is the elastic coefficient when a shear force is applied resulting in lateral deformation. It gives us a measure of how rigid a body is.
STEP 1: Convert Input(s) to Base Unit
Torque Exerted on Wheel: 50 Newton Meter --> 50 Newton Meter No Conversion Required
Length of Shaft: 7000 Millimeter --> 7 Meter (Check conversion ​here)
Diameter of shaft at left end: 3000 Millimeter --> 3 Meter (Check conversion ​here)
Diameter of shaft at right end: 5000 Millimeter --> 5 Meter (Check conversion ​here)
Modulus of rigidity of Shaft: 4E-05 Megapascal --> 40 Pascal (Check conversion ​here)
STEP 2: Evaluate Formula
Substituting Input Values in Formula
θ = (32*τ*L*(1/(D1^3)-1/(D2^3)))/(pi*G*(D2-D1)) --> (32*50*7*(1/(3^3)-1/(5^3)))/(pi*40*(5-3))
Evaluating ... ...
θ = 1.29398863361233
STEP 3: Convert Result to Output's Unit
1.29398863361233 --> No Conversion Required
FINAL ANSWER
1.29398863361233 1.293989 <-- Angle of twist
(Calculation completed in 00.004 seconds)

Credits

Creator Image
Created by Anshika Arya
National Institute Of Technology (NIT), Hamirpur
Anshika Arya has created this Calculator and 2000+ more calculators!
Verifier Image
Verified by Payal Priya
Birsa Institute of Technology (BIT), Sindri
Payal Priya has verified this Calculator and 1900+ more calculators!

Torsion of Tapering Shafts Calculators

Total Angle of Twist for Shaft
​ LaTeX ​ Go Angle of twist = (32*Torque Exerted on Wheel*Length of Shaft*(1/(Diameter of shaft at left end^3)-1/(Diameter of shaft at right end^3)))/(pi*Modulus of rigidity of Shaft*(Diameter of shaft at right end-Diameter of shaft at left end))
Shear Stress on Left Surface of Shaft
​ LaTeX ​ Go Shear stress on surface of shaft = (16*Torque Exerted on Wheel)/(pi*Diameter of Shaft)
Diameter of Shaft at Left End
​ LaTeX ​ Go Diameter of Shaft = (16*Torque Exerted on Wheel)/(Shear stress on surface of shaft*pi)
Torque on Tapering Shaft
​ LaTeX ​ Go Torque Exerted on Wheel = (Shear stress on surface of shaft*pi*Diameter of Shaft)/16

Total Angle of Twist for Shaft Formula

​LaTeX ​Go
Angle of twist = (32*Torque Exerted on Wheel*Length of Shaft*(1/(Diameter of shaft at left end^3)-1/(Diameter of shaft at right end^3)))/(pi*Modulus of rigidity of Shaft*(Diameter of shaft at right end-Diameter of shaft at left end))
θ = (32*τ*L*(1/(D1^3)-1/(D2^3)))/(pi*G*(D2-D1))

What is angle of twist and angle of shear?

The angle of shear is given by the angle of the deformation that comes up on the sides when deformation force or shearing stress is exerted on an object. The angle of twist is given as the angle along with which an element of a rotating machine rotates or twists w.r.t its free end.

How to Calculate Total Angle of Twist for Shaft?

Total Angle of Twist for Shaft calculator uses Angle of twist = (32*Torque Exerted on Wheel*Length of Shaft*(1/(Diameter of shaft at left end^3)-1/(Diameter of shaft at right end^3)))/(pi*Modulus of rigidity of Shaft*(Diameter of shaft at right end-Diameter of shaft at left end)) to calculate the Angle of twist, Total angle of twist for shaft is the angle through which the fixed end of a shaft rotates with respect to the free end. Angle of twist is denoted by θ symbol.

How to calculate Total Angle of Twist for Shaft using this online calculator? To use this online calculator for Total Angle of Twist for Shaft, enter Torque Exerted on Wheel (τ), Length of Shaft (L), Diameter of shaft at left end (D1), Diameter of shaft at right end (D2) & Modulus of rigidity of Shaft (G) and hit the calculate button. Here is how the Total Angle of Twist for Shaft calculation can be explained with given input values -> 1.293989 = (32*50*7*(1/(3^3)-1/(5^3)))/(pi*40*(5-3)).

FAQ

What is Total Angle of Twist for Shaft?
Total angle of twist for shaft is the angle through which the fixed end of a shaft rotates with respect to the free end and is represented as θ = (32*τ*L*(1/(D1^3)-1/(D2^3)))/(pi*G*(D2-D1)) or Angle of twist = (32*Torque Exerted on Wheel*Length of Shaft*(1/(Diameter of shaft at left end^3)-1/(Diameter of shaft at right end^3)))/(pi*Modulus of rigidity of Shaft*(Diameter of shaft at right end-Diameter of shaft at left end)). Torque Exerted on Wheel is described as the turning effect of force on the axis of rotation. In brief, it is a moment of force. It is characterized by τ, The Length of Shaft is the distance between two ends of shaft, Diameter of shaft at left end is the shorter side diameter of tapering shaft, Diameter of shaft at right end is the longer side diameter of tapering shaft & Modulus of rigidity of Shaft is the elastic coefficient when a shear force is applied resulting in lateral deformation. It gives us a measure of how rigid a body is.
How to calculate Total Angle of Twist for Shaft?
Total angle of twist for shaft is the angle through which the fixed end of a shaft rotates with respect to the free end is calculated using Angle of twist = (32*Torque Exerted on Wheel*Length of Shaft*(1/(Diameter of shaft at left end^3)-1/(Diameter of shaft at right end^3)))/(pi*Modulus of rigidity of Shaft*(Diameter of shaft at right end-Diameter of shaft at left end)). To calculate Total Angle of Twist for Shaft, you need Torque Exerted on Wheel (τ), Length of Shaft (L), Diameter of shaft at left end (D1), Diameter of shaft at right end (D2) & Modulus of rigidity of Shaft (G). With our tool, you need to enter the respective value for Torque Exerted on Wheel, Length of Shaft, Diameter of shaft at left end, Diameter of shaft at right end & Modulus of rigidity of Shaft and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!