Tortuosity Coefficient using Thickness and Diameter of Disks Calculator

Chemistry Engineering Financial Health More >>

↳

Nanomaterials and Nanochemistry Analytical chemistry Atmospheric Chemistry Atomic structure More >>

⤿

Nanocomposites The End of Compromise Electronic Structure in Clusters and Nanoparticles Magnetism in Nanomaterials Mechanical and Nanomechanical Properties More >>

✖The Diameter of Disks is any straight line segment that passes through the centre of the disk and whose endpoints lie on the disk.ⓘ Diameter of Disks [L]			+10% -10%
✖The Volume Fraction of Filler is the volume of a constituent divided by the volume of all constituents of the mixture prior to mixing.ⓘ Volume Fraction of Filler [Φ]			+10% -10%
✖The Thickness of Disks is the dimension between two surfaces of the disks, usually the dimension of smallest measure.ⓘ Thickness of Disks [e]			+10% -10%

✖Tortuosity Coefficient is an intrinsic property of a porous material usually defined as the ratio of actual flow path length to the straight distance between the ends of the flow path.ⓘ Tortuosity Coefficient using Thickness and Diameter of Disks [ζ]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Chemistry Formula PDF PDF Image

Tortuosity Coefficient using Thickness and Diameter of Disks Solution

STEP 0: Pre-Calculation Summary

Formula Used

Tortuosity Coefficient = 1+(Diameter of Disks*Volume Fraction of Filler)/Thickness of Disks
ζ = 1+(L*Φ)/e
This formula uses 4 Variables

Variables Used

Tortuosity Coefficient - Tortuosity Coefficient is an intrinsic property of a porous material usually defined as the ratio of actual flow path length to the straight distance between the ends of the flow path.
Diameter of Disks - (Measured in Meter) - The Diameter of Disks is any straight line segment that passes through the centre of the disk and whose endpoints lie on the disk.
Volume Fraction of Filler - The Volume Fraction of Filler is the volume of a constituent divided by the volume of all constituents of the mixture prior to mixing.
Thickness of Disks - (Measured in Meter) - The Thickness of Disks is the dimension between two surfaces of the disks, usually the dimension of smallest measure.

STEP 1: Convert Input(s) to Base Unit

Diameter of Disks: 100 Nanometer --> 1E-07 Meter (Check conversion here)
Volume Fraction of Filler: 0.5 --> No Conversion Required
Thickness of Disks: 60 Nanometer --> 6E-08 Meter (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

ζ = 1+(L*Φ)/e --> 1+(1E-07*0.5)/6E-08

Evaluating ... ...

ζ = 1.83333333333333

STEP 3: Convert Result to Output's Unit

1.83333333333333 --> No Conversion Required

FINAL ANSWER

1.83333333333333 ≈ 1.833333 <-- Tortuosity Coefficient

(Calculation completed in 00.004 seconds)

You are here -

Home » Chemistry » Nanomaterials and Nanochemistry » Nanocomposites The End of Compromise » Tortuosity Coefficient using Thickness and Diameter of Disks

Credits

Created by Abhijit gharphalia

national institute of technology meghalaya (NIT Meghalaya), Shillong

Abhijit gharphalia has created this Calculator and 50+ more calculators!

Verified by Soupayan banerjee

National University of Judicial Science (NUJS), Kolkata

Soupayan banerjee has verified this Calculator and 900+ more calculators!

< Nanocomposites The End of Compromise Calculators

Diffusion Coefficient of Solute in Polymer Matrix given Volume Fraction

LaTeX Go Diffusion Coefficient of Solute in Polymer Matrix = (Diffusion Coefficient of Solute in Composite*Tortuosity Coefficient)/(1-Volume Fraction of Filler)

Diffusion Coefficient of Solute in Composite given Volume Fraction

LaTeX Go Diffusion Coefficient of Solute in Composite = (Diffusion Coefficient of Solute in Polymer Matrix*(1-Volume Fraction of Filler))/Tortuosity Coefficient

Tortuosity Coefficient using Diffusion Coefficient of Solute

LaTeX Go Tortuosity Coefficient = (Diffusion Coefficient of Solute in Polymer Matrix*(1-Volume Fraction of Filler))/Diffusion Coefficient of Solute in Composite

Tortuosity Coefficient using Thickness and Diameter of Disks

LaTeX Go Tortuosity Coefficient = 1+(Diameter of Disks*Volume Fraction of Filler)/Thickness of Disks

Tortuosity Coefficient using Thickness and Diameter of Disks Formula

LaTeX Go

Tortuosity Coefficient = 1+(Diameter of Disks*Volume Fraction of Filler)/Thickness of Disks
ζ = 1+(L*Φ)/e

What is Tortuosity?

Tortuosity is a ratio that characterizes the convoluted pathways of fluid diffusion and electrical conduction through porous media.

How to Calculate Tortuosity Coefficient using Thickness and Diameter of Disks?

Tortuosity Coefficient using Thickness and Diameter of Disks calculator uses Tortuosity Coefficient = 1+(Diameter of Disks*Volume Fraction of Filler)/Thickness of Disks to calculate the Tortuosity Coefficient, The Tortuosity Coefficient using Thickness and Diameter of Disks formula is defined as an intrinsic property of a porous material usually defined as the ratio of actual flow path length to the straight distance between the ends of the flow path. Tortuosity Coefficient is denoted by ζ symbol.

How to calculate Tortuosity Coefficient using Thickness and Diameter of Disks using this online calculator? To use this online calculator for Tortuosity Coefficient using Thickness and Diameter of Disks, enter Diameter of Disks (L), Volume Fraction of Filler (Φ) & Thickness of Disks (e) and hit the calculate button. Here is how the Tortuosity Coefficient using Thickness and Diameter of Disks calculation can be explained with given input values -> 1.833333 = 1+(1E-07*0.5)/6E-08.

FAQ

What is Tortuosity Coefficient using Thickness and Diameter of Disks?

The Tortuosity Coefficient using Thickness and Diameter of Disks formula is defined as an intrinsic property of a porous material usually defined as the ratio of actual flow path length to the straight distance between the ends of the flow path and is represented as ζ = 1+(L*Φ)/e or Tortuosity Coefficient = 1+(Diameter of Disks*Volume Fraction of Filler)/Thickness of Disks. The Diameter of Disks is any straight line segment that passes through the centre of the disk and whose endpoints lie on the disk, The Volume Fraction of Filler is the volume of a constituent divided by the volume of all constituents of the mixture prior to mixing & The Thickness of Disks is the dimension between two surfaces of the disks, usually the dimension of smallest measure.

How to calculate Tortuosity Coefficient using Thickness and Diameter of Disks?

The Tortuosity Coefficient using Thickness and Diameter of Disks formula is defined as an intrinsic property of a porous material usually defined as the ratio of actual flow path length to the straight distance between the ends of the flow path is calculated using Tortuosity Coefficient = 1+(Diameter of Disks*Volume Fraction of Filler)/Thickness of Disks. To calculate Tortuosity Coefficient using Thickness and Diameter of Disks, you need Diameter of Disks (L), Volume Fraction of Filler (Φ) & Thickness of Disks (e). With our tool, you need to enter the respective value for Diameter of Disks, Volume Fraction of Filler & Thickness of Disks and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Tortuosity Coefficient?

In this formula, Tortuosity Coefficient uses Diameter of Disks, Volume Fraction of Filler & Thickness of Disks. We can use 1 other way(s) to calculate the same, which is/are as follows -

Tortuosity Coefficient = (Diffusion Coefficient of Solute in Polymer Matrix*(1-Volume Fraction of Filler))/Diffusion Coefficient of Solute in Composite

Home

FREE PDFs

🔍 Search