HCF of two numbers

Torque Transmitted by n Friction Surfaces Calculator

Physics Chemistry Engineering Financial More >>

↳

Mechanical Aerospace Basic Physics Others and Extra

⤿

Automobile Design of Automobile Elements Design of Machine Elements Fluid Mechanics More >>

⤿

Driveline Front Axle and Steering Race Car Vehicle Dynamics Suspension Geometry More >>

✖Number of Friction Discs is the total number of friction discs that constitute a clutch.ⓘ Number of Friction Discs [n]			+10% -10%
✖Coefficient of Friction Disc is a dimensionless number that is defined as the ratio between friction force and normal force.ⓘ Coefficient of Friction Disc [μ]			+10% -10%
✖Total Axial Load is the force that is acting on the clutch during torque transmission.ⓘ Total Axial Load [F_a]			+10% -10%
✖Mean Diameter of Friction Disc is the average of outer and inner diametr of the friction disc.ⓘ Mean Diameter of Friction Disc [D_m]			+10% -10%

✖Torque Transmitted is the torque transmitted by the friction disc during operation.ⓘ Torque Transmitted by n Friction Surfaces [T_T]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Driveline Formulas PDF PDF Image

Torque Transmitted by n Friction Surfaces Solution

STEP 0: Pre-Calculation Summary

Formula Used

Torque Transmitted = (Number of Friction Discs*Coefficient of Friction Disc*Total Axial Load*Mean Diameter of Friction Disc)/2
T_T = (n*μ*F_a*D_m)/2
This formula uses 5 Variables

Variables Used

Torque Transmitted - (Measured in Newton Meter) - Torque Transmitted is the torque transmitted by the friction disc during operation.
Number of Friction Discs - Number of Friction Discs is the total number of friction discs that constitute a clutch.
Coefficient of Friction Disc - Coefficient of Friction Disc is a dimensionless number that is defined as the ratio between friction force and normal force.
Total Axial Load - (Measured in Newton) - Total Axial Load is the force that is acting on the clutch during torque transmission.
Mean Diameter of Friction Disc - (Measured in Meter) - Mean Diameter of Friction Disc is the average of outer and inner diametr of the friction disc.

STEP 1: Convert Input(s) to Base Unit

Number of Friction Discs: 6 --> No Conversion Required
Coefficient of Friction Disc: 0.3 --> No Conversion Required
Total Axial Load: 9424.778 Newton --> 9424.778 Newton No Conversion Required
Mean Diameter of Friction Disc: 0.1 Meter --> 0.1 Meter No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

T_T = (n*μ*F_a*D_m)/2 --> (6*0.3*9424.778*0.1)/2

Evaluating ... ...

T_T = 848.23002

STEP 3: Convert Result to Output's Unit

848.23002 Newton Meter -->848230.02 Newton Millimeter (Check conversion here)

FINAL ANSWER

848230.02 ≈ 848230 Newton Millimeter <-- Torque Transmitted

(Calculation completed in 00.004 seconds)

You are here -

Home » Physics » Automobile » Mechanical » Driveline » Torque Transmitted by n Friction Surfaces

Credits

Created by Syed Adnan

Ramaiah University of Applied Sciences (RUAS), bangalore

Syed Adnan has created this Calculator and 200+ more calculators!

Verified by Anshika Arya

National Institute Of Technology (NIT), Hamirpur

Anshika Arya has verified this Calculator and 2500+ more calculators!

< Driveline Calculators

Angular Acceleration of Driven Shaft

LaTeX Go Angular Acceleration of Driven Shaft = -Angular Velocity of Driven Shaft^2*cos(Angle Between Driving And Driven Shafts)*sin(Angle Between Driving And Driven Shafts)^2*sin(2*Angle Rotated By Driven Shaft)/((1-cos(Angle Rotated By Driven Shaft)^2*sin(Angle Between Driving And Driven Shafts)^2)^2)

Velocity Ratio of Hooke's Joint

LaTeX Go Velocity Ratio = cos(Angle Between Driving And Driven Shafts)/(1-cos(Angle Rotated By Driving Shaft)^2*sin(Angle Between Driving And Driven Shafts)^2)

Axial Force of Multiplate Clutch using Uniform Wear Theory

LaTeX Go Total Axial Load = pi*Pressure of Intensity*Inner Diameter of Friction Disc*(Outer Diameter of Friction Disc-Inner Diameter of Friction Disc)*0.5

Gear Step

LaTeX Go Gear Step = Preceding Lower Gear Ratio Number/Gear Ratio Number

Torque Transmitted by n Friction Surfaces Formula

LaTeX Go

Torque Transmitted = (Number of Friction Discs*Coefficient of Friction Disc*Total Axial Load*Mean Diameter of Friction Disc)/2
T_T = (n*μ*F_a*D_m)/2

What is the torque that is transmitted by friction surfaces?

A multi-plate clutch is used where large torque is required to be transmitted. They have a number of pairs of contacting surfaces.

How to Calculate Torque Transmitted by n Friction Surfaces?

Torque Transmitted by n Friction Surfaces calculator uses Torque Transmitted = (Number of Friction Discs*Coefficient of Friction Disc*Total Axial Load*Mean Diameter of Friction Disc)/2 to calculate the Torque Transmitted, The Torque transmitted by n friction surfaces formula is defined as the torque that is transmitted to the gear box through the clutch. Torque Transmitted is denoted by T_T symbol.

How to calculate Torque Transmitted by n Friction Surfaces using this online calculator? To use this online calculator for Torque Transmitted by n Friction Surfaces, enter Number of Friction Discs (n), Coefficient of Friction Disc (μ), Total Axial Load (F_a) & Mean Diameter of Friction Disc (D_m) and hit the calculate button. Here is how the Torque Transmitted by n Friction Surfaces calculation can be explained with given input values -> 8.5E+8 = (6*0.3*9424.778*0.1)/2.

FAQ

What is Torque Transmitted by n Friction Surfaces?

The Torque transmitted by n friction surfaces formula is defined as the torque that is transmitted to the gear box through the clutch and is represented as T_T = (n*μ*F_a*D_m)/2 or Torque Transmitted = (Number of Friction Discs*Coefficient of Friction Disc*Total Axial Load*Mean Diameter of Friction Disc)/2. Number of Friction Discs is the total number of friction discs that constitute a clutch, Coefficient of Friction Disc is a dimensionless number that is defined as the ratio between friction force and normal force, Total Axial Load is the force that is acting on the clutch during torque transmission & Mean Diameter of Friction Disc is the average of outer and inner diametr of the friction disc.

How to calculate Torque Transmitted by n Friction Surfaces?

The Torque transmitted by n friction surfaces formula is defined as the torque that is transmitted to the gear box through the clutch is calculated using Torque Transmitted = (Number of Friction Discs*Coefficient of Friction Disc*Total Axial Load*Mean Diameter of Friction Disc)/2. To calculate Torque Transmitted by n Friction Surfaces, you need Number of Friction Discs (n), Coefficient of Friction Disc (μ), Total Axial Load (F_a) & Mean Diameter of Friction Disc (D_m). With our tool, you need to enter the respective value for Number of Friction Discs, Coefficient of Friction Disc, Total Axial Load & Mean Diameter of Friction Disc and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Torque Transmitted?

In this formula, Torque Transmitted uses Number of Friction Discs, Coefficient of Friction Disc, Total Axial Load & Mean Diameter of Friction Disc. We can use 1 other way(s) to calculate the same, which is/are as follows -

Torque Transmitted = 0.5*Number of Friction Discs*Coefficient of Friction Disc*Total Axial Load*Mean Diameter of Friction Disc

Home

FREE PDFs

🔍 Search