Torque Transmitted by Keyed Shaft given Stress in Key Calculator

✖The Compressive Stress in Key is the internal stress experienced by a key due to axial loads, affecting its performance and stability in mechanical assemblies.ⓘ Compressive Stress in Key [σ_c]			+10% -10%
✖The Diameter of Shaft using Key is the measurement across the widest part of a shaft that accommodates a key for secure attachment and torque transmission.ⓘ Diameter of Shaft using Key [d_s]			+10% -10%
✖The Length of Key is the measurement of the key used in mechanical systems to secure components and transmit torque between shafts and hubs.ⓘ Length of Key [l]			+10% -10%
✖The Height of Key is the vertical measurement of a key used in mechanical design, ensuring proper fit and alignment within a machine component.ⓘ Height of Key [h]			+10% -10%

✖The Transmitted Torque by Keyed Shaft is the rotational force transferred through a keyed connection, essential for ensuring reliable power transmission in mechanical systems.ⓘ Torque Transmitted by Keyed Shaft given Stress in Key [M_t]

⎘ Copy

👎

Formula

Reset

👍

Download Mechanical Formula PDF PDF Image

Torque Transmitted by Keyed Shaft given Stress in Key Solution

STEP 0: Pre-Calculation Summary

Formula Used

Transmitted Torque by Keyed Shaft = Compressive Stress in Key*Diameter of Shaft using Key*Length of Key*Height of Key/4
M_t = σ_c*d_s*l*h/4
This formula uses 5 Variables

Variables Used

Transmitted Torque by Keyed Shaft - (Measured in Newton Meter) - The Transmitted Torque by Keyed Shaft is the rotational force transferred through a keyed connection, essential for ensuring reliable power transmission in mechanical systems.
Compressive Stress in Key - (Measured in Pascal) - The Compressive Stress in Key is the internal stress experienced by a key due to axial loads, affecting its performance and stability in mechanical assemblies.
Diameter of Shaft using Key - (Measured in Meter) - The Diameter of Shaft using Key is the measurement across the widest part of a shaft that accommodates a key for secure attachment and torque transmission.
Length of Key - (Measured in Meter) - The Length of Key is the measurement of the key used in mechanical systems to secure components and transmit torque between shafts and hubs.
Height of Key - (Measured in Meter) - The Height of Key is the vertical measurement of a key used in mechanical design, ensuring proper fit and alignment within a machine component.

STEP 1: Convert Input(s) to Base Unit

Compressive Stress in Key: 128 Newton per Square Millimeter --> 128000000 Pascal (Check conversion here)
Diameter of Shaft using Key: 44.98998 Millimeter --> 0.04498998 Meter (Check conversion here)
Length of Key: 35 Millimeter --> 0.035 Meter (Check conversion here)
Height of Key: 4.5 Millimeter --> 0.0045 Meter (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

M_t = σ_c*d_s*l*h/4 --> 128000000*0.04498998*0.035*0.0045/4

Evaluating ... ...

M_t = 226.7494992

STEP 3: Convert Result to Output's Unit

226.7494992 Newton Meter -->226749.4992 Newton Millimeter (Check conversion here)

FINAL ANSWER

226749.4992 ≈ 226749.5 Newton Millimeter <-- Transmitted Torque by Keyed Shaft

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Mechanical » Machine Design » Design of Keys » Design of Square and Flat Keys » Torque Transmitted by Keyed Shaft given Stress in Key

Credits

Created by Kethavath Srinath

Osmania University (OU), Hyderabad

Kethavath Srinath has created this Calculator and 1000+ more calculators!

Verified by Urvi Rathod

Vishwakarma Government Engineering College (VGEC), Ahmedabad

Urvi Rathod has verified this Calculator and 1900+ more calculators!

< Design of Square and Flat Keys Calculators

Shear Stress in given Force on Key

Go Shear Stress = Force on Key/(Width of Key*Length of Key)

Torque Transmitted by Keyed Shaft given Force on Keys

Go Transmitted Torque by Keyed Shaft = Force on Key*Diameter of Shaft using Key/2

Shaft Diameter given Force on Key

Go Diameter of Shaft using Key = 2*Transmitted Torque by Keyed Shaft/Force on Key

Force on Key

Go Force on Key = 2*Transmitted Torque by Keyed Shaft/Diameter of Shaft using Key

Torque Transmitted by Keyed Shaft given Stress in Key Formula

Transmitted Torque by Keyed Shaft = Compressive Stress in Key*Diameter of Shaft using Key*Length of Key*Height of Key/4
M_t = σ_c*d_s*l*h/4

Define Torque Transmission?

A torque converter is a type of fluid coupling which transfers rotating power from a prime mover, like an internal combustion engine, to a rotating driven load. In a vehicle with an automatic transmission, the torque converter connects the power source to the load.

How to Calculate Torque Transmitted by Keyed Shaft given Stress in Key?

Torque Transmitted by Keyed Shaft given Stress in Key calculator uses Transmitted Torque by Keyed Shaft = Compressive Stress in Key*Diameter of Shaft using Key*Length of Key*Height of Key/4 to calculate the Transmitted Torque by Keyed Shaft, Torque Transmitted by Keyed Shaft given Stress in Key formula is defined as a method to evaluate the torque capacity of a keyed shaft based on the stress in the key. It helps in ensuring the design's reliability and performance in mechanical applications. Transmitted Torque by Keyed Shaft is denoted by M_t symbol.

How to calculate Torque Transmitted by Keyed Shaft given Stress in Key using this online calculator? To use this online calculator for Torque Transmitted by Keyed Shaft given Stress in Key, enter Compressive Stress in Key (σ_c), Diameter of Shaft using Key (d_s), Length of Key (l) & Height of Key (h) and hit the calculate button. Here is how the Torque Transmitted by Keyed Shaft given Stress in Key calculation can be explained with given input values -> 2.2E+8 = 128000000*0.04498998*0.035*0.0045/4.

FAQ

What is Torque Transmitted by Keyed Shaft given Stress in Key?

Torque Transmitted by Keyed Shaft given Stress in Key formula is defined as a method to evaluate the torque capacity of a keyed shaft based on the stress in the key. It helps in ensuring the design's reliability and performance in mechanical applications and is represented as M_t = σ_c*d_s*l*h/4 or Transmitted Torque by Keyed Shaft = Compressive Stress in Key*Diameter of Shaft using Key*Length of Key*Height of Key/4. The Compressive Stress in Key is the internal stress experienced by a key due to axial loads, affecting its performance and stability in mechanical assemblies, The Diameter of Shaft using Key is the measurement across the widest part of a shaft that accommodates a key for secure attachment and torque transmission, The Length of Key is the measurement of the key used in mechanical systems to secure components and transmit torque between shafts and hubs & The Height of Key is the vertical measurement of a key used in mechanical design, ensuring proper fit and alignment within a machine component.

How to calculate Torque Transmitted by Keyed Shaft given Stress in Key?

Torque Transmitted by Keyed Shaft given Stress in Key formula is defined as a method to evaluate the torque capacity of a keyed shaft based on the stress in the key. It helps in ensuring the design's reliability and performance in mechanical applications is calculated using Transmitted Torque by Keyed Shaft = Compressive Stress in Key*Diameter of Shaft using Key*Length of Key*Height of Key/4. To calculate Torque Transmitted by Keyed Shaft given Stress in Key, you need Compressive Stress in Key (σ_c), Diameter of Shaft using Key (d_s), Length of Key (l) & Height of Key (h). With our tool, you need to enter the respective value for Compressive Stress in Key, Diameter of Shaft using Key, Length of Key & Height of Key and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Transmitted Torque by Keyed Shaft?

In this formula, Transmitted Torque by Keyed Shaft uses Compressive Stress in Key, Diameter of Shaft using Key, Length of Key & Height of Key. We can use 1 other way(s) to calculate the same, which is/are as follows -

Transmitted Torque by Keyed Shaft = Force on Key*Diameter of Shaft using Key/2

Home

FREE PDFs

🔍 Search