Torque Exerted on Driving Pulley Calculator

✖Tension in Tight Side of Belt is described as the pulling force transmitted axially by the means of a string, a cable, chain, or similar one-dimensional continuous object.ⓘ Tension in Tight Side of Belt [T₁]			+10% -10%
✖Tension in Slack Side of Belt is described as the pulling force transmitted axially by the means of a string, a cable, chain, or similar one-dimensional continuous object.ⓘ Tension in Slack Side of Belt [T₂]			+10% -10%
✖Diameter of Driver is a chord that runs through the center point of the circle. It is the longest possible chord of any circle.ⓘ Diameter of Driver [d_d]			+10% -10%

✖Torque Exerted on Pulley is described as the turning effect of force on the axis of rotation. In brief, it is a moment of force. It is characterized by τ.ⓘ Torque Exerted on Driving Pulley [τ]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Belt Drive Formulas PDF PDF Image

Torque Exerted on Driving Pulley Solution

STEP 0: Pre-Calculation Summary

Formula Used

Torque Exerted on Pulley = (Tension in Tight Side of Belt-Tension in Slack Side of Belt)*Diameter of Driver/2
τ = (T₁-T₂)*d_d/2
This formula uses 4 Variables

Variables Used

Torque Exerted on Pulley - (Measured in Newton Meter) - Torque Exerted on Pulley is described as the turning effect of force on the axis of rotation. In brief, it is a moment of force. It is characterized by τ.
Tension in Tight Side of Belt - (Measured in Newton) - Tension in Tight Side of Belt is described as the pulling force transmitted axially by the means of a string, a cable, chain, or similar one-dimensional continuous object.
Tension in Slack Side of Belt - (Measured in Newton) - Tension in Slack Side of Belt is described as the pulling force transmitted axially by the means of a string, a cable, chain, or similar one-dimensional continuous object.
Diameter of Driver - (Measured in Meter) - Diameter of Driver is a chord that runs through the center point of the circle. It is the longest possible chord of any circle.

STEP 1: Convert Input(s) to Base Unit

Tension in Tight Side of Belt: 22 Newton --> 22 Newton No Conversion Required
Tension in Slack Side of Belt: 11 Newton --> 11 Newton No Conversion Required
Diameter of Driver: 0.014 Meter --> 0.014 Meter No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

τ = (T₁-T₂)*d_d/2 --> (22-11)*0.014/2

Evaluating ... ...

τ = 0.077

STEP 3: Convert Result to Output's Unit

0.077 Newton Meter --> No Conversion Required

FINAL ANSWER

0.077 Newton Meter <-- Torque Exerted on Pulley

(Calculation completed in 00.004 seconds)

You are here -

Home » Physics » Theory of Machine » Belt, Rope and Chain Drives » Mechanical » Belt Drive » Torque Exerted on Driving Pulley

Credits

Created by Anshika Arya

National Institute Of Technology (NIT), Hamirpur

Anshika Arya has created this Calculator and 2000+ more calculators!

Verified by Team Softusvista

Softusvista Office (Pune), India

Team Softusvista has verified this Calculator and 1100+ more calculators!

< Belt Drive Calculators

Relation between Pitch and Pitch Circle Diameter of Chain Drive

LaTeX Go Pitch Circle Diameter of Gear = Pitch of Chain Drive*cosec((180*pi/180)/Number of Teeth on Sprocket)

Torque Exerted on Driven Pulley

LaTeX Go Torque Exerted on Pulley = (Tension in Tight Side of Belt-Tension in Slack Side of Belt)*Diameter of Follower/2

Torque Exerted on Driving Pulley

LaTeX Go Torque Exerted on Pulley = (Tension in Tight Side of Belt-Tension in Slack Side of Belt)*Diameter of Driver/2

Power Transmitted by Belt

LaTeX Go Power Transmitted = (Tension in Tight Side of Belt-Tension in Slack Side of Belt)*Velocity of Belt

Torque Exerted on Driving Pulley Formula

LaTeX Go

Torque Exerted on Pulley = (Tension in Tight Side of Belt-Tension in Slack Side of Belt)*Diameter of Driver/2
τ = (T₁-T₂)*d_d/2

Which pulley turns faster?

If a smaller pulley turns a larger one, the larger one will turn slower, but with more power available at the shaft. If a bigger pulley turns a smaller one, the smaller one will turn much faster than the bigger one but with less power available at the shaft.

What is a belt drive used for?

Belt drive, in machinery, a pair of pulleys attached to usually parallel shafts and connected by an encircling flexible belt (band) that can serve to transmit and modify rotary motion from one shaft to the other.

How to Calculate Torque Exerted on Driving Pulley?

Torque Exerted on Driving Pulley calculator uses Torque Exerted on Pulley = (Tension in Tight Side of Belt-Tension in Slack Side of Belt)*Diameter of Driver/2 to calculate the Torque Exerted on Pulley, Torque Exerted on Driving Pulley formula is defined as the rotational force that causes the driving pulley to rotate, resulting in the transmission of power from one shaft to another in a belt drive system, enabling the conversion of mechanical energy. Torque Exerted on Pulley is denoted by τ symbol.

How to calculate Torque Exerted on Driving Pulley using this online calculator? To use this online calculator for Torque Exerted on Driving Pulley, enter Tension in Tight Side of Belt (T₁), Tension in Slack Side of Belt (T₂) & Diameter of Driver (d_d) and hit the calculate button. Here is how the Torque Exerted on Driving Pulley calculation can be explained with given input values -> 0.077 = (22-11)*0.014/2.

FAQ

What is Torque Exerted on Driving Pulley?

Torque Exerted on Driving Pulley formula is defined as the rotational force that causes the driving pulley to rotate, resulting in the transmission of power from one shaft to another in a belt drive system, enabling the conversion of mechanical energy and is represented as τ = (T₁-T₂)*d_d/2 or Torque Exerted on Pulley = (Tension in Tight Side of Belt-Tension in Slack Side of Belt)*Diameter of Driver/2. Tension in Tight Side of Belt is described as the pulling force transmitted axially by the means of a string, a cable, chain, or similar one-dimensional continuous object, Tension in Slack Side of Belt is described as the pulling force transmitted axially by the means of a string, a cable, chain, or similar one-dimensional continuous object & Diameter of Driver is a chord that runs through the center point of the circle. It is the longest possible chord of any circle.

How to calculate Torque Exerted on Driving Pulley?

Torque Exerted on Driving Pulley formula is defined as the rotational force that causes the driving pulley to rotate, resulting in the transmission of power from one shaft to another in a belt drive system, enabling the conversion of mechanical energy is calculated using Torque Exerted on Pulley = (Tension in Tight Side of Belt-Tension in Slack Side of Belt)*Diameter of Driver/2. To calculate Torque Exerted on Driving Pulley, you need Tension in Tight Side of Belt (T₁), Tension in Slack Side of Belt (T₂) & Diameter of Driver (d_d). With our tool, you need to enter the respective value for Tension in Tight Side of Belt, Tension in Slack Side of Belt & Diameter of Driver and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Torque Exerted on Pulley?

In this formula, Torque Exerted on Pulley uses Tension in Tight Side of Belt, Tension in Slack Side of Belt & Diameter of Driver. We can use 1 other way(s) to calculate the same, which is/are as follows -

Torque Exerted on Pulley = (Tension in Tight Side of Belt-Tension in Slack Side of Belt)*Diameter of Follower/2

Home

FREE PDFs

🔍 Search