LCM calculator

Torque available at Driving Axle Calculator

Physics Chemistry Engineering Financial More >>

↳

Mechanical Aerospace Basic Physics Others and Extra

⤿

Automobile Design of Automobile Elements Design of Machine Elements Fluid Mechanics More >>

⤿

Driveline Front Axle and Steering Race Car Vehicle Dynamics Suspension Geometry More >>

✖Engine Torque is defined as a rotating force produced by a engine's crankshaft due to power developed during power stroke in IC engine.ⓘ Engine Torque [T]			+10% -10%
✖Gear Reduction Through Auxiliary Transmission contains two sets of gears, giving the reduction (low) ratio when power is delivered through these two sets of gears.ⓘ Gear Reduction Through Auxiliary Transmission [R_ta]			+10% -10%
✖Axle Gear Reduction is defined as the number of revolutions the driveshaft must make to spin the axle one full turn.ⓘ Axle Gear Reduction [R_a]			+10% -10%

✖Torque Available at Driving Axle is defined as torque multiplied by gear reduction through the transmission and axle.ⓘ Torque available at Driving Axle [T_a]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Driveline Formulas PDF PDF Image

Torque available at Driving Axle Solution

STEP 0: Pre-Calculation Summary

Formula Used

Torque Available at Driving Axle = Engine Torque*Gear Reduction Through Auxiliary Transmission*Axle Gear Reduction
T_a = T*R_ta*R_a
This formula uses 4 Variables

Variables Used

Torque Available at Driving Axle - (Measured in Newton Meter) - Torque Available at Driving Axle is defined as torque multiplied by gear reduction through the transmission and axle.
Engine Torque - (Measured in Newton Meter) - Engine Torque is defined as a rotating force produced by a engine's crankshaft due to power developed during power stroke in IC engine.
Gear Reduction Through Auxiliary Transmission - Gear Reduction Through Auxiliary Transmission contains two sets of gears, giving the reduction (low) ratio when power is delivered through these two sets of gears.
Axle Gear Reduction - Axle Gear Reduction is defined as the number of revolutions the driveshaft must make to spin the axle one full turn.

STEP 1: Convert Input(s) to Base Unit

Engine Torque: 19100 Newton Millimeter --> 19.1 Newton Meter (Check conversion here)
Gear Reduction Through Auxiliary Transmission: 3 --> No Conversion Required
Axle Gear Reduction: 5.99 --> No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

T_a = T*R_ta*R_a --> 19.1*3*5.99

Evaluating ... ...

T_a = 343.227

STEP 3: Convert Result to Output's Unit

343.227 Newton Meter -->343227 Newton Millimeter (Check conversion here)

FINAL ANSWER

343227 Newton Millimeter <-- Torque Available at Driving Axle

(Calculation completed in 00.020 seconds)

You are here -

Home » Physics » Automobile » Mechanical » Driveline » Torque available at Driving Axle

Credits

Created by Syed Adnan

Ramaiah University of Applied Sciences (RUAS), bangalore

Syed Adnan has created this Calculator and 200+ more calculators!

Verified by Kartikay Pandit

National Institute Of Technology (NIT), Hamirpur

Kartikay Pandit has verified this Calculator and 400+ more calculators!

< Driveline Calculators

Angular Acceleration of Driven Shaft

LaTeX Go Angular Acceleration of Driven Shaft = -Angular Velocity of Driven Shaft^2*cos(Angle Between Driving And Driven Shafts)*sin(Angle Between Driving And Driven Shafts)^2*sin(2*Angle Rotated By Driven Shaft)/((1-cos(Angle Rotated By Driven Shaft)^2*sin(Angle Between Driving And Driven Shafts)^2)^2)

Velocity Ratio of Hooke's Joint

LaTeX Go Velocity Ratio = cos(Angle Between Driving And Driven Shafts)/(1-cos(Angle Rotated By Driving Shaft)^2*sin(Angle Between Driving And Driven Shafts)^2)

Axial Force of Multiplate Clutch using Uniform Wear Theory

LaTeX Go Total Axial Load = pi*Pressure of Intensity*Inner Diameter of Friction Disc*(Outer Diameter of Friction Disc-Inner Diameter of Friction Disc)*0.5

Gear Step

LaTeX Go Gear Step = Preceding Lower Gear Ratio Number/Gear Ratio Number

Torque available at Driving Axle Formula

LaTeX Go

Torque Available at Driving Axle = Engine Torque*Gear Reduction Through Auxiliary Transmission*Axle Gear Reduction
T_a = T*R_ta*R_a

What is the torque available at the driving axle?

The torque available at the driving axle is the hydraulic motor torque multiplied by gear reduction through the transmission and axle. it essentially means the drive shaft and pinion need to rotate 3.42 times in order to rotate the axle shafts once.

How to Calculate Torque available at Driving Axle?

Torque available at Driving Axle calculator uses Torque Available at Driving Axle = Engine Torque*Gear Reduction Through Auxiliary Transmission*Axle Gear Reduction to calculate the Torque Available at Driving Axle, The Torque available at driving axle formula is defined as the hydraulic motor torque multiplied by gear reduction through the transmission and axle. Torque Available at Driving Axle is denoted by T_a symbol.

How to calculate Torque available at Driving Axle using this online calculator? To use this online calculator for Torque available at Driving Axle, enter Engine Torque (T), Gear Reduction Through Auxiliary Transmission (R_ta) & Axle Gear Reduction (R_a) and hit the calculate button. Here is how the Torque available at Driving Axle calculation can be explained with given input values -> 3.4E+8 = 19.1*3*5.99.

FAQ

What is Torque available at Driving Axle?

The Torque available at driving axle formula is defined as the hydraulic motor torque multiplied by gear reduction through the transmission and axle and is represented as T_a = T*R_ta*R_a or Torque Available at Driving Axle = Engine Torque*Gear Reduction Through Auxiliary Transmission*Axle Gear Reduction. Engine Torque is defined as a rotating force produced by a engine's crankshaft due to power developed during power stroke in IC engine, Gear Reduction Through Auxiliary Transmission contains two sets of gears, giving the reduction (low) ratio when power is delivered through these two sets of gears & Axle Gear Reduction is defined as the number of revolutions the driveshaft must make to spin the axle one full turn.

How to calculate Torque available at Driving Axle?

The Torque available at driving axle formula is defined as the hydraulic motor torque multiplied by gear reduction through the transmission and axle is calculated using Torque Available at Driving Axle = Engine Torque*Gear Reduction Through Auxiliary Transmission*Axle Gear Reduction. To calculate Torque available at Driving Axle, you need Engine Torque (T), Gear Reduction Through Auxiliary Transmission (R_ta) & Axle Gear Reduction (R_a). With our tool, you need to enter the respective value for Engine Torque, Gear Reduction Through Auxiliary Transmission & Axle Gear Reduction and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search