Topographic Factor given Sediment Yield from Individual Storm Calculator

✖Sediment Yield from an Individual Storm is the amount of sediment leaving the watershed or catchment, and gross erosion is defined as the absolute amount of erosion occurring within the catchment.ⓘ Sediment Yield from an Individual Storm [Y]			+10% -10%
✖Runoff Volume is the average amount of water that flows down a particular river, per year, expressed as a volume of water flowing past a given point.ⓘ Runoff Volume [Q_V]			+10% -10%
✖Peak Rate of Runoff is the maximum rate of discharge during the period of runoff caused by a storm.ⓘ Peak Rate of Runoff [q_p]			+10% -10%
✖Soil Erodibility Factor is the intrinsic susceptibility of a soil to erosion by runoff and raindrop impact.ⓘ Soil Erodibility Factor [K]			+10% -10%
✖Cover Management Factor reflects the effect of cropping and management practices on erosion rates.ⓘ Cover Management Factor [C]			+10% -10%
✖Support Practice Factor is the ratio of soil loss with a support practice like strip cropping to that with a straight row farming up and down the slope.ⓘ Support Practice Factor [P]			+10% -10%

✖Topographic Factor also called indirect factors as they influence the growth and development of organisms by bringing variations in climatic factors.ⓘ Topographic Factor given Sediment Yield from Individual Storm [K_zt]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Soil Loss Equation Formulas PDF PDF Image

Topographic Factor given Sediment Yield from Individual Storm Solution

STEP 0: Pre-Calculation Summary

Formula Used

Topographic factor = Sediment Yield from an Individual Storm/(11.8*((Runoff Volume*Peak Rate of Runoff)^0.56)*Soil Erodibility Factor*Cover Management Factor*Support Practice Factor)
K_zt = Y/(11.8*((Q_V*q_p)^0.56)*K*C*P)
This formula uses 7 Variables

Variables Used

Topographic factor - Topographic Factor also called indirect factors as they influence the growth and development of organisms by bringing variations in climatic factors.
Sediment Yield from an Individual Storm - (Measured in Kilogram) - Sediment Yield from an Individual Storm is the amount of sediment leaving the watershed or catchment, and gross erosion is defined as the absolute amount of erosion occurring within the catchment.
Runoff Volume - (Measured in Cubic Meter) - Runoff Volume is the average amount of water that flows down a particular river, per year, expressed as a volume of water flowing past a given point.
Peak Rate of Runoff - (Measured in Cubic Meter per Second) - Peak Rate of Runoff is the maximum rate of discharge during the period of runoff caused by a storm.
Soil Erodibility Factor - Soil Erodibility Factor is the intrinsic susceptibility of a soil to erosion by runoff and raindrop impact.
Cover Management Factor - Cover Management Factor reflects the effect of cropping and management practices on erosion rates.
Support Practice Factor - Support Practice Factor is the ratio of soil loss with a support practice like strip cropping to that with a straight row farming up and down the slope.

STEP 1: Convert Input(s) to Base Unit

Sediment Yield from an Individual Storm: 135.7332 Kilogram --> 135.7332 Kilogram No Conversion Required
Runoff Volume: 19.5 Cubic Meter --> 19.5 Cubic Meter No Conversion Required
Peak Rate of Runoff: 1.256 Cubic Meter per Second --> 1.256 Cubic Meter per Second No Conversion Required
Soil Erodibility Factor: 0.17 --> No Conversion Required
Cover Management Factor: 0.61 --> No Conversion Required
Support Practice Factor: 0.74 --> No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

K_zt = Y/(11.8*((Q_V*q_p)^0.56)*K*C*P) --> 135.7332/(11.8*((19.5*1.256)^0.56)*0.17*0.61*0.74)

Evaluating ... ...

K_zt = 25.0000008903853

STEP 3: Convert Result to Output's Unit

25.0000008903853 --> No Conversion Required

FINAL ANSWER

25.0000008903853 ≈ 25 <-- Topographic factor

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Civil » Engineering Hydrology » Erosion and Reservoir Sedimentation » Soil Loss Equation » Modified Universal Soil Loss Equation » Topographic Factor given Sediment Yield from Individual Storm

Credits

Created by Mithila Muthamma PA

Coorg Institute of Technology (CIT), Coorg

Mithila Muthamma PA has created this Calculator and 2000+ more calculators!

Verified by M Naveen

National Institute of Technology (NIT), Warangal

M Naveen has verified this Calculator and 900+ more calculators!

< Modified Universal Soil Loss Equation Calculators

Storm Runoff Volume given Sediment Yield from Individual Storm

LaTeX Go Runoff Volume = ((Sediment Yield from an Individual Storm/(11.8*Soil Erodibility Factor*Topographic factor*Cover Management Factor*Support Practice Factor))^(1/0.56))/Peak Rate of Runoff

Peak Rate of Runoff given Sediment Yield from Individual Storm

LaTeX Go Peak Rate of Runoff = ((Sediment Yield from an Individual Storm/(11.8*Soil Erodibility Factor*Topographic factor*Cover Management Factor*Support Practice Factor))^(1/0.56))/Runoff Volume

Support Cultivation Practice given Sediment Yield from Individual Storm

LaTeX Go Support Practice Factor = Sediment Yield from an Individual Storm/(11.8*(Runoff Volume*Peak Rate of Runoff)^0.56*Soil Erodibility Factor*Topographic factor*Cover Management Factor)

Sediment Yield from Individual Storm

LaTeX Go Sediment Yield from an Individual Storm = 11.8*((Runoff Volume*Peak Rate of Runoff)^0.56)*Soil Erodibility Factor*Topographic factor*Cover Management Factor*Support Practice Factor

Topographic Factor given Sediment Yield from Individual Storm Formula

LaTeX Go

What is Topographic Factor?

The Topographic Factor is defined as the factors concerned with topography or physical features of an area are called topographic factors, including height, direction of slope and steepness of the slope.

What is Sediment Yield?

Sediment yield can be defined as the amount of sediment reaching or passing a point of interest in a given period of time, and sediment yield estimates are normally given as Tonnes per year or kilograms per year.

How to Calculate Topographic Factor given Sediment Yield from Individual Storm?

Topographic Factor given Sediment Yield from Individual Storm calculator uses Topographic factor = Sediment Yield from an Individual Storm/(11.8*((Runoff Volume*Peak Rate of Runoff)^0.56)*Soil Erodibility Factor*Cover Management Factor*Support Practice Factor) to calculate the Topographic factor, The Topographic Factor given Sediment Yield from Individual Storm formula is defined as the factors concerned with topography or physical features of the area are called topographic factors which include height, direction of slope and steepness of slope. Topographic factor is denoted by K_zt symbol.

How to calculate Topographic Factor given Sediment Yield from Individual Storm using this online calculator? To use this online calculator for Topographic Factor given Sediment Yield from Individual Storm, enter Sediment Yield from an Individual Storm (Y), Runoff Volume (Q_V), Peak Rate of Runoff (q_p), Soil Erodibility Factor (K), Cover Management Factor (C) & Support Practice Factor (P) and hit the calculate button. Here is how the Topographic Factor given Sediment Yield from Individual Storm calculation can be explained with given input values -> 21.58399 = 135.7332/(11.8*((19.5*1.256)^0.56)*0.17*0.61*0.74).

FAQ

What is Topographic Factor given Sediment Yield from Individual Storm?

The Topographic Factor given Sediment Yield from Individual Storm formula is defined as the factors concerned with topography or physical features of the area are called topographic factors which include height, direction of slope and steepness of slope and is represented as K_zt = Y/(11.8*((Q_V*q_p)^0.56)*K*C*P) or Topographic factor = Sediment Yield from an Individual Storm/(11.8*((Runoff Volume*Peak Rate of Runoff)^0.56)*Soil Erodibility Factor*Cover Management Factor*Support Practice Factor). Sediment Yield from an Individual Storm is the amount of sediment leaving the watershed or catchment, and gross erosion is defined as the absolute amount of erosion occurring within the catchment, Runoff Volume is the average amount of water that flows down a particular river, per year, expressed as a volume of water flowing past a given point, Peak Rate of Runoff is the maximum rate of discharge during the period of runoff caused by a storm, Soil Erodibility Factor is the intrinsic susceptibility of a soil to erosion by runoff and raindrop impact, Cover Management Factor reflects the effect of cropping and management practices on erosion rates & Support Practice Factor is the ratio of soil loss with a support practice like strip cropping to that with a straight row farming up and down the slope.

How to calculate Topographic Factor given Sediment Yield from Individual Storm?

The Topographic Factor given Sediment Yield from Individual Storm formula is defined as the factors concerned with topography or physical features of the area are called topographic factors which include height, direction of slope and steepness of slope is calculated using Topographic factor = Sediment Yield from an Individual Storm/(11.8*((Runoff Volume*Peak Rate of Runoff)^0.56)*Soil Erodibility Factor*Cover Management Factor*Support Practice Factor). To calculate Topographic Factor given Sediment Yield from Individual Storm, you need Sediment Yield from an Individual Storm (Y), Runoff Volume (Q_V), Peak Rate of Runoff (q_p), Soil Erodibility Factor (K), Cover Management Factor (C) & Support Practice Factor (P). With our tool, you need to enter the respective value for Sediment Yield from an Individual Storm, Runoff Volume, Peak Rate of Runoff, Soil Erodibility Factor, Cover Management Factor & Support Practice Factor and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search