Top Width given Hydraulic Depth Solution

STEP 0: Pre-Calculation Summary
Formula Used
Top Width = Wetted Surface Area of Channel/Hydraulic Depth
T = A/DHydraulic
This formula uses 3 Variables
Variables Used
Top Width - (Measured in Meter) - Top Width is defined as the width at the top of the section.
Wetted Surface Area of Channel - (Measured in Square Meter) - Wetted Surface Area of Channel [length^2] is the total area of outer surface in contact with the surrounding water.
Hydraulic Depth - (Measured in Meter) - Hydraulic Depth is defined as depth which in contact with water.
STEP 1: Convert Input(s) to Base Unit
Wetted Surface Area of Channel: 25 Square Meter --> 25 Square Meter No Conversion Required
Hydraulic Depth: 3 Meter --> 3 Meter No Conversion Required
STEP 2: Evaluate Formula
Substituting Input Values in Formula
T = A/DHydraulic --> 25/3
Evaluating ... ...
T = 8.33333333333333
STEP 3: Convert Result to Output's Unit
8.33333333333333 Meter --> No Conversion Required
FINAL ANSWER
8.33333333333333 8.333333 Meter <-- Top Width
(Calculation completed in 00.004 seconds)

Credits

Creator Image
Created by Rithik Agrawal
National Institute of Technology Karnataka (NITK), Surathkal
Rithik Agrawal has created this Calculator and 1300+ more calculators!
Verifier Image
Verified by M Naveen
National Institute of Technology (NIT), Warangal
M Naveen has verified this Calculator and 900+ more calculators!

Hydraulic Depth Calculators

Wetted Perimeter given Hydraulic Mean Depth
​ LaTeX ​ Go Wetted Perimeter of Channel = Wetted Surface Area of Channel/Hydraulic Radius of Channel
Hydraulic Radius or Hydraulic Mean Depth
​ LaTeX ​ Go Hydraulic Radius of Channel = Wetted Surface Area of Channel/Wetted Perimeter of Channel
Wetted Area given Hydraulic Mean Depth
​ LaTeX ​ Go Wetted Surface Area of Channel = Hydraulic Radius of Channel*Wetted Perimeter of Channel
Hydraulic Depth
​ LaTeX ​ Go Hydraulic Depth = Wetted Surface Area of Channel/Top Width

Top Width given Hydraulic Depth Formula

​LaTeX ​Go
Top Width = Wetted Surface Area of Channel/Hydraulic Depth
T = A/DHydraulic

What is Open Channel Flow?

Open-channel flow, a branch of hydraulics and fluid mechanics, is a type of liquid flow within a conduit or in channel with a free surface, known as a channel. The other type of flow within a conduit is pipe flow. These two types of flow are similar in many ways but differ in one important respect: the free surface.

How to Calculate Top Width given Hydraulic Depth?

Top Width given Hydraulic Depth calculator uses Top Width = Wetted Surface Area of Channel/Hydraulic Depth to calculate the Top Width, The Top Width given Hydraulic Depth is defined as the length of top section of channel perpendicular the flow. Top Width is denoted by T symbol.

How to calculate Top Width given Hydraulic Depth using this online calculator? To use this online calculator for Top Width given Hydraulic Depth, enter Wetted Surface Area of Channel (A) & Hydraulic Depth (DHydraulic) and hit the calculate button. Here is how the Top Width given Hydraulic Depth calculation can be explained with given input values -> 8.333333 = 25/3.

FAQ

What is Top Width given Hydraulic Depth?
The Top Width given Hydraulic Depth is defined as the length of top section of channel perpendicular the flow and is represented as T = A/DHydraulic or Top Width = Wetted Surface Area of Channel/Hydraulic Depth. Wetted Surface Area of Channel [length^2] is the total area of outer surface in contact with the surrounding water & Hydraulic Depth is defined as depth which in contact with water.
How to calculate Top Width given Hydraulic Depth?
The Top Width given Hydraulic Depth is defined as the length of top section of channel perpendicular the flow is calculated using Top Width = Wetted Surface Area of Channel/Hydraulic Depth. To calculate Top Width given Hydraulic Depth, you need Wetted Surface Area of Channel (A) & Hydraulic Depth (DHydraulic). With our tool, you need to enter the respective value for Wetted Surface Area of Channel & Hydraulic Depth and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!