Tool Life given Cutting Velocities and Tool Life for Reference Machining Condition Calculator

✖Reference Tool Life in Tool Life is the tool life of the tool obtained in the reference to machining condition.ⓘ Reference Tool Life in Tool Life [T_r]			+10% -10%
✖Reference Cutting Velocity is the cutting velocity of the tool used in the reference to machining condition.ⓘ Reference Cutting Velocity [V_ref]			+10% -10%
✖The Cutting Velocity in Tool Life is the tangential velocity at the periphery of the cutter or workpiece (whichever is rotating).ⓘ Cutting Velocity in Tool Life [V]			+10% -10%
✖Taylor's Tool Life Exponent is an experimental exponent that helps in quantifying the rate of tool wear.ⓘ Taylor's Tool Life Exponent [n]			+10% -10%

✖Life of Tool is the period of time for which the cutting edge, affected by the cutting procedure, retains its cutting capacity between sharpening operations.ⓘ Tool Life given Cutting Velocities and Tool Life for Reference Machining Condition [TL]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Tool Life and Tool Wear Formula PDF PDF Image

Tool Life given Cutting Velocities and Tool Life for Reference Machining Condition Solution

STEP 0: Pre-Calculation Summary

Formula Used

Life of Tool = Reference Tool Life in Tool Life*(Reference Cutting Velocity/Cutting Velocity in Tool Life)^(1/Taylor's Tool Life Exponent)
TL = T_r*(V_ref/V)^(1/n)
This formula uses 5 Variables

Variables Used

Life of Tool - (Measured in Second) - Life of Tool is the period of time for which the cutting edge, affected by the cutting procedure, retains its cutting capacity between sharpening operations.
Reference Tool Life in Tool Life - (Measured in Second) - Reference Tool Life in Tool Life is the tool life of the tool obtained in the reference to machining condition.
Reference Cutting Velocity - (Measured in Meter per Second) - Reference Cutting Velocity is the cutting velocity of the tool used in the reference to machining condition.
Cutting Velocity in Tool Life - (Measured in Meter per Second) - The Cutting Velocity in Tool Life is the tangential velocity at the periphery of the cutter or workpiece (whichever is rotating).
Taylor's Tool Life Exponent - Taylor's Tool Life Exponent is an experimental exponent that helps in quantifying the rate of tool wear.

STEP 1: Convert Input(s) to Base Unit

Reference Tool Life in Tool Life: 295896 Second --> 295896 Second No Conversion Required
Reference Cutting Velocity: 0.024083333 Meter per Second --> 0.024083333 Meter per Second No Conversion Required
Cutting Velocity in Tool Life: 0.833333 Meter per Second --> 0.833333 Meter per Second No Conversion Required
Taylor's Tool Life Exponent: 0.846625 --> No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

TL = T_r*(V_ref/V)^(1/n) --> 295896*(0.024083333/0.833333)^(1/0.846625)

Evaluating ... ...

TL = 4500.00124461168

STEP 3: Convert Result to Output's Unit

4500.00124461168 Second --> No Conversion Required

FINAL ANSWER

4500.00124461168 ≈ 4500.001 Second <-- Life of Tool

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Production Engineering » Metal Machining » Machine Tools and Operations » Tool Life and Tool Wear » Tool Life » Tool Life given Cutting Velocities and Tool Life for Reference Machining Condition

Credits

Created by Kumar Siddhant

Indian Institute of Information Technology, Design and Manufacturing (IIITDM), Jabalpur

Kumar Siddhant has created this Calculator and 400+ more calculators!

Verified by Parul Keshav

National Institute of Technology (NIT), Srinagar

Parul Keshav has verified this Calculator and 400+ more calculators!

< Tool Life Calculators

Tool temperature

LaTeX Go Tool Temperature = (Constant For Tool Temperature*Specific Cutting Energy Per Unit Cutting Force*Cutting Velocity in Tool Life^0.44*Area of Cut^0.22)/(Thermal Conductivity^0.44*Specific Heat Capacity of Work^0.56)

Depth of Cut given Cutting Velocity, Tool Life, and Volume of Metal Removed

LaTeX Go Cutting Depth = Metal Removed Volume/(Life of Tool*Feed Rate*Cutting Velocity in Tool Life)

Feed given Cutting Velocity, Tool Life, and Volume of Metal Removed

LaTeX Go Feed Rate = Metal Removed Volume/(Life of Tool*Cutting Velocity in Tool Life*Cutting Depth)

Volume of Metal removed given Cutting Velocity and Tool Life

LaTeX Go Metal Removed Volume = Life of Tool*Cutting Velocity in Tool Life*Feed Rate*Cutting Depth

Tool Life given Cutting Velocities and Tool Life for Reference Machining Condition Formula

LaTeX Go

Life of Tool = Reference Tool Life in Tool Life*(Reference Cutting Velocity/Cutting Velocity in Tool Life)^(1/Taylor's Tool Life Exponent)
TL = T_r*(V_ref/V)^(1/n)

What is reference Machining Condition?

Reference Machining Condition is usually a state of Machining Operation which has been idealized as the most suitable. It is used to draw a comparison between different other Machining Conditions.

How to Calculate Tool Life given Cutting Velocities and Tool Life for Reference Machining Condition?

Tool Life given Cutting Velocities and Tool Life for Reference Machining Condition calculator uses Life of Tool = Reference Tool Life in Tool Life*(Reference Cutting Velocity/Cutting Velocity in Tool Life)^(1/Taylor's Tool Life Exponent) to calculate the Life of Tool, The Tool Life given Cutting Velocities and Tool Life for Reference Machining Condition is a method to determine the Tool Sharpening time interval required for a given Cutting Velocity in a machining condition when compared to the reference Condition. Life of Tool is denoted by TL symbol.

How to calculate Tool Life given Cutting Velocities and Tool Life for Reference Machining Condition using this online calculator? To use this online calculator for Tool Life given Cutting Velocities and Tool Life for Reference Machining Condition, enter Reference Tool Life in Tool Life (T_r), Reference Cutting Velocity (V_ref), Cutting Velocity in Tool Life (V) & Taylor's Tool Life Exponent (n) and hit the calculate button. Here is how the Tool Life given Cutting Velocities and Tool Life for Reference Machining Condition calculation can be explained with given input values -> 4500.001 = 295896*(0.024083333/0.833333)^(1/0.846625).

FAQ

What is Tool Life given Cutting Velocities and Tool Life for Reference Machining Condition?

The Tool Life given Cutting Velocities and Tool Life for Reference Machining Condition is a method to determine the Tool Sharpening time interval required for a given Cutting Velocity in a machining condition when compared to the reference Condition and is represented as TL = T_r*(V_ref/V)^(1/n) or Life of Tool = Reference Tool Life in Tool Life*(Reference Cutting Velocity/Cutting Velocity in Tool Life)^(1/Taylor's Tool Life Exponent). Reference Tool Life in Tool Life is the tool life of the tool obtained in the reference to machining condition, Reference Cutting Velocity is the cutting velocity of the tool used in the reference to machining condition, The Cutting Velocity in Tool Life is the tangential velocity at the periphery of the cutter or workpiece (whichever is rotating) & Taylor's Tool Life Exponent is an experimental exponent that helps in quantifying the rate of tool wear.

How to calculate Tool Life given Cutting Velocities and Tool Life for Reference Machining Condition?

The Tool Life given Cutting Velocities and Tool Life for Reference Machining Condition is a method to determine the Tool Sharpening time interval required for a given Cutting Velocity in a machining condition when compared to the reference Condition is calculated using Life of Tool = Reference Tool Life in Tool Life*(Reference Cutting Velocity/Cutting Velocity in Tool Life)^(1/Taylor's Tool Life Exponent). To calculate Tool Life given Cutting Velocities and Tool Life for Reference Machining Condition, you need Reference Tool Life in Tool Life (T_r), Reference Cutting Velocity (V_ref), Cutting Velocity in Tool Life (V) & Taylor's Tool Life Exponent (n). With our tool, you need to enter the respective value for Reference Tool Life in Tool Life, Reference Cutting Velocity, Cutting Velocity in Tool Life & Taylor's Tool Life Exponent and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search