Tolerance Unit Solution

STEP 0: Pre-Calculation Summary
Formula Used
Tolerance Unit = 0.45*(Cylinder Dimension)^(1/3)+0.001*Cylinder Dimension
i = 0.45*(CD)^(1/3)+0.001*CD
This formula uses 2 Variables
Variables Used
Tolerance Unit - A Tolerance Unit in micrometres is a unit of length used to express the degree of tolerance allowed in fitting cylinders into cylindrical holes.
Cylinder Dimension - (Measured in Meter) - Cylinder Dimension in mm is the value of the object's diameter inspected.
STEP 1: Convert Input(s) to Base Unit
Cylinder Dimension: 27 Millimeter --> 0.027 Meter (Check conversion ​here)
STEP 2: Evaluate Formula
Substituting Input Values in Formula
i = 0.45*(CD)^(1/3)+0.001*CD --> 0.45*(0.027)^(1/3)+0.001*0.027
Evaluating ... ...
i = 0.135027
STEP 3: Convert Result to Output's Unit
0.135027 --> No Conversion Required
FINAL ANSWER
0.135027 <-- Tolerance Unit
(Calculation completed in 00.004 seconds)

Credits

Creator Image
Created by Rajat Vishwakarma
University Institute of Technology RGPV (UIT - RGPV), Bhopal
Rajat Vishwakarma has created this Calculator and 400+ more calculators!
Verifier Image
Vallurupalli Nageswara Rao Vignana Jyothi Institute of Engineering and Technology (VNRVJIET), Hyderabad
Sai Venkata Phanindra Chary Arendra has verified this Calculator and 300+ more calculators!

Clearance fits Calculators

Maximum limit size of shaft from minimum clearance
​ LaTeX ​ Go Maximum Limit Size of Shaft = Minimum Limit Size of Hole-Minimum Clearance
Minimum limit size of hole from minimum clearance
​ LaTeX ​ Go Minimum Limit Size of Hole = Minimum Clearance+Maximum Limit Size of Shaft
Minimum clearance
​ LaTeX ​ Go Minimum Clearance = Minimum Limit Size of Hole-Maximum Limit Size of Shaft
Tolerance Unit
​ LaTeX ​ Go Tolerance Unit = 0.45*(Cylinder Dimension)^(1/3)+0.001*Cylinder Dimension

Tolerance Unit Formula

​LaTeX ​Go
Tolerance Unit = 0.45*(Cylinder Dimension)^(1/3)+0.001*Cylinder Dimension
i = 0.45*(CD)^(1/3)+0.001*CD

What are Tolerances?

Tolerance is the permissible deviation from the nominal size. Tolerance on a dimension can be specified in any of the two forms; unilateral or bilateral. In unilateral tolerance, the variation of the size will be wholly on one side. In bilateral tolerance, the variation will be to both sides.

How to Calculate Tolerance Unit?

Tolerance Unit calculator uses Tolerance Unit = 0.45*(Cylinder Dimension)^(1/3)+0.001*Cylinder Dimension to calculate the Tolerance Unit, The Tolerance unit (i) formula is defined as a unit of length used to express the degree of tolerance allowed in fitting cylinders into cylindrical holes, measured in micrometers. Tolerance Unit is denoted by i symbol.

How to calculate Tolerance Unit using this online calculator? To use this online calculator for Tolerance Unit, enter Cylinder Dimension (CD) and hit the calculate button. Here is how the Tolerance Unit calculation can be explained with given input values -> 0.135027 = 0.45*(0.027)^(1/3)+0.001*0.027.

FAQ

What is Tolerance Unit?
The Tolerance unit (i) formula is defined as a unit of length used to express the degree of tolerance allowed in fitting cylinders into cylindrical holes, measured in micrometers and is represented as i = 0.45*(CD)^(1/3)+0.001*CD or Tolerance Unit = 0.45*(Cylinder Dimension)^(1/3)+0.001*Cylinder Dimension. Cylinder Dimension in mm is the value of the object's diameter inspected.
How to calculate Tolerance Unit?
The Tolerance unit (i) formula is defined as a unit of length used to express the degree of tolerance allowed in fitting cylinders into cylindrical holes, measured in micrometers is calculated using Tolerance Unit = 0.45*(Cylinder Dimension)^(1/3)+0.001*Cylinder Dimension. To calculate Tolerance Unit, you need Cylinder Dimension (CD). With our tool, you need to enter the respective value for Cylinder Dimension and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!