Time taken for storage type heat exchanger Calculator

✖The Time Factor is a measure that indicates the duration required for heat transfer processes within a heat exchanger, influencing its efficiency and performance.ⓘ Time Factor [n]			+10% -10%
✖The Specific heat of matrix material is the amount of heat required to raise the temperature of a unit mass of the matrix material by one degree Celsius.ⓘ Specific heat of matrix material [cs]			+10% -10%
✖The Mass of Solid is the total weight of a solid material, which is essential for analyzing heat transfer and mechanical properties in heat exchanger applications.ⓘ Mass of Solid [ML]			+10% -10%
✖The Surface Area is the total area exposed to the surrounding environment, influencing heat transfer efficiency in heat exchangers and impacting overall system performance.ⓘ Surface Area [SA]			+10% -10%
✖The Convective Heat Transfer Coefficient is a measure of the heat transfer rate between a solid surface and a fluid in motion, influencing the efficiency of heat exchangers.ⓘ Convective Heat Transfer Coefficient [h_Conv]			+10% -10%

✖The Total Time Taken is the duration required for a specific process or operation within the context of heat exchangers in mechanical systems.ⓘ Time taken for storage type heat exchanger [t_total]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Heat and Mass Transfer Formula PDF PDF Image

Time taken for storage type heat exchanger Solution

STEP 0: Pre-Calculation Summary

Formula Used

Total Time Taken = (Time Factor*Specific heat of matrix material*Mass of Solid)/(Surface Area*Convective Heat Transfer Coefficient)
t_total = (n*cs*ML)/(SA*h_Conv)
This formula uses 6 Variables

Variables Used

Total Time Taken - (Measured in Second) - The Total Time Taken is the duration required for a specific process or operation within the context of heat exchangers in mechanical systems.
Time Factor - The Time Factor is a measure that indicates the duration required for heat transfer processes within a heat exchanger, influencing its efficiency and performance.
Specific heat of matrix material - (Measured in Joule per Kilogram per K) - The Specific heat of matrix material is the amount of heat required to raise the temperature of a unit mass of the matrix material by one degree Celsius.
Mass of Solid - The Mass of Solid is the total weight of a solid material, which is essential for analyzing heat transfer and mechanical properties in heat exchanger applications.
Surface Area - (Measured in Square Meter) - The Surface Area is the total area exposed to the surrounding environment, influencing heat transfer efficiency in heat exchangers and impacting overall system performance.
Convective Heat Transfer Coefficient - (Measured in Watt per Square Meter per Kelvin) - The Convective Heat Transfer Coefficient is a measure of the heat transfer rate between a solid surface and a fluid in motion, influencing the efficiency of heat exchangers.

STEP 1: Convert Input(s) to Base Unit

Time Factor: 8.16 --> No Conversion Required
Specific heat of matrix material: 15 Joule per Kilogram per K --> 15 Joule per Kilogram per K No Conversion Required
Mass of Solid: 5.882353 --> No Conversion Required
Surface Area: 18 Square Meter --> 18 Square Meter No Conversion Required
Convective Heat Transfer Coefficient: 0.51 Watt per Square Meter per Kelvin --> 0.51 Watt per Square Meter per Kelvin No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

t_total = (n*cs*ML)/(SA*h_Conv) --> (8.16*15*5.882353)/(18*0.51)

Evaluating ... ...

t_total = 78.4313733333333

STEP 3: Convert Result to Output's Unit

78.4313733333333 Second --> No Conversion Required

FINAL ANSWER

78.4313733333333 ≈ 78.43137 Second <-- Total Time Taken

(Calculation completed in 00.004 seconds)

You are here -

Home » Physics » Heat and Mass Transfer » Heat Exchanger » Mechanical » Physical Parameters of Heat Exchanger » Time taken for storage type heat exchanger

Credits

Created by Nishan Poojary

Shri Madhwa Vadiraja Institute of Technology and Management (SMVITM), Udupi

Nishan Poojary has created this Calculator and 500+ more calculators!

Verified by Anshika Arya

National Institute Of Technology (NIT), Hamirpur

Anshika Arya has verified this Calculator and 2500+ more calculators!

< Physical Parameters of Heat Exchanger Calculators

Mass flow rate of cold fluid

LaTeX Go Mass Flow Rate of Cold Fluid = (Effectiveness of Heat Exchanger*Minimum heat capacity/Specific heat of cold fluid)*(1/((Exit Temperature of Cold Fluid-Entry Temperature of Cold Fluid)/(Entry Temperature of Hot Fluid-Entry Temperature of Cold Fluid)))

Mass flow rate of hot fluid

LaTeX Go Mass Flow Rate of Hot Fluid = (Effectiveness of Heat Exchanger*Minimum heat capacity/Specific heat of hot fluid)*(1/((Entry Temperature of Hot Fluid-Exit Temperature of Cold Fluid)/(Entry Temperature of Hot Fluid-Entry Temperature of Cold Fluid)))

Correction factor in heat exchanger

LaTeX Go Correction Factor = Heat exchanged/(Overall Heat Transfer Coefficient*Area*Logarithmic Mean Temperature Difference)

Area of heat exchanger

LaTeX Go Area = Heat exchanged/(Overall Heat Transfer Coefficient*Logarithmic Mean Temperature Difference*Correction Factor)

Time taken for storage type heat exchanger Formula

LaTeX Go

Total Time Taken = (Time Factor*Specific heat of matrix material*Mass of Solid)/(Surface Area*Convective Heat Transfer Coefficient)
t_total = (n*cs*ML)/(SA*h_Conv)

What is Heat exchanger?

A heat exchanger is a system used to transfer heat between two or more fluids. Heat exchangers are used in both cooling and heating processes. The fluids may be separated by a solid wall to prevent mixing or they may be in direct contact. They are widely used in space heating, refrigeration, air conditioning, power stations, chemical plants, petrochemical plants, petroleum refineries, natural-gas processing, and sewage treatment. The classic example of a heat exchanger is found in an internal combustion engine in which a circulating fluid known as engine coolant flows through radiator coils and air flows past the coils, which cools the coolant and heats the incoming air. Another example is the heat sink, which is a passive heat exchanger that transfers the heat generated by an electronic or a mechanical device to a fluid medium, often air or a liquid coolant.

How to Calculate Time taken for storage type heat exchanger?

Time taken for storage type heat exchanger calculator uses Total Time Taken = (Time Factor*Specific heat of matrix material*Mass of Solid)/(Surface Area*Convective Heat Transfer Coefficient) to calculate the Total Time Taken, Time taken for storage type heat exchanger formula is defined as a measure of the duration required for a heat exchanger to transfer thermal energy, considering factors such as mass flow, specific heat, surface area, and convective heat transfer coefficient. Total Time Taken is denoted by t_total symbol.

How to calculate Time taken for storage type heat exchanger using this online calculator? To use this online calculator for Time taken for storage type heat exchanger, enter Time Factor (n), Specific heat of matrix material (cs), Mass of Solid (ML), Surface Area (SA) & Convective Heat Transfer Coefficient (h_Conv) and hit the calculate button. Here is how the Time taken for storage type heat exchanger calculation can be explained with given input values -> 81.6 = (8.16*15*5.882353)/(18*0.51).

FAQ

What is Time taken for storage type heat exchanger?

Time taken for storage type heat exchanger formula is defined as a measure of the duration required for a heat exchanger to transfer thermal energy, considering factors such as mass flow, specific heat, surface area, and convective heat transfer coefficient and is represented as t_total = (n*cs*ML)/(SA*h_Conv) or Total Time Taken = (Time Factor*Specific heat of matrix material*Mass of Solid)/(Surface Area*Convective Heat Transfer Coefficient). The Time Factor is a measure that indicates the duration required for heat transfer processes within a heat exchanger, influencing its efficiency and performance, The Specific heat of matrix material is the amount of heat required to raise the temperature of a unit mass of the matrix material by one degree Celsius, The Mass of Solid is the total weight of a solid material, which is essential for analyzing heat transfer and mechanical properties in heat exchanger applications, The Surface Area is the total area exposed to the surrounding environment, influencing heat transfer efficiency in heat exchangers and impacting overall system performance & The Convective Heat Transfer Coefficient is a measure of the heat transfer rate between a solid surface and a fluid in motion, influencing the efficiency of heat exchangers.

How to calculate Time taken for storage type heat exchanger?

Time taken for storage type heat exchanger formula is defined as a measure of the duration required for a heat exchanger to transfer thermal energy, considering factors such as mass flow, specific heat, surface area, and convective heat transfer coefficient is calculated using Total Time Taken = (Time Factor*Specific heat of matrix material*Mass of Solid)/(Surface Area*Convective Heat Transfer Coefficient). To calculate Time taken for storage type heat exchanger, you need Time Factor (n), Specific heat of matrix material (cs), Mass of Solid (ML), Surface Area (SA) & Convective Heat Transfer Coefficient (h_Conv). With our tool, you need to enter the respective value for Time Factor, Specific heat of matrix material, Mass of Solid, Surface Area & Convective Heat Transfer Coefficient and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search