Tidal Period given Total Maximum Discharge for Total of all Inlets Calculator

✖Ocean Tide Amplitude is the height difference between high and low tides, reflecting gravitational forces from the moon and sun.ⓘ Ocean Tide Amplitude [a_o]			+10% -10%
✖Maximum Velocity in the Inlet Throat [length/time] is measure of speed in the inlet throat.ⓘ Maximum Velocity in the Inlet Throat [V_max]			+10% -10%
✖Surface Area of Bay is defined as a small body of water set off from the main body.ⓘ Surface Area of Bay [A_b]			+10% -10%
✖Maximum Discharge of Total Inlets is the maximum volume flow rate passing a particular location during an event.ⓘ Maximum Discharge of Total Inlets [Q_max]			+10% -10%

✖Tidal Period is the time taken for a specific site on Earth to rotate from an exact point under moon to same point under moon, also known as “tidal day” and it’s slightly longer than a solar day.ⓘ Tidal Period given Total Maximum Discharge for Total of all Inlets [T]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Bay Superelevation, Effect of Freshwater Inflow, Multiple Inlets and Wave Current Interaction Formulas PDF PDF Image

Tidal Period given Total Maximum Discharge for Total of all Inlets Solution

STEP 0: Pre-Calculation Summary

Formula Used

Tidal Period = (2*pi*Ocean Tide Amplitude*Maximum Velocity in the Inlet Throat*Surface Area of Bay)/Maximum Discharge of Total Inlets
T = (2*pi*a_o*V_max*A_b)/Q_max
This formula uses 1 Constants, 5 Variables

Constants Used

pi - Archimedes' constant Value Taken As 3.14159265358979323846264338327950288

Variables Used

Tidal Period - (Measured in Second) - Tidal Period is the time taken for a specific site on Earth to rotate from an exact point under moon to same point under moon, also known as “tidal day” and it’s slightly longer than a solar day.
Ocean Tide Amplitude - (Measured in Meter) - Ocean Tide Amplitude is the height difference between high and low tides, reflecting gravitational forces from the moon and sun.
Maximum Velocity in the Inlet Throat - (Measured in Meter per Second) - Maximum Velocity in the Inlet Throat [length/time] is measure of speed in the inlet throat.
Surface Area of Bay - (Measured in Square Meter) - Surface Area of Bay is defined as a small body of water set off from the main body.
Maximum Discharge of Total Inlets - (Measured in Cubic Meter per Second) - Maximum Discharge of Total Inlets is the maximum volume flow rate passing a particular location during an event.

STEP 1: Convert Input(s) to Base Unit

Ocean Tide Amplitude: 4 Meter --> 4 Meter No Conversion Required
Maximum Velocity in the Inlet Throat: 35 Meter per Second --> 35 Meter per Second No Conversion Required
Surface Area of Bay: 1.5001 Square Meter --> 1.5001 Square Meter No Conversion Required
Maximum Discharge of Total Inlets: 10.15 Cubic Meter per Second --> 10.15 Cubic Meter per Second No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

T = (2*pi*a_o*V_max*A_b)/Q_max --> (2*pi*4*35*1.5001)/10.15

Evaluating ... ...

T = 130.005603852415

STEP 3: Convert Result to Output's Unit

130.005603852415 Second --> No Conversion Required

FINAL ANSWER

130.005603852415 ≈ 130.0056 Second <-- Tidal Period

(Calculation completed in 00.020 seconds)

You are here -

Home » Engineering » Civil » Coastal and Ocean Engineering » Hydrodynamics of Tidal Inlets 1 » Inlet Hydrodynamics » Bay Superelevation, Effect of Freshwater Inflow, Multiple Inlets and Wave Current Interaction » Multiple Inlets » Tidal Period given Total Maximum Discharge for Total of all Inlets

Credits

Created by Mithila Muthamma PA

Coorg Institute of Technology (CIT), Coorg

Mithila Muthamma PA has created this Calculator and 2000+ more calculators!

Verified by M Naveen

National Institute of Technology (NIT), Warangal

M Naveen has verified this Calculator and 900+ more calculators!

< Multiple Inlets Calculators

Ocean Tide Amplitude given Total Maximum Discharge for Total of all Inlets

LaTeX Go Ocean Tide Amplitude = (Maximum Discharge of Total Inlets*Tidal Period)/(2*pi*Surface Area of Bay*Maximum Velocity in the Inlet Throat)

Surface Area of Bay or Basin given Total Maximum Discharge

LaTeX Go Surface Area of Bay = (Maximum Discharge of Total Inlets*Tidal Period)/(2*pi*Ocean Tide Amplitude*Maximum Velocity in the Inlet Throat)

Tidal Period given Total Maximum Discharge for Total of all Inlets

LaTeX Go Tidal Period = (2*pi*Ocean Tide Amplitude*Maximum Velocity in the Inlet Throat*Surface Area of Bay)/Maximum Discharge of Total Inlets

Total Maximum Discharge for Total of all Inlets

LaTeX Go Maximum Discharge of Total Inlets = (2*pi*Ocean Tide Amplitude*Surface Area of Bay*Maximum Velocity in the Inlet Throat)/Tidal Period

Tidal Period given Total Maximum Discharge for Total of all Inlets Formula

LaTeX Go

Tidal Period = (2*pi*Ocean Tide Amplitude*Maximum Velocity in the Inlet Throat*Surface Area of Bay)/Maximum Discharge of Total Inlets
T = (2*pi*a_o*V_max*A_b)/Q_max

What is Bay Superelevation?

A Superelevation of the bay means that the average level of the bay is greater than the average elevation of the ocean over a given time period. An obvious cause of this effect is the introduction of fresh water into the bay from local rivers and streams. The effect of long-term (months or years) rise in sea level causing a long-term rise in bay level is not included in this definition of bay superelevation, since both sea and bay are responding simultaneously. The bay may not rise at the same rate as the sea due to possible
circulation effects if multiple inlets connect the bay to the ocean.

How do you calculate the period of a tidal?

An efficient way of guesstimating how much water there is, at any given time of day, over a particular point. The rule of twelfths works like this; take the difference in height between the high and low tide on that day, and divide that by 12 equal chunks.

How to Calculate Tidal Period given Total Maximum Discharge for Total of all Inlets?

Tidal Period given Total Maximum Discharge for Total of all Inlets calculator uses Tidal Period = (2*pi*Ocean Tide Amplitude*Maximum Velocity in the Inlet Throat*Surface Area of Bay)/Maximum Discharge of Total Inlets to calculate the Tidal Period, The Tidal Period given Total Maximum Discharge for Total of all Inlets is defined as an efficient way of guesstimating how much water there is, at any given time of day, over a particular point. Tidal Period is denoted by T symbol.

How to calculate Tidal Period given Total Maximum Discharge for Total of all Inlets using this online calculator? To use this online calculator for Tidal Period given Total Maximum Discharge for Total of all Inlets, enter Ocean Tide Amplitude (a_o), Maximum Velocity in the Inlet Throat (V_max), Surface Area of Bay (A_b) & Maximum Discharge of Total Inlets (Q_max) and hit the calculate button. Here is how the Tidal Period given Total Maximum Discharge for Total of all Inlets calculation can be explained with given input values -> 129.9969 = (2*pi*4*35*1.5001)/10.15.

FAQ

What is Tidal Period given Total Maximum Discharge for Total of all Inlets?

The Tidal Period given Total Maximum Discharge for Total of all Inlets is defined as an efficient way of guesstimating how much water there is, at any given time of day, over a particular point and is represented as T = (2*pi*a_o*V_max*A_b)/Q_max or Tidal Period = (2*pi*Ocean Tide Amplitude*Maximum Velocity in the Inlet Throat*Surface Area of Bay)/Maximum Discharge of Total Inlets. Ocean Tide Amplitude is the height difference between high and low tides, reflecting gravitational forces from the moon and sun, Maximum Velocity in the Inlet Throat [length/time] is measure of speed in the inlet throat, Surface Area of Bay is defined as a small body of water set off from the main body & Maximum Discharge of Total Inlets is the maximum volume flow rate passing a particular location during an event.

How to calculate Tidal Period given Total Maximum Discharge for Total of all Inlets?

The Tidal Period given Total Maximum Discharge for Total of all Inlets is defined as an efficient way of guesstimating how much water there is, at any given time of day, over a particular point is calculated using Tidal Period = (2*pi*Ocean Tide Amplitude*Maximum Velocity in the Inlet Throat*Surface Area of Bay)/Maximum Discharge of Total Inlets. To calculate Tidal Period given Total Maximum Discharge for Total of all Inlets, you need Ocean Tide Amplitude (a_o), Maximum Velocity in the Inlet Throat (V_max), Surface Area of Bay (A_b) & Maximum Discharge of Total Inlets (Q_max). With our tool, you need to enter the respective value for Ocean Tide Amplitude, Maximum Velocity in the Inlet Throat, Surface Area of Bay & Maximum Discharge of Total Inlets and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search