Thrust Factor on Bearing given Equivalent Dynamic Load Calculator

✖Equivalent dynamic load on bearing is defined as the net dynamic load on a rolling contact bearing.ⓘ Equivalent Dynamic Load on Bearing [P_eq]			+10% -10%
✖Radial Factor is used to denote the portion of the radial force contributing to equivalent bearing load.ⓘ Radial Factor [X]			+10% -10%
✖Race-rotation factor is a factor accounting for the rotation of the races of a bearing.ⓘ Race-Rotation Factor [V]			+10% -10%
✖Radial load acting on bearing is the amount of load onto the bearing acting radially.ⓘ Radial Load Acting on Bearing [F_r]			+10% -10%
✖Axial or thrust load acting on bearing is the amount of thrust load onto the bearing acting axially.ⓘ Axial or Thrust Load Acting on Bearing [F_a]			+10% -10%

✖Thrust Factor for Bearing is used to denote the portion of the thrust force contributing to equivalent bearing load.ⓘ Thrust Factor on Bearing given Equivalent Dynamic Load [Y]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Design of Rolling Contact Bearing Formulas PDF PDF Image

Thrust Factor on Bearing given Equivalent Dynamic Load Solution

STEP 0: Pre-Calculation Summary

Formula Used

Thrust Factor for Bearing = (Equivalent Dynamic Load on Bearing-(Radial Factor*Race-Rotation Factor*Radial Load Acting on Bearing))/Axial or Thrust Load Acting on Bearing
Y = (P_eq-(X*V*F_r))/F_a
This formula uses 6 Variables

Variables Used

Thrust Factor for Bearing - Thrust Factor for Bearing is used to denote the portion of the thrust force contributing to equivalent bearing load.
Equivalent Dynamic Load on Bearing - (Measured in Newton) - Equivalent dynamic load on bearing is defined as the net dynamic load on a rolling contact bearing.
Radial Factor - Radial Factor is used to denote the portion of the radial force contributing to equivalent bearing load.
Race-Rotation Factor - Race-rotation factor is a factor accounting for the rotation of the races of a bearing.
Radial Load Acting on Bearing - (Measured in Newton) - Radial load acting on bearing is the amount of load onto the bearing acting radially.
Axial or Thrust Load Acting on Bearing - (Measured in Newton) - Axial or thrust load acting on bearing is the amount of thrust load onto the bearing acting axially.

STEP 1: Convert Input(s) to Base Unit

Equivalent Dynamic Load on Bearing: 9650 Newton --> 9650 Newton No Conversion Required
Radial Factor: 0.56 --> No Conversion Required
Race-Rotation Factor: 1.2 --> No Conversion Required
Radial Load Acting on Bearing: 8050 Newton --> 8050 Newton No Conversion Required
Axial or Thrust Load Acting on Bearing: 3000 Newton --> 3000 Newton No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

Y = (P_eq-(X*V*F_r))/F_a --> (9650-(0.56*1.2*8050))/3000

Evaluating ... ...

Y = 1.41346666666667

STEP 3: Convert Result to Output's Unit

1.41346666666667 --> No Conversion Required

FINAL ANSWER

1.41346666666667 ≈ 1.413467 <-- Thrust Factor for Bearing

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Mechanical » Machine Design » Design of Rolling Contact Bearing » Dynamic and Equivalent Load » Thrust Factor on Bearing given Equivalent Dynamic Load

Credits

Created by Kethavath Srinath

Osmania University (OU), Hyderabad

Kethavath Srinath has created this Calculator and 1000+ more calculators!

Verified by Urvi Rathod

Vishwakarma Government Engineering College (VGEC), Ahmedabad

Urvi Rathod has verified this Calculator and 1900+ more calculators!

< Dynamic and Equivalent Load Calculators

Equivalent Dynamic Load for Bearing given Radial Factor

LaTeX Go Equivalent Dynamic Load on Back to Back Bearing = (Radial Factor*Radial Load Acting on Bearing)+(Thrust Factor for Bearing*Axial or Thrust Load Acting on Bearing)

Equivalent Dynamic Load for Bearing given Rated Bearing Life

LaTeX Go Equivalent Dynamic Load on Back to Back Bearing = Dynamic Load Capacity of Bearing/(Rated Bearing Life^(1/Constant p of Bearing))

Dynamic Load Capacity for Bearing given Rated Bearing Life

LaTeX Go Dynamic Load Capacity of Bearing = Equivalent Dynamic Load on Back to Back Bearing*(Rated Bearing Life^(1/Constant p of Bearing))

Dynamic Load Capacity for Ball Bearing

LaTeX Go Dynamic Load Capacity of Bearing = Equivalent Dynamic Load on Back to Back Bearing*(Rated Bearing Life^(1/3))

Thrust Factor on Bearing given Equivalent Dynamic Load Formula

LaTeX Go

Thrust Factor for Bearing = (Equivalent Dynamic Load on Bearing-(Radial Factor*Race-Rotation Factor*Radial Load Acting on Bearing))/Axial or Thrust Load Acting on Bearing
Y = (P_eq-(X*V*F_r))/F_a

What is a rolling contact bearing?

The term rolling contact bearings refers to the wide variety of bearings that use spherical balls or some other type of roller between the stationary and the moving elements. The most common type of bearing supports a rotating shaft, resisting purely radial loads or a combination of radial and axial (thrust) loads.

How to Calculate Thrust Factor on Bearing given Equivalent Dynamic Load?

Thrust Factor on Bearing given Equivalent Dynamic Load calculator uses Thrust Factor for Bearing = (Equivalent Dynamic Load on Bearing-(Radial Factor*Race-Rotation Factor*Radial Load Acting on Bearing))/Axial or Thrust Load Acting on Bearing to calculate the Thrust Factor for Bearing, Thrust Factor on Bearing given Equivalent Dynamic Load is a factor to account for the thrust axial load acting onto the bearing. Thrust Factor for Bearing is denoted by Y symbol.

How to calculate Thrust Factor on Bearing given Equivalent Dynamic Load using this online calculator? To use this online calculator for Thrust Factor on Bearing given Equivalent Dynamic Load, enter Equivalent Dynamic Load on Bearing (P_eq), Radial Factor (X), Race-Rotation Factor (V), Radial Load Acting on Bearing (F_r) & Axial or Thrust Load Acting on Bearing (F_a) and hit the calculate button. Here is how the Thrust Factor on Bearing given Equivalent Dynamic Load calculation can be explained with given input values -> 1.413467 = (9650-(0.56*1.2*8050))/3000.

FAQ

What is Thrust Factor on Bearing given Equivalent Dynamic Load?

Thrust Factor on Bearing given Equivalent Dynamic Load is a factor to account for the thrust axial load acting onto the bearing and is represented as Y = (P_eq-(X*V*F_r))/F_a or Thrust Factor for Bearing = (Equivalent Dynamic Load on Bearing-(Radial Factor*Race-Rotation Factor*Radial Load Acting on Bearing))/Axial or Thrust Load Acting on Bearing. Equivalent dynamic load on bearing is defined as the net dynamic load on a rolling contact bearing, Radial Factor is used to denote the portion of the radial force contributing to equivalent bearing load, Race-rotation factor is a factor accounting for the rotation of the races of a bearing, Radial load acting on bearing is the amount of load onto the bearing acting radially & Axial or thrust load acting on bearing is the amount of thrust load onto the bearing acting axially.

How to calculate Thrust Factor on Bearing given Equivalent Dynamic Load?

Thrust Factor on Bearing given Equivalent Dynamic Load is a factor to account for the thrust axial load acting onto the bearing is calculated using Thrust Factor for Bearing = (Equivalent Dynamic Load on Bearing-(Radial Factor*Race-Rotation Factor*Radial Load Acting on Bearing))/Axial or Thrust Load Acting on Bearing. To calculate Thrust Factor on Bearing given Equivalent Dynamic Load, you need Equivalent Dynamic Load on Bearing (P_eq), Radial Factor (X), Race-Rotation Factor (V), Radial Load Acting on Bearing (F_r) & Axial or Thrust Load Acting on Bearing (F_a). With our tool, you need to enter the respective value for Equivalent Dynamic Load on Bearing, Radial Factor, Race-Rotation Factor, Radial Load Acting on Bearing & Axial or Thrust Load Acting on Bearing and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search