Throat Thickness given Area of Unsymmetrical Weld Calculator

✖Weld Bed Area is that area which is prepared by joining two metals for welding.ⓘ Weld Bed Area [A_{weld bed}]			+10% -10%
✖Total length of weld is the linear distance of total weld segment.ⓘ Total length of weld [L]			+10% -10%

✖The Throat Thickness is the shortest distance from the root to the face of the weld.ⓘ Throat Thickness given Area of Unsymmetrical Weld [t_throat]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Strength of Materials Formula PDF PDF Image

Throat Thickness given Area of Unsymmetrical Weld Solution

STEP 0: Pre-Calculation Summary

Formula Used

Throat Thickness = Weld Bed Area/(Total length of weld)
t_throat = A_{weld bed}/(L)
This formula uses 3 Variables

Variables Used

Throat Thickness - (Measured in Meter) - The Throat Thickness is the shortest distance from the root to the face of the weld.
Weld Bed Area - (Measured in Square Meter) - Weld Bed Area is that area which is prepared by joining two metals for welding.
Total length of weld - (Measured in Meter) - Total length of weld is the linear distance of total weld segment.

STEP 1: Convert Input(s) to Base Unit

Weld Bed Area: 900 Square Millimeter --> 0.0009 Square Meter (Check conversion here)
Total length of weld: 10 Millimeter --> 0.01 Meter (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

t_throat = A_{weld bed}/(L) --> 0.0009/(0.01)

Evaluating ... ...

t_throat = 0.09

STEP 3: Convert Result to Output's Unit

0.09 Meter -->90 Millimeter (Check conversion here)

FINAL ANSWER

90 Millimeter <-- Throat Thickness

(Calculation completed in 00.020 seconds)

You are here -

Home » Physics » Strength of Materials » Welded Joints » Analysis of Unsymmetrical Welded Sections which are Loaded Axially » Mechanical » Weld Parameters » Throat Thickness given Area of Unsymmetrical Weld

Credits

Created by Anshika Arya

National Institute Of Technology (NIT), Hamirpur

Anshika Arya has created this Calculator and 2000+ more calculators!

Verified by Payal Priya

Birsa Institute of Technology (BIT), Sindri

Payal Priya has verified this Calculator and 1900+ more calculators!

< Weld Parameters Calculators

Total Length of Weld given Length of Top Weld

LaTeX Go Total length of weld = (Length of Top Weld*(Distance of top weld from gravity axis+Distance of Bottom Weld from Gravity Axis))/Distance of Bottom Weld from Gravity Axis

Axial Load on Angle

LaTeX Go Axial load on angle = Resistance of weld per unit length*(Length of Top Weld+Length of Bottom Weld)

Axial Load on Angle given Resistance of Bottom and Top Weld

LaTeX Go Axial load on angle = Resistance of top weld+Resistance of bottom weld

Total Length of Weld given Length of Top and Bottom Weld

LaTeX Go Total length of weld = Length of Top Weld+Length of Bottom Weld

Throat Thickness given Area of Unsymmetrical Weld Formula

LaTeX Go

Throat Thickness = Weld Bed Area/(Total length of weld)
t_throat = A_{weld bed}/(L)

What is axial load and radial load?

Radial Load is defined as the maximum force that can be applied to the shaft in the radial direction (any direction perpendicular to the motor shaft axis). Axial Load is defined as the maximum force that can be applied to the shaft in the axial direction (in the same axis as or parallel to the motor shaft axis).

How to Calculate Throat Thickness given Area of Unsymmetrical Weld?

Throat Thickness given Area of Unsymmetrical Weld calculator uses Throat Thickness = Weld Bed Area/(Total length of weld) to calculate the Throat Thickness, The Throat thickness given area of unsymmetrical weld formula is defined as the shortest distance from the root to the face of the weld. Throat Thickness is denoted by t_throat symbol.

How to calculate Throat Thickness given Area of Unsymmetrical Weld using this online calculator? To use this online calculator for Throat Thickness given Area of Unsymmetrical Weld, enter Weld Bed Area (A_{weld bed}) & Total length of weld (L) and hit the calculate button. Here is how the Throat Thickness given Area of Unsymmetrical Weld calculation can be explained with given input values -> 90000 = 0.0009/(0.01).

FAQ

What is Throat Thickness given Area of Unsymmetrical Weld?

The Throat thickness given area of unsymmetrical weld formula is defined as the shortest distance from the root to the face of the weld and is represented as t_throat = A_{weld bed}/(L) or Throat Thickness = Weld Bed Area/(Total length of weld). Weld Bed Area is that area which is prepared by joining two metals for welding & Total length of weld is the linear distance of total weld segment.

How to calculate Throat Thickness given Area of Unsymmetrical Weld?

The Throat thickness given area of unsymmetrical weld formula is defined as the shortest distance from the root to the face of the weld is calculated using Throat Thickness = Weld Bed Area/(Total length of weld). To calculate Throat Thickness given Area of Unsymmetrical Weld, you need Weld Bed Area (A_{weld bed}) & Total length of weld (L). With our tool, you need to enter the respective value for Weld Bed Area & Total length of weld and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search