Throat Thickness for Fillet Weld Calculator

✖The thickness of plate is the state or quality of being thick. The measure of the smallest dimension of a solid figure: a board of two-inch thickness.ⓘ Thickness of Plate [t_plate]

+10%

-10%

✖The Throat Thickness is the shortest distance from the root to the face of the weld.ⓘ Throat Thickness for Fillet Weld [t_throat]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Strength of Materials Formula PDF PDF Image

Throat Thickness for Fillet Weld Solution

STEP 0: Pre-Calculation Summary

Formula Used

Throat Thickness = 0.707*Thickness of Plate
t_throat = 0.707*t_plate
This formula uses 2 Variables

Variables Used

Throat Thickness - (Measured in Meter) - The Throat Thickness is the shortest distance from the root to the face of the weld.
Thickness of Plate - (Measured in Meter) - The thickness of plate is the state or quality of being thick. The measure of the smallest dimension of a solid figure: a board of two-inch thickness.

STEP 1: Convert Input(s) to Base Unit

Thickness of Plate: 12 Millimeter --> 0.012 Meter (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

t_throat = 0.707*t_plate --> 0.707*0.012

Evaluating ... ...

t_throat = 0.008484

STEP 3: Convert Result to Output's Unit

0.008484 Meter -->8.484 Millimeter (Check conversion here)

FINAL ANSWER

8.484 Millimeter <-- Throat Thickness

(Calculation completed in 00.004 seconds)

You are here -

Home » Physics » Strength of Materials » Welded Joints » Types of Welded Joints » Mechanical » Weld Thickness » Throat Thickness for Fillet Weld

Credits

Created by Anshika Arya

National Institute Of Technology (NIT), Hamirpur

Anshika Arya has created this Calculator and 2000+ more calculators!

Verified by Payal Priya

Birsa Institute of Technology (BIT), Sindri

Payal Priya has verified this Calculator and 1900+ more calculators!

< Weld Thickness Calculators

Throat Thickness given Area of Fillet Weld for Double Fillet Lap Joint

LaTeX Go Throat Thickness = Weld Bed Area/(2*Length of Weld)

Throat Thickness given Area of Parallel Fillet Weld

LaTeX Go Throat Thickness = Weld Bed Area/(2*Length of Weld)

Throat Thickness given Area of Fillet Weld for Single Fillet Lap Joint

LaTeX Go Throat Thickness = Weld Bed Area/Length of Weld

Throat Thickness for Fillet Weld

LaTeX Go Throat Thickness = 0.707*Thickness of Plate

Throat Thickness for Fillet Weld Formula

LaTeX Go

Throat Thickness = 0.707*Thickness of Plate
t_throat = 0.707*t_plate

What is tensile strength with example?

Tensile strength is a measurement of the force required to pull something such as rope, wire, or a structural beam to the point where it breaks. The tensile strength of a material is the maximum amount of tensile stress that it can take before failure, for example, breaking.

How to Calculate Throat Thickness for Fillet Weld?

Throat Thickness for Fillet Weld calculator uses Throat Thickness = 0.707*Thickness of Plate to calculate the Throat Thickness, The Throat thickness for fillet weld formula is defined as distance through throat, as distinct from width or height. Throat Thickness is denoted by t_throat symbol.

How to calculate Throat Thickness for Fillet Weld using this online calculator? To use this online calculator for Throat Thickness for Fillet Weld, enter Thickness of Plate (t_plate) and hit the calculate button. Here is how the Throat Thickness for Fillet Weld calculation can be explained with given input values -> 8484 = 0.707*0.012.

FAQ

What is Throat Thickness for Fillet Weld?

The Throat thickness for fillet weld formula is defined as distance through throat, as distinct from width or height and is represented as t_throat = 0.707*t_plate or Throat Thickness = 0.707*Thickness of Plate. The thickness of plate is the state or quality of being thick. The measure of the smallest dimension of a solid figure: a board of two-inch thickness.

How to calculate Throat Thickness for Fillet Weld?

The Throat thickness for fillet weld formula is defined as distance through throat, as distinct from width or height is calculated using Throat Thickness = 0.707*Thickness of Plate. To calculate Throat Thickness for Fillet Weld, you need Thickness of Plate (t_plate). With our tool, you need to enter the respective value for Thickness of Plate and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Throat Thickness?

In this formula, Throat Thickness uses Thickness of Plate. We can use 3 other way(s) to calculate the same, which is/are as follows -

Throat Thickness = Weld Bed Area/Length of Weld
Throat Thickness = Weld Bed Area/(2*Length of Weld)
Throat Thickness = Weld Bed Area/(2*Length of Weld)

Home

FREE PDFs

🔍 Search