Throat Thickness given Area of Parallel Fillet Weld Solution

STEP 0: Pre-Calculation Summary
Formula Used
Throat Thickness = Weld Bed Area/(2*Length of Weld)
tthroat = Aweld bed/(2*l)
This formula uses 3 Variables
Variables Used
Throat Thickness - (Measured in Meter) - The Throat Thickness is the shortest distance from the root to the face of the weld.
Weld Bed Area - (Measured in Square Meter) - Weld Bed Area is that area which is prepared by joining two metals for welding.
Length of Weld - (Measured in Meter) - The Length of Weld is the linear distance of each weld segment.
STEP 1: Convert Input(s) to Base Unit
Weld Bed Area: 900 Square Millimeter --> 0.0009 Square Meter (Check conversion ​here)
Length of Weld: 8 Millimeter --> 0.008 Meter (Check conversion ​here)
STEP 2: Evaluate Formula
Substituting Input Values in Formula
tthroat = Aweld bed/(2*l) --> 0.0009/(2*0.008)
Evaluating ... ...
tthroat = 0.05625
STEP 3: Convert Result to Output's Unit
0.05625 Meter -->56.25 Millimeter (Check conversion ​here)
FINAL ANSWER
56.25 Millimeter <-- Throat Thickness
(Calculation completed in 00.004 seconds)

Credits

Creator Image
Created by Anshika Arya
National Institute Of Technology (NIT), Hamirpur
Anshika Arya has created this Calculator and 2000+ more calculators!
Verifier Image
Verified by Payal Priya
Birsa Institute of Technology (BIT), Sindri
Payal Priya has verified this Calculator and 1900+ more calculators!

Weld Thickness Calculators

Throat Thickness given Area of Fillet Weld for Double Fillet Lap Joint
​ LaTeX ​ Go Throat Thickness = Weld Bed Area/(2*Length of Weld)
Throat Thickness given Area of Parallel Fillet Weld
​ LaTeX ​ Go Throat Thickness = Weld Bed Area/(2*Length of Weld)
Throat Thickness given Area of Fillet Weld for Single Fillet Lap Joint
​ LaTeX ​ Go Throat Thickness = Weld Bed Area/Length of Weld
Throat Thickness for Fillet Weld
​ LaTeX ​ Go Throat Thickness = 0.707*Thickness of Plate

Throat Thickness given Area of Parallel Fillet Weld Formula

​LaTeX ​Go
Throat Thickness = Weld Bed Area/(2*Length of Weld)
tthroat = Aweld bed/(2*l)

What is tensile strength with example?

Tensile strength is a measurement of the force required to pull something such as rope, wire, or a structural beam to the point where it breaks. The tensile strength of a material is the maximum amount of tensile stress that it can take before failure, for example, breaking.

How to Calculate Throat Thickness given Area of Parallel Fillet Weld?

Throat Thickness given Area of Parallel Fillet Weld calculator uses Throat Thickness = Weld Bed Area/(2*Length of Weld) to calculate the Throat Thickness, Throat thickness given area of parallel fillet weld is defined as the distance through the throat, as distinct from width or height. Throat Thickness is denoted by tthroat symbol.

How to calculate Throat Thickness given Area of Parallel Fillet Weld using this online calculator? To use this online calculator for Throat Thickness given Area of Parallel Fillet Weld, enter Weld Bed Area (Aweld bed) & Length of Weld (l) and hit the calculate button. Here is how the Throat Thickness given Area of Parallel Fillet Weld calculation can be explained with given input values -> 56250 = 0.0009/(2*0.008).

FAQ

What is Throat Thickness given Area of Parallel Fillet Weld?
Throat thickness given area of parallel fillet weld is defined as the distance through the throat, as distinct from width or height and is represented as tthroat = Aweld bed/(2*l) or Throat Thickness = Weld Bed Area/(2*Length of Weld). Weld Bed Area is that area which is prepared by joining two metals for welding & The Length of Weld is the linear distance of each weld segment.
How to calculate Throat Thickness given Area of Parallel Fillet Weld?
Throat thickness given area of parallel fillet weld is defined as the distance through the throat, as distinct from width or height is calculated using Throat Thickness = Weld Bed Area/(2*Length of Weld). To calculate Throat Thickness given Area of Parallel Fillet Weld, you need Weld Bed Area (Aweld bed) & Length of Weld (l). With our tool, you need to enter the respective value for Weld Bed Area & Length of Weld and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
How many ways are there to calculate Throat Thickness?
In this formula, Throat Thickness uses Weld Bed Area & Length of Weld. We can use 3 other way(s) to calculate the same, which is/are as follows -
  • Throat Thickness = 0.707*Thickness of Plate
  • Throat Thickness = Weld Bed Area/Length of Weld
  • Throat Thickness = Weld Bed Area/(2*Length of Weld)
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!