Thin-Film Destructive Interference in Reflected Light Calculator

✖Integer is a whole number, either positive, negative, or zero, without a fractional part, used to represent a count or a quantity in various mathematical and real-world applications.ⓘ Integer [n]			+10% -10%
✖Wavelength is the distance between two consecutive peaks or troughs of a wave, which is a fundamental property of a wave that characterizes its spatial periodicity.ⓘ Wavelength [λ]			+10% -10%

✖Destructive Interference is a phenomenon that occurs when two or more waves overlap, resulting in a decrease in amplitude, often leading to cancellation or reduction of the wave's intensity.ⓘ Thin-Film Destructive Interference in Reflected Light [I_d]

⎘ Copy

👎

Formula

✖

Thin-Film Destructive Interference in Reflected Light

Formula

I d = n \cdot λ

Example

1.34 = 5 \cdot 26.8 cm

Calculator

LaTeX

Reset

👍

Download Wave Optics Formulas PDF PDF Image

Thin-Film Destructive Interference in Reflected Light Solution

STEP 0: Pre-Calculation Summary

Formula Used

Destructive Interference = Integer*Wavelength
I_d = n*λ
This formula uses 3 Variables

Variables Used

Destructive Interference - Destructive Interference is a phenomenon that occurs when two or more waves overlap, resulting in a decrease in amplitude, often leading to cancellation or reduction of the wave's intensity.
Integer - Integer is a whole number, either positive, negative, or zero, without a fractional part, used to represent a count or a quantity in various mathematical and real-world applications.
Wavelength - (Measured in Meter) - Wavelength is the distance between two consecutive peaks or troughs of a wave, which is a fundamental property of a wave that characterizes its spatial periodicity.

STEP 1: Convert Input(s) to Base Unit

Integer: 5 --> No Conversion Required
Wavelength: 26.8 Centimeter --> 0.268 Meter (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

I_d = n*λ --> 5*0.268

Evaluating ... ...

I_d = 1.34

STEP 3: Convert Result to Output's Unit

1.34 --> No Conversion Required

FINAL ANSWER

1.34 <-- Destructive Interference

(Calculation completed in 00.004 seconds)

You are here -

Home » Physics » Wave Optics » Basic Physics » Optics and Waves » Optics » Thin Film Interference and Optical Path Difference » Thin-Film Destructive Interference in Reflected Light

Credits

Created by Payal Priya

Birsa Institute of Technology (BIT), Sindri

Payal Priya has created this Calculator and 600+ more calculators!

Verified by Team Softusvista

Softusvista Office (Pune), India

Team Softusvista has verified this Calculator and 1100+ more calculators!

< 5 Thin Film Interference and Optical Path Difference Calculators

Optical Path Difference

Go Optical Path Difference = (Refractive Index-1)*Distance between Slits and Screen/Distance between Two Coherent Sources

Thin-Film Constructive Interference in Reflected Light

Go Constructive Interference = (Integer+1/2)*Wavelength

Thin-Film Destructive Interference in Transmitted Light

Go Destructive Interference = (Integer+1/2)*Wavelength

Thin-Film Constructive Interference in Transmitted Light

Go Constructive Interference = Integer*Wavelength

Thin-Film Destructive Interference in Reflected Light

Go Destructive Interference = Integer*Wavelength

Thin-Film Destructive Interference in Reflected Light Formula

Destructive Interference = Integer*Wavelength
I_d = n*λ

What is Reflected Light?

Reflected light is light that bounces off a surface rather than passing through it. The angle and intensity of the reflected light depend on the surface's properties and the angle of incidence. Reflected light can create images, colors, and patterns based on how it interacts with different surfaces.

How to Calculate Thin-Film Destructive Interference in Reflected Light?

Thin-Film Destructive Interference in Reflected Light calculator uses Destructive Interference = Integer*Wavelength to calculate the Destructive Interference, Thin-Film Destructive Interference in Reflected Light formula is defined as a measure of the intensity of light that is destructively interfered when reflected from a thin film, resulting in a decrease in brightness, which is dependent on the properties of the thin film and the light incident upon it. Destructive Interference is denoted by I_d symbol.

How to calculate Thin-Film Destructive Interference in Reflected Light using this online calculator? To use this online calculator for Thin-Film Destructive Interference in Reflected Light, enter Integer (n) & Wavelength (λ) and hit the calculate button. Here is how the Thin-Film Destructive Interference in Reflected Light calculation can be explained with given input values -> 1.34 = 5*0.268.

FAQ

What is Thin-Film Destructive Interference in Reflected Light?

Thin-Film Destructive Interference in Reflected Light formula is defined as a measure of the intensity of light that is destructively interfered when reflected from a thin film, resulting in a decrease in brightness, which is dependent on the properties of the thin film and the light incident upon it and is represented as I_d = n*λ or Destructive Interference = Integer*Wavelength. Integer is a whole number, either positive, negative, or zero, without a fractional part, used to represent a count or a quantity in various mathematical and real-world applications & Wavelength is the distance between two consecutive peaks or troughs of a wave, which is a fundamental property of a wave that characterizes its spatial periodicity.

How to calculate Thin-Film Destructive Interference in Reflected Light?

Thin-Film Destructive Interference in Reflected Light formula is defined as a measure of the intensity of light that is destructively interfered when reflected from a thin film, resulting in a decrease in brightness, which is dependent on the properties of the thin film and the light incident upon it is calculated using Destructive Interference = Integer*Wavelength. To calculate Thin-Film Destructive Interference in Reflected Light, you need Integer (n) & Wavelength (λ). With our tool, you need to enter the respective value for Integer & Wavelength and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Destructive Interference?

In this formula, Destructive Interference uses Integer & Wavelength. We can use 1 other way(s) to calculate the same, which is/are as follows -

Destructive Interference = (Integer+1/2)*Wavelength

Home

FREE PDFs

🔍 Search