Thickness of Tube when Heat transfer takes places from outside to inside surface of tube Calculator

✖Thermal Conductivity is rate of heat passes through specified material, expressed as amount of heat flows per unit time through a unit area with a temperature gradient of one degree per unit distance.ⓘ Thermal Conductivity [k]			+10% -10%
✖The Surface Area of a three-dimensional shape is the sum of all of the surface areas of each of the sides.ⓘ Surface Area [SA]			+10% -10%
✖Outside Surface Temperature is the Temperature at the outside surface of the tube.ⓘ Outside Surface Temperature [T₂]			+10% -10%
✖Inside Surface Temperature is the temperature at the inside surface of the tube.ⓘ Inside Surface temperature [T₃]			+10% -10%
✖Heat Transfer is the amount of heat that is transferred per unit of time in some material, usually measured in watts (joules per second).ⓘ Heat Transfer [q]			+10% -10%

✖Tube Thickness is the thickness of the tube defined by a gauge number.ⓘ Thickness of Tube when Heat transfer takes places from outside to inside surface of tube [x]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Heat Transfer Formulas PDF PDF Image

Thickness of Tube when Heat transfer takes places from outside to inside surface of tube Solution

STEP 0: Pre-Calculation Summary

Formula Used

Tube Thickness = (Thermal Conductivity*Surface Area*(Outside Surface Temperature-Inside Surface temperature))/Heat Transfer
x = (k*SA*(T₂-T₃))/q
This formula uses 6 Variables

Variables Used

Tube Thickness - (Measured in Meter) - Tube Thickness is the thickness of the tube defined by a gauge number.
Thermal Conductivity - (Measured in Watt per Meter per K) - Thermal Conductivity is rate of heat passes through specified material, expressed as amount of heat flows per unit time through a unit area with a temperature gradient of one degree per unit distance.
Surface Area - (Measured in Square Meter) - The Surface Area of a three-dimensional shape is the sum of all of the surface areas of each of the sides.
Outside Surface Temperature - (Measured in Kelvin) - Outside Surface Temperature is the Temperature at the outside surface of the tube.
Inside Surface temperature - (Measured in Kelvin) - Inside Surface Temperature is the temperature at the inside surface of the tube.
Heat Transfer - (Measured in Watt) - Heat Transfer is the amount of heat that is transferred per unit of time in some material, usually measured in watts (joules per second).

STEP 1: Convert Input(s) to Base Unit

Thermal Conductivity: 10.18 Watt per Meter per K --> 10.18 Watt per Meter per K No Conversion Required
Surface Area: 1.04 Square Meter --> 1.04 Square Meter No Conversion Required
Outside Surface Temperature: 310 Kelvin --> 310 Kelvin No Conversion Required
Inside Surface temperature: 302 Kelvin --> 302 Kelvin No Conversion Required
Heat Transfer: 7.54 Watt --> 7.54 Watt No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

x = (k*SA*(T₂-T₃))/q --> (10.18*1.04*(310-302))/7.54

Evaluating ... ...

x = 11.2331034482759

STEP 3: Convert Result to Output's Unit

11.2331034482759 Meter -->11233.1034482759 Millimeter (Check conversion here)

FINAL ANSWER

11233.1034482759 ≈ 11233.1 Millimeter <-- Tube Thickness

(Calculation completed in 00.014 seconds)

You are here -

Home » Physics » Refrigeration and Air Conditioning » Air Conditioning Systems » Mechanical » Heat Transfer » Thickness of Tube when Heat transfer takes places from outside to inside surface of tube

Credits

Created by Abhishek Dharmendra Bansile

Vishwakarma Institute of Information Technology, Pune (VIIT Pune), Pune

Abhishek Dharmendra Bansile has created this Calculator and 100+ more calculators!

Verified by sanjay shiva

national institute of technology hamirpur (NITH ), hamirpur , himachal pradesh

sanjay shiva has verified this Calculator and 100+ more calculators!

< Heat Transfer Calculators

Heat Rejection Factor

LaTeX Go Heat Rejection Factor = (Refrigeration Capacity+Compressor Work Done)/Refrigeration Capacity

Refrigeration Capacity given Load on Condenser

LaTeX Go Refrigeration Capacity = Load on Condenser-Compressor Work Done

Load on Condenser

LaTeX Go Load on Condenser = Refrigeration Capacity+Compressor Work Done

Heat Rejection Factor given COP

LaTeX Go Heat Rejection Factor = 1+(1/Coefficient of Performance of Refrigerator)

Thickness of Tube when Heat transfer takes places from outside to inside surface of tube Formula

LaTeX Go

Tube Thickness = (Thermal Conductivity*Surface Area*(Outside Surface Temperature-Inside Surface temperature))/Heat Transfer
x = (k*SA*(T₂-T₃))/q

Natural convection air-cooled condensers

In natural convection air-cooled condenser, the heat transfer from the condenser coils to the air is by natural convection. As the air comes in contact with the warm condenser tubes, it absorbs heat from the refrigerant, and thus the temperature of the air increases. The warm air, being lighter, rises up and the cold air from below rises
to take away the heat from the condenser.

Forced convection air-cooled condensers

In forced convection air-cooled condensers, the fan (either propeller or centrifugal) is used to force the air over the condenser coils to increase its heat transfer capacity. The forced convection condensers may be divided into the following two groups:
(a) Base mounted air-cooled condensers, and
(b) Remote air-cooled condensers.

How to Calculate Thickness of Tube when Heat transfer takes places from outside to inside surface of tube?

Thickness of Tube when Heat transfer takes places from outside to inside surface of tube calculator uses Tube Thickness = (Thermal Conductivity*Surface Area*(Outside Surface Temperature-Inside Surface temperature))/Heat Transfer to calculate the Tube Thickness, Thickness of Tube when Heat transfer takes places from outside to inside surface of tube formula is defined as a measure of the tube's thickness required for efficient heat transfer from the outer surface to the inner surface, considering the thermal conductivity, surface area, and temperature differences. Tube Thickness is denoted by x symbol.

How to calculate Thickness of Tube when Heat transfer takes places from outside to inside surface of tube using this online calculator? To use this online calculator for Thickness of Tube when Heat transfer takes places from outside to inside surface of tube, enter Thermal Conductivity (k), Surface Area (SA), Outside Surface Temperature (T₂), Inside Surface temperature (T₃) & Heat Transfer (q) and hit the calculate button. Here is how the Thickness of Tube when Heat transfer takes places from outside to inside surface of tube calculation can be explained with given input values -> 1.1E+7 = (10.18*1.04*(310-302))/7.54.

FAQ

What is Thickness of Tube when Heat transfer takes places from outside to inside surface of tube?

Thickness of Tube when Heat transfer takes places from outside to inside surface of tube formula is defined as a measure of the tube's thickness required for efficient heat transfer from the outer surface to the inner surface, considering the thermal conductivity, surface area, and temperature differences and is represented as x = (k*SA*(T₂-T₃))/q or Tube Thickness = (Thermal Conductivity*Surface Area*(Outside Surface Temperature-Inside Surface temperature))/Heat Transfer. Thermal Conductivity is rate of heat passes through specified material, expressed as amount of heat flows per unit time through a unit area with a temperature gradient of one degree per unit distance, The Surface Area of a three-dimensional shape is the sum of all of the surface areas of each of the sides, Outside Surface Temperature is the Temperature at the outside surface of the tube, Inside Surface Temperature is the temperature at the inside surface of the tube & Heat Transfer is the amount of heat that is transferred per unit of time in some material, usually measured in watts (joules per second).

How to calculate Thickness of Tube when Heat transfer takes places from outside to inside surface of tube?

Thickness of Tube when Heat transfer takes places from outside to inside surface of tube formula is defined as a measure of the tube's thickness required for efficient heat transfer from the outer surface to the inner surface, considering the thermal conductivity, surface area, and temperature differences is calculated using Tube Thickness = (Thermal Conductivity*Surface Area*(Outside Surface Temperature-Inside Surface temperature))/Heat Transfer. To calculate Thickness of Tube when Heat transfer takes places from outside to inside surface of tube, you need Thermal Conductivity (k), Surface Area (SA), Outside Surface Temperature (T₂), Inside Surface temperature (T₃) & Heat Transfer (q). With our tool, you need to enter the respective value for Thermal Conductivity, Surface Area, Outside Surface Temperature, Inside Surface temperature & Heat Transfer and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search