Thickness of Stock given Stripper Force Calculator

✖Stripper Force is the force applied by a stripper plate or stripper ring to remove the formed part from the punch after the forming operation is completed.ⓘ Stripper Force [P_s]			+10% -10%
✖Stripping Constant is the empirical constant used to calculate stripping force which is the force applied by a stripper plate.ⓘ Stripping Constant [K]			+10% -10%
✖Perimeter of Cut is the total length of the cut edge produced in a material during the punching process.ⓘ Perimeter of Cut [L_cut]			+10% -10%

✖Blank Thickness is the thickness of the material being worked on before any operations are performed on it.ⓘ Thickness of Stock given Stripper Force [t_blank]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Sheet Metal Operations Formulas PDF PDF Image

Thickness of Stock given Stripper Force Solution

STEP 0: Pre-Calculation Summary

Formula Used

Blank Thickness = Stripper Force/(Stripping Constant*Perimeter of Cut)
t_blank = P_s/(K*L_cut)
This formula uses 4 Variables

Variables Used

Blank Thickness - (Measured in Meter) - Blank Thickness is the thickness of the material being worked on before any operations are performed on it.
Stripper Force - (Measured in Newton) - Stripper Force is the force applied by a stripper plate or stripper ring to remove the formed part from the punch after the forming operation is completed.
Stripping Constant - Stripping Constant is the empirical constant used to calculate stripping force which is the force applied by a stripper plate.
Perimeter of Cut - (Measured in Meter) - Perimeter of Cut is the total length of the cut edge produced in a material during the punching process.

STEP 1: Convert Input(s) to Base Unit

Stripper Force: 0.000111 Newton --> 0.000111 Newton No Conversion Required
Stripping Constant: 0.02 --> No Conversion Required
Perimeter of Cut: 616.6667 Millimeter --> 0.6166667 Meter (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

t_blank = P_s/(K*L_cut) --> 0.000111/(0.02*0.6166667)

Evaluating ... ...

t_blank = 0.00899999951351354

STEP 3: Convert Result to Output's Unit

0.00899999951351354 Meter -->8.99999951351354 Millimeter (Check conversion here)

FINAL ANSWER

8.99999951351354 ≈ 9 Millimeter <-- Blank Thickness

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Production Engineering » Sheet Metal Operations » Stripping Operation » Thickness of Stock given Stripper Force

Credits

Created by Rajat Vishwakarma

University Institute of Technology RGPV (UIT - RGPV), Bhopal

Rajat Vishwakarma has created this Calculator and 400+ more calculators!

Verified by Nishan Poojary

Shri Madhwa Vadiraja Institute of Technology and Management (SMVITM), Udupi

Nishan Poojary has verified this Calculator and 400+ more calculators!

< Stripping Operation Calculators

Thickness of Stock given Stripper Force

LaTeX Go Blank Thickness = Stripper Force/(Stripping Constant*Perimeter of Cut)

Perimeter of Cut given Stripper Force

LaTeX Go Perimeter of Cut = Stripper Force/(Stripping Constant*Blank Thickness)

Stripping Force

LaTeX Go Stripper Force = Stripping Constant*Perimeter of Cut*Blank Thickness

Thickness of Stock given Stripper Force Formula

LaTeX Go

Blank Thickness = Stripper Force/(Stripping Constant*Perimeter of Cut)
t_blank = P_s/(K*L_cut)

What is stripping ?

Due to the release of the stored elastic energy in the stock left on the die, the stock tends to grip the punch as the punch moves upward. This necessitates the use of a stripper to separate the punch from the stock. The force required for stripping depends, besides the material, on other factors such as the position and size of the punched hole.

How to Calculate Thickness of Stock given Stripper Force?

Thickness of Stock given Stripper Force calculator uses Blank Thickness = Stripper Force/(Stripping Constant*Perimeter of Cut) to calculate the Blank Thickness, Thickness of Stock given Stripper Force, is the thickness of the sheet metal stock based on the force applied by the stripper during the stripping process and calculated as the stripper force divided by the product of the stripping constant and the perimeter of the cut from punching. Blank Thickness is denoted by t_blank symbol.

How to calculate Thickness of Stock given Stripper Force using this online calculator? To use this online calculator for Thickness of Stock given Stripper Force, enter Stripper Force (P_s), Stripping Constant (K) & Perimeter of Cut (L_cut) and hit the calculate button. Here is how the Thickness of Stock given Stripper Force calculation can be explained with given input values -> 9000 = 0.000111/(0.02*0.6166667).

FAQ

What is Thickness of Stock given Stripper Force?

Thickness of Stock given Stripper Force, is the thickness of the sheet metal stock based on the force applied by the stripper during the stripping process and calculated as the stripper force divided by the product of the stripping constant and the perimeter of the cut from punching and is represented as t_blank = P_s/(K*L_cut) or Blank Thickness = Stripper Force/(Stripping Constant*Perimeter of Cut). Stripper Force is the force applied by a stripper plate or stripper ring to remove the formed part from the punch after the forming operation is completed, Stripping Constant is the empirical constant used to calculate stripping force which is the force applied by a stripper plate & Perimeter of Cut is the total length of the cut edge produced in a material during the punching process.

How to calculate Thickness of Stock given Stripper Force?

Thickness of Stock given Stripper Force, is the thickness of the sheet metal stock based on the force applied by the stripper during the stripping process and calculated as the stripper force divided by the product of the stripping constant and the perimeter of the cut from punching is calculated using Blank Thickness = Stripper Force/(Stripping Constant*Perimeter of Cut). To calculate Thickness of Stock given Stripper Force, you need Stripper Force (P_s), Stripping Constant (K) & Perimeter of Cut (L_cut). With our tool, you need to enter the respective value for Stripper Force, Stripping Constant & Perimeter of Cut and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search