Thickness of Rectangular Plate with Transverse Hole given Nominal Stress Calculator

✖The Load on Flat Plate is the force applied uniformly across a flat surface, affecting the plate's structural integrity and performance under various loading conditions.ⓘ Load on Flat Plate [P]			+10% -10%
✖The Width of Plate is the measurement across the plate, influencing its strength and performance under fluctuating loads in mechanical design applications.ⓘ Width of Plate [w]			+10% -10%
✖The Diameter of Transverse Hole in Plate is the measurement across the widest part of a hole in a plate, affecting stress distribution and structural integrity.ⓘ Diameter of Transverse Hole in Plate [d_h]			+10% -10%
✖The Nominal Stress is the average stress experienced by a material under load, used to assess its performance and safety in mechanical design applications.ⓘ Nominal Stress [σ_o]			+10% -10%

✖The Thickness of Plate is the measurement of how thick a plate material is, which influences its strength and ability to withstand applied loads in mechanical design.ⓘ Thickness of Rectangular Plate with Transverse Hole given Nominal Stress [t]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Stress Concentration Factors in Design Formulas PDF PDF Image

Thickness of Rectangular Plate with Transverse Hole given Nominal Stress Solution

STEP 0: Pre-Calculation Summary

Formula Used

Thickness of Plate = Load on Flat Plate/((Width of Plate-Diameter of Transverse Hole in Plate)*Nominal Stress)
t = P/((w-d_h)*σ_o)
This formula uses 5 Variables

Variables Used

Thickness of Plate - (Measured in Meter) - The Thickness of Plate is the measurement of how thick a plate material is, which influences its strength and ability to withstand applied loads in mechanical design.
Load on Flat Plate - (Measured in Newton) - The Load on Flat Plate is the force applied uniformly across a flat surface, affecting the plate's structural integrity and performance under various loading conditions.
Width of Plate - (Measured in Meter) - The Width of Plate is the measurement across the plate, influencing its strength and performance under fluctuating loads in mechanical design applications.
Diameter of Transverse Hole in Plate - (Measured in Meter) - The Diameter of Transverse Hole in Plate is the measurement across the widest part of a hole in a plate, affecting stress distribution and structural integrity.
Nominal Stress - (Measured in Pascal) - The Nominal Stress is the average stress experienced by a material under load, used to assess its performance and safety in mechanical design applications.

STEP 1: Convert Input(s) to Base Unit

Load on Flat Plate: 8750 Newton --> 8750 Newton No Conversion Required
Width of Plate: 70 Millimeter --> 0.07 Meter (Check conversion here)
Diameter of Transverse Hole in Plate: 35.01 Millimeter --> 0.03501 Meter (Check conversion here)
Nominal Stress: 25 Newton per Square Millimeter --> 25000000 Pascal (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

t = P/((w-d_h)*σ_o) --> 8750/((0.07-0.03501)*25000000)

Evaluating ... ...

t = 0.010002857959417

STEP 3: Convert Result to Output's Unit

0.010002857959417 Meter -->10.002857959417 Millimeter (Check conversion here)

FINAL ANSWER

10.002857959417 ≈ 10.00286 Millimeter <-- Thickness of Plate

(Calculation completed in 00.021 seconds)

You are here -

Home » Engineering » Mechanical » Machine Design » Design against Fluctuating Load » Stress Concentration Factors in Design » Rectangular Plate against Fluctuating Loads » Thickness of Rectangular Plate with Transverse Hole given Nominal Stress

Credits

Created by Saurabh Patil

Shri Govindram Seksaria Institute of Technology and Science (SGSITS ), Indore

Saurabh Patil has created this Calculator and 700+ more calculators!

Verified by Ravi Khiyani

Shri Govindram Seksaria Institute of Technology and Science (SGSITS), Indore

Ravi Khiyani has verified this Calculator and 300+ more calculators!

< Rectangular Plate against Fluctuating Loads Calculators

Nominal Tensile Stress in Rectangular Plate with Transverse Hole

LaTeX Go Nominal Stress = Load on Flat Plate/((Width of Plate-Diameter of Transverse Hole in Plate)*Thickness of Plate)

Width of Rectangular Plate with Transverse Hole given Nominal Stress

LaTeX Go Width of Plate = Load on Flat Plate/(Thickness of Plate*Nominal Stress)+Diameter of Transverse Hole in Plate

Load on Rectangular Plate with Transverse Hole given Nominal Stress

LaTeX Go Load on Flat Plate = Nominal Stress*(Width of Plate-Diameter of Transverse Hole in Plate)*Thickness of Plate

Highest Value of Actual Stress near Discontinuity

LaTeX Go Highest Value of Actual Stress near Discontinuity = Fatigue Stress Concentration Factor*Nominal Stress

Thickness of Rectangular Plate with Transverse Hole given Nominal Stress Formula

LaTeX Go

Thickness of Plate = Load on Flat Plate/((Width of Plate-Diameter of Transverse Hole in Plate)*Nominal Stress)
t = P/((w-d_h)*σ_o)

What could be the factors for Variation in Properties of Materials?

In the design of machine components, it is assumed that the material is homogeneous throughout the component. In practice, there is variation in material properties from one end to another due to the following factors:
(a) Internal cracks and flaws like blowholes.
(b) Cavities in welds.
(c) Air holes in steel components.
(d) Nonmetallic or foreign inclusions.

How to Calculate Thickness of Rectangular Plate with Transverse Hole given Nominal Stress?

Thickness of Rectangular Plate with Transverse Hole given Nominal Stress calculator uses Thickness of Plate = Load on Flat Plate/((Width of Plate-Diameter of Transverse Hole in Plate)*Nominal Stress) to calculate the Thickness of Plate, The Thickness of Rectangular plate with Transverse hole given Nominal stress is the thickness or the smallest dimension of a rectangular plate with a transverse hole with stress concentration. Thickness of Plate is denoted by t symbol.

How to calculate Thickness of Rectangular Plate with Transverse Hole given Nominal Stress using this online calculator? To use this online calculator for Thickness of Rectangular Plate with Transverse Hole given Nominal Stress, enter Load on Flat Plate (P), Width of Plate (w), Diameter of Transverse Hole in Plate (d_h) & Nominal Stress (σ_o) and hit the calculate button. Here is how the Thickness of Rectangular Plate with Transverse Hole given Nominal Stress calculation can be explained with given input values -> 10000 = 8750/((0.07-0.03501)*25000000).

FAQ

What is Thickness of Rectangular Plate with Transverse Hole given Nominal Stress?

The Thickness of Rectangular plate with Transverse hole given Nominal stress is the thickness or the smallest dimension of a rectangular plate with a transverse hole with stress concentration and is represented as t = P/((w-d_h)*σ_o) or Thickness of Plate = Load on Flat Plate/((Width of Plate-Diameter of Transverse Hole in Plate)*Nominal Stress). The Load on Flat Plate is the force applied uniformly across a flat surface, affecting the plate's structural integrity and performance under various loading conditions, The Width of Plate is the measurement across the plate, influencing its strength and performance under fluctuating loads in mechanical design applications, The Diameter of Transverse Hole in Plate is the measurement across the widest part of a hole in a plate, affecting stress distribution and structural integrity & The Nominal Stress is the average stress experienced by a material under load, used to assess its performance and safety in mechanical design applications.

How to calculate Thickness of Rectangular Plate with Transverse Hole given Nominal Stress?

The Thickness of Rectangular plate with Transverse hole given Nominal stress is the thickness or the smallest dimension of a rectangular plate with a transverse hole with stress concentration is calculated using Thickness of Plate = Load on Flat Plate/((Width of Plate-Diameter of Transverse Hole in Plate)*Nominal Stress). To calculate Thickness of Rectangular Plate with Transverse Hole given Nominal Stress, you need Load on Flat Plate (P), Width of Plate (w), Diameter of Transverse Hole in Plate (d_h) & Nominal Stress (σ_o). With our tool, you need to enter the respective value for Load on Flat Plate, Width of Plate, Diameter of Transverse Hole in Plate & Nominal Stress and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search