Thickness of Plate given Throat Thickness for Fillet Weld Calculator

✖The Throat Thickness is the shortest distance from the root to the face of the weld.ⓘ Throat Thickness [t_throat]

+10%

-10%

✖The thickness of plate is the state or quality of being thick. The measure of the smallest dimension of a solid figure: a board of two-inch thickness.ⓘ Thickness of Plate given Throat Thickness for Fillet Weld [t_plate]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Strength of Materials Formula PDF PDF Image

Thickness of Plate given Throat Thickness for Fillet Weld Solution

STEP 0: Pre-Calculation Summary

Formula Used

Thickness of Plate = Throat Thickness/0.707
t_plate = t_throat/0.707
This formula uses 2 Variables

Variables Used

Thickness of Plate - (Measured in Meter) - The thickness of plate is the state or quality of being thick. The measure of the smallest dimension of a solid figure: a board of two-inch thickness.
Throat Thickness - (Measured in Meter) - The Throat Thickness is the shortest distance from the root to the face of the weld.

STEP 1: Convert Input(s) to Base Unit

Throat Thickness: 50 Millimeter --> 0.05 Meter (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

t_plate = t_throat/0.707 --> 0.05/0.707

Evaluating ... ...

t_plate = 0.0707213578500707

STEP 3: Convert Result to Output's Unit

0.0707213578500707 Meter -->70.7213578500707 Millimeter (Check conversion here)

FINAL ANSWER

70.7213578500707 ≈ 70.72136 Millimeter <-- Thickness of Plate

(Calculation completed in 00.020 seconds)

You are here -

Home » Physics » Strength of Materials » Welded Joints » Types of Welded Joints » Mechanical » Thickness of Plate » Thickness of Plate given Throat Thickness for Fillet Weld

Credits

Created by Anshika Arya

National Institute Of Technology (NIT), Hamirpur

Anshika Arya has created this Calculator and 2000+ more calculators!

Verified by Payal Priya

Birsa Institute of Technology (BIT), Sindri

Payal Priya has verified this Calculator and 1900+ more calculators!

< Thickness of Plate Calculators

Thickness of Plate given Area of Double Fillet Lap Joint Weld

LaTeX Go Thickness of Plate = Weld Bed Area/(1.414*Length of Weld)

Thickness of Plate given Area of Single Fillet Lap Joint Weld

LaTeX Go Thickness of Plate = Weld Bed Area/(0.707*Length of Weld)

Thickness of Plate given Area of Parallel Fillet Weld

LaTeX Go Thickness of Plate = Weld Bed Area/(1.414*Length of Weld)

Thickness of Plate given Throat Thickness for Fillet Weld

LaTeX Go Thickness of Plate = Throat Thickness/0.707

Thickness of Plate given Throat Thickness for Fillet Weld Formula

LaTeX Go

Thickness of Plate = Throat Thickness/0.707
t_plate = t_throat/0.707

What is tensile strength with example?

Tensile strength is a measurement of the force required to pull something such as rope, wire, or a structural beam to the point where it breaks. The tensile strength of a material is the maximum amount of tensile stress that it can take before failure, for example breaking.

How to Calculate Thickness of Plate given Throat Thickness for Fillet Weld?

Thickness of Plate given Throat Thickness for Fillet Weld calculator uses Thickness of Plate = Throat Thickness/0.707 to calculate the Thickness of Plate, Thickness of plate given throat thickness for fillet weld is the distance through the plate, as distinct from width or height. Thickness of Plate is denoted by t_plate symbol.

How to calculate Thickness of Plate given Throat Thickness for Fillet Weld using this online calculator? To use this online calculator for Thickness of Plate given Throat Thickness for Fillet Weld, enter Throat Thickness (t_throat) and hit the calculate button. Here is how the Thickness of Plate given Throat Thickness for Fillet Weld calculation can be explained with given input values -> 70721.36 = 0.05/0.707.

FAQ

What is Thickness of Plate given Throat Thickness for Fillet Weld?

Thickness of plate given throat thickness for fillet weld is the distance through the plate, as distinct from width or height and is represented as t_plate = t_throat/0.707 or Thickness of Plate = Throat Thickness/0.707. The Throat Thickness is the shortest distance from the root to the face of the weld.

How to calculate Thickness of Plate given Throat Thickness for Fillet Weld?

Thickness of plate given throat thickness for fillet weld is the distance through the plate, as distinct from width or height is calculated using Thickness of Plate = Throat Thickness/0.707. To calculate Thickness of Plate given Throat Thickness for Fillet Weld, you need Throat Thickness (t_throat). With our tool, you need to enter the respective value for Throat Thickness and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Thickness of Plate?

In this formula, Thickness of Plate uses Throat Thickness. We can use 3 other way(s) to calculate the same, which is/are as follows -

Thickness of Plate = Weld Bed Area/(1.414*Length of Weld)
Thickness of Plate = Weld Bed Area/(1.414*Length of Weld)
Thickness of Plate = Weld Bed Area/(0.707*Length of Weld)

Home

FREE PDFs

🔍 Search